LED Flashlight Accessories: Cases, Diffusers, Clips and Mounts

Designed for those who move quickly between city, work, and travel, the SLB08 Modular Sling Bag by Nitecore x Lii Gear is a compact bag that combines urban minimalism and tactical modularity. Ultra-lightweight (only 125 g) but surprisingly versatile, it adapts to any situation: from the subway to intercontinental flights, from cycling to evening strolls.

It's not just a simple sling bag: it's an expandable modular system that can grow with your daily needs.

Features

The SLB08 was created in the Lii Gear laboratory in Beijing, which has specialized in modular transport systems since 2014. Compact like a minimalist sling, expandable like a tactical platform.

Technical Data
Material: 500D nylon
Capacity: 2L
Dimensions: 27x4x16
Weight: 125g

Perfect for:
* Smartphone
* Power bank
* Earphones
* Wallet
* Passport and documents
* Keys and everyday EDC

The SLB08 can be used in five configurations:
* Sling bag
* Fanny pack
* Crossbody
* Utility pouch
* Additional bag attached to other backpacks

Structure and materials
* Scratch and abrasion-resistant 500D nylon
* Double-slider YKK zippers
* High-durability UTX buckles
* Quick-adjust strap that can be used with one hand

Smart organization
* Two transparent compartments with honeycomb mesh
* Internal divider separates phone, keys, and wallet
* Transparent front pocket for instant visibility
* Find what you need in a flash, even when you're in a hurry.

Document compartment
* The rear compartment in breathable transparent mesh allows you to:
* View your boarding pass and passport
* Pass through airport security without opening your bag

Modularity
The SLB08 features MOLLE webbing on:
* Sides
* Bottom
* Shoulder strap

You can:
* Attach flashlights
* Secure a bottle with elastic bands
* Add pouches and accessories
* Mount mosquito repellents or other outdoor tools

Perfect for travel
* Soft structure that folds flat in a suitcase or backpack
* Unfolds in seconds for everyday use once you arrive at your destination

What makes the SLB08 different
Proven design - Lii Gear is known for products such as Fugu Bomb and Mr. Octopus, which are appreciated for their build quality and functional design.

Transparent organization - Honeycomb mesh and clear front pocket allow you to check and locate contents immediately.

True modularity - Four rear attachment points and MOLLE compatibility for real integration with other systems.

Controlled craftsmanship - Made in small batches in the Lii Gear workshop, with attention to detail and manual quality control.

Discover the Kydex holster designed for the NITECORE NPL25 and NPL25GL tactical flashlights, an ideal solution for those seeking safety, convenience and durability.

Compatible with Glock 17 and Glock 19 models, it offers a Level 2 thumb-press release system for quick access to the weapon.

Made of sturdy 2.36 Kydex, it features a removable stainless steel clip for stable and secure attachment. Available in black, it is the perfect choice for professionals and tactical shooting enthusiasts.

Compatibility: Glock 17 and Glock 19 models
Release: Level 2 thumb pressure
Material: Kydex 2.36
Fastening: stainless steel clip, removable
Available colors: Black

Original Nitecore remote switch to be used by replacing the tail cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical, or airsoft purposes.

Once installed, it allows for temporary activation of the light by pressing the dedicated rubber remote pad; the light will turn off as soon as pressure on the pad is released. Additionally, it also integrates a standard power button on the side for normal flashlight use.

Compatible only with models:

MH12 PRO - MH25 PRO

The Nitecore GM02 Pro is made of aerospace aluminum alloy with HA III military-grade hard-anodized finish for high durability.

A large stainless steel thumb nut allows for adjustment and ensures stable mounting on a Picatinny rail.

It can accommodate flashlights with a body diameter from 25.8mm to 26.5mm and fits models like

Nitecore SRT7 SRT7i, SRT6i, MH12 Pro, and MH25 Pro.

Dimensions L-4.83 cm x W-4.29 cm x H-4.29 cm

Weight 68 grams

Genuine Nitecore elastic headband designed as a replacement part for headlamps compatible with a 25 mm mounting height (pitch). Made from high-quality materials, it guarantees wear resistance, long-lasting elasticity, and optimal comfort even during prolonged use.

The adjustable design ensures a perfect fit on the head, keeping the headlamp stable even during intense movement. The desert color, understated and technical, is ideal for outdoor, professional, and operational activities.

Key Features:

Original Nitecore replacement elastic headband
Height (pitch): 25 mm
High elasticity and long-lasting durability
Comfort and stability during use
Color: Desert

Compatibility:
Compatible with all headlamps equipped with a 25 mm headband and, specifically, with the following Nitecore models:
HA23, HA25, HA27, NU05, NU06, NU07, NU25, NU27.

Applications:
Ideal as a replacement for a worn headband or as a spare part to ensure the headlamp’s full efficiency in any usage scenario.

Nylon tactical belt sheath, with magnetic closure, designed to prevent accidental activation while carrying.

Compatibility:
* NITECORE P20i
* NITECORE P20iX
* NITECORE MH12 PRO

Dimensions:
155mm x 59mm x 50mm.

Material:
Nylon with quick-release rear belt loop and rigid polymer hook

The LMA1 is an ARC Ops-Core compatible military helmet mount, specially designed for law enforcement, fire, search and rescue.

It can hold a torch with a standard 1 "(25.4mm) tube diameter and rotates 360 ° with quick and easy adjustment in 8 directions.

Constructed from aerodynamic grade aluminum alloy with HA III military grade hard anodized finish, it is lightweight, durable and with excellent impact resistance. Perfect for law enforcement, firefighters and search and rescue.

Specifications:
Tube diameter: 1 inch (2.54cm), which means it fits all 1 "body torches.
Length: 4.50 cm
Width: 4.40 cm
Height: 4.29
Weight: 1.59 oz

Material: aero grade aluminum alloy
Finish: HAIII military grade anodized

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

Original Nitecore remote control to be used by replacing the rear cap of your flashlight; ideal to be used with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is mounted in place of the original cap of the flashlight and a removable remote cable that attaches via USB-C plug. Once plugged in, it allows both the temporary switching on of the light (the light is emitted by pressing and holding the pad, it turns off by releasing it) and the strobe function through a dedicated button; it also allows the fixed switching on of the light with the subsequent possibility to vary its light power.

On the back, the aluminum cap has also a standard integrated power button that allows to use the flashlight normally (on and off), but that does not allow to select the light power or the STROBO light.

Diameter cap: 28.6mm
Total cable length: 307mm

Compatible only with models

P10i, P20i and P30i

Ultra-transparent green filter with rubber body adaptable to different types of torches with 25 / 25.5mm diameter heads.

This filter transforms the beam of your flashlight into a green light that is excellent for use at the same time as night vision goggles and suitable for not frightening animals. Also suitable for tactical reading of maps and various documentation.

Compatibility:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Filtro azul ultra transparente con cuerpo de goma adaptable a diferentes tipos de antorchas con cabezas de 25 / 25,5mm de diámetro.

Este filtro transforma el haz de tu linterna en una excelente luz azul para ser utilizada al mismo tiempo que las gafas de noche y adecuada para no asustar a los animales. También es adecuado para la lectura táctica de mapas y documentación diversa.

Compatibilidad:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Ultra-transparent red filter with rubber body adaptable to different types of torches with 25 / 25.5mm diameter heads.

This filter transforms the beam of your flashlight into excellent red light to be used together with night vision goggles and suitable not to scare animals. Also suitable for tactical reading of maps and various documentation.

Compatibility:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Accessory for Nitecore tactical flashlights made of aeronautical aluminum with HA III type military anodization, it is compatible with any flashlight that has a 1 "(2.54cm) diameter barrel.

Compatible with Picatinny rails, it has dimensions of 71mm (height) x 30mm (width) x 31mm (length) and a weight of 73g.

* Easy to attach and remove
* Central fixing screw that does not require tools
* Compatible with 1 "/ 2.54cm cylindrical shaft flashlights

Original Nitecore remote ignition control to be used by replacing the rear cap of your flashlight; ideal for use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary switching on of the light by pressing the special remote rubber pad; the light will go out as soon as the pressure on the pad is stopped. It also integrates a standard power button on the side which allows the torch to be used normally.

Cap diameter: 28.6mm
Total length: 307mm

Compatible only with models:

NEW P12 - NEW P30

Headlamp designed only for NVG type hooks for helmets and tactical helmets equipped with this system. Designed mainly for military and soft air use or for tactical sector operators (police, firefighters etc.)

Powers and durations certified by ANSI / NEMA FL1 standards tested with 1x 18650 3.6V 3400mAh

LED: 1x Cree XM-L2 U2 with 50,000 hour life cycle
Output 5 constant light outputs, digitally regulated and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (680 h.) -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.)
Range: up to 117mt.
Power peak: 3400 candles
Usable batteries: 1x 18650 3.7V (included in the package) or 2x CR123A 3.0 / 3.7V disposable or rechargeable
Torch dimensions: 83.5x50x46mm. (with stand included)
Weight: 98.5g (without battery)
Lens: in hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Attachment: support compatible with NVG type helmet attachments
Notes: water resistant as per IPX7 standard, submersible at 1mt. depth for 30min.
Included Accessories: 1x 18650 3.7V 3400mAh battery - USB / MicroUSB charging cable - front elastic strap - spare o-ring
Integrated Charging System: through the integrated MicroUSB port - protected by an insulated cover - and using the Micro-USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special bright LED located next to it under the luminous selection buttons. The charging cable can be attached to any PC with a USB port or to any wall power supply or from a cigarette lighter with a USB port.

Green filter made of ultra-transparent hardened glass with rubber body, so that it can be adapted to different types of torches with 70mm diameter heads.

This filter transforms the beam of your torch into red light suitable for hiking, outdoor and for hunting purposes since it does not scare and alert the animals. Also suitable for tactical reading of maps and various documentation.

Compatibility: only for NITECORE MH40GTR

Red filter made of ultra-transparent hardened glass with rubber body, so that it can be adapted to different types of torches with 70mm diameter heads.

This filter transforms the beam of your torch into excellent red light to be used together with night vision devices and suitable for not frightening animals. Also suitable for tactical reading of maps and various documentation.

Compatibility: only for NITECORE MH40GTR

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GTS, MH25GTS, P12GTS

Urban / hiking backpack made of Nylon 600 denier, very light and resistant, also designed to accommodate electronic devices and laptops up to 14 "

Features and Materials:
- 600 denier Cordura Nylon resistant to water and abrasion
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for intensive use
- Main compartment and front compartment both with full zip opening
- YKK hinges of Japanese production
- Ventilated backrest
- Reinforced handle and stitching
- Possibility of being used with a shoulder strap, a single shoulder, a handle or anchored to a trolley
- Quickly and easily adjustable shoulder strap detachable
- Front compartment with document holder and hooks for hanging keys
- Dimensions main main compartment: 40x25x7.5 cm.
- Front compartment dimensions: 33x20x2 cm.
- Weight: 0.95 kg.

The Nitecore NCP30 tactical sheath is a robust, multifunctional product, ideal for torches and multipurpose.
The scabbard also offers a small side compartment for carrying pens and penlights.
Made of 900D Cordura Mil-Spec Nylon, the ncp30 sheath can be easily mounted on a belt or
other MOLLE systems.

Compatible torch models:
EA21 EC20 EC25 MT25 MT2C MT20C MT06 P20 P20UV P10 P12 SRT5 MH2C MH10 MH12

Measurements:

Item weight: 54.4 g
Product dimensions: 8.4 x 4.3 x 2.5 cm

Diffusore luminoso in materiale plastico robusto, durevole, anti-urto e resistente ad alte e basse temperature da fissare sulla testa delle torce Nitecore con testa di diametro di 4cm.

Questo diffusore trasforma la vostra torcia in una pratica bacchetta di segnalazione; la luce arancione è ottima per segnalare situazioni di emergenza o per un uso professionale di controllo del traffico.

Materiale: plastica PC2805 realizzata da Bayer Material Science AG
Lunghezza: 18cm
Diametro: 3,95cm

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC

4-seater 18650 battery holder made of extremely resistant rubber with optional safety velcro strap.

Allows you to store and keep ordered up to 4 18650 or equivalent cylindrical batteries with a diameter not exceeding 23mm. Thanks to the convenient Velcro strap you can store batteries safely in your pocket, inserting them in a backpack or travel bag or even hanging them on your belt, if necessary.

Dimensions: 4.16x4.29x8.78cm
Weight: 44.5g.

Aggancio universale per torce dotato di supporto magnetico e apertura rapida compatibile con qualsiasi torcia con fusto di diametro da 24 a 27mm. 


Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico.

- Materiali: alluminio aeronautico anodizzato e magneti al neodimio
- Misure: 50mm lunghezza x 65mm altezza
- Diametro utile torcia: da 24mm a 27mm

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

Filtro verde realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

Filtro verde realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 40mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25PRO - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC - TM9KPRO

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 34mm.

Questo filtro trasforma il fascio della vostra torcia in luce rossa ottima da utilizzare contestualmente ai visori notturni ed adatta a non spaventare animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: MT25, MT26, SRT6 & EC25

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 40mm.

Questo filtro trasforma il fascio della vostra torcia in luce rossa ottima da utilizzare contestualmente ai visori notturni ed adatta a non spaventare animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25PRO - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC - TM9KPRO

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GT, MH25GT, P12GT, P10, P30, SRT7, SRT9, MH27, MH27UV

cordura sheath for led flashlights: MH40 - MH40GT - MH40S - P35i

Pocket size: 6 x 3.5 x 10 cm

External measurement: 6.6 x 4 x 15 cm

fodero in cordura per torce a led: TM10K - TM9K - NC10000

Misura tasca: 3,5 x 4 x 8 cm

Misura esterna: 3,5 x 5 x 10,5 cm

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile con modelli di altre marche

Attraverso questo attacco, è possibile fissare una torcia alla slitta di un fucile.
(Picatinny / Weaverrail tactical weapons systems)
- Materiali: alluminio
- Misure: 44mm x 45mm
- Diametro di fissaggio: da 25mm a 27mm