historical and medieval swords

This battle ready sword, faithfully reproduces the sword of Sparta used in the 300 and 300 Rise of an Empire movies.

Blade: 1050 battle ready carbon steel
Handle: Burnished steel and finely stitched leather
Blade length: 65cm.
Total length: 76.50cm.
Blade thickness: 3mm.
Balance: advanced, at 7cm. from the guard branch
Weight: 1250g.
Sheath: in leather

Blade: carbon steel WITH ARROUNDED POINT and 4 MM THREAD suitable for battle ready
Grip: leather
Pommel: Carbon steel
Guard: carbon steel
Scabbard: leather and steel
Blade length: 99cm.
Total length: 127.5cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1840g.
Balance: 11cm.

Marto - Antique effect Celtic Dagger - Dagger historical

A peculiar characteristic of Celtic swords was the handle in the form of "X", otherwise known as anthropomorphic handle. The arms of the X constituted the lower limbs (wrapped around the "strength" of the blade) and higher than a human male whose head stood in the spot usually occupied by the knob. In the oldest specimens (sixth century BC), the anthropomorphic shape was very strong, with the "arms" of the man-handle raised in a praying position, almost forming a trident.

- 440 steel blade is dull
- Total length 44.5 cm
- Total length 30 cm
- Very good quality antiquing with the blade and the handle

Around 1450, the long sword, often called "one-and-a-half", was widely used in war, but it was also often a weapon of self-defense for civilians. Coupled to a dagger it was excellent against thieves, brigands and assassins, often organized into gangs that roamed the countryside.

Equipped with a good tip and adequate length, it allowed opponents to be kept at a distance. Its average weight allowed it to be used easily with one hand, in combination with the dagger in the other. Moreover, thanks to the length of the handle, it could be used with both hands to have greater control and perform very powerful cuts.

Blade: carbon steel - NOT SHARP
Handle: black leather and wire
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 90cm.
Handle Length: 24cm. (including knob)
Total Length: 115cm.
Blade width: 45mm.
Blade thickness: 4mm.
Weight: 1514g.
Weight with Sheath: 1800g.
Balance: advanced to 13cm.

Blade: carbon steel
Handle: wood and leather
Knob: aluminum alloy
Guard: aluminum alloy
Sheath: -
Blade length: 91cm.
Handle Length: 15cm.
Total Length: 114cm.
Blade width: 50mm.
Blade thickness: 3mm.
Weight: 1360g.
Weight with Sheath: -
Balancing: Advanced to 9cm.
Support: Painted wooden wall plate

Replica ufficiale dietro licenza ufficiale Universal Pictures, della spada di Robin Hood diretto da Ridley Scott.

Lama: Acciaio al carbonio 1050 battle ready
Impugnatura: in metallo e legno
Lunghezza Lama: 89cm.
Lunghezza Totale: 101,5cm.
Spessore Lama: 4mm.
Peso: 1890g.
Fodero: non compreso.

This splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so that you can use a second hand in support but can also use the sword in one hand. thanks to its weight and small size.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total length: 105cm.
Blade width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -

Replica della spada n. IV-1787 presente nella Reale Armeria d'Inghilterra.
Ben bilanciata e relativamente leggera, consente un brandeggio abbastanza rapido nonostante l'indubbia imponenza.
Lama: in acciaio al carbonio - non affilata
Lunghezza lama: 111.5cm.
Spessore lama: max 4.6mm.
Lunghezza Totale: 145.5cm.
Peso: 2050g.
Bilanciamento:9 cm dalla guardia

Reproduction, made by Windlass, of the William Wallace's sword, used by Mel Gibson in the BraveHeart movie.

Total length: 154.5 cm
Blade length: 120 cm - NOT WRENCHED
Steel: High carbon content (it is recommended to periodically maintain oil to avoid oxidation)
Blade thickness: 4.4 mm
Weight: 2.98 kg

The handle (25.5 cm) and the first part of the blade are covered in leather.

Faithful reproduction produced by Windlass, of the sword taken from the movie "The Gladiator", epic film of 2000, directed by Ridley Scott and starring Russell Crowe.

Exhibition product

Blade: Carbon steel
Handle: in synthetic material, wood and bronze
Blade length: 75cm.
Total Length: 97cm.
Blade thickness: 3mm.
Balancing: advanced, at 3cm. from the guard branch
Sheath: in wood and leather with brass fittings
Weight: 1450g.

Scudo prodotto dalla Windlass, tratto dal film di 300.

Materiali: lo scudo è fatto in acciaio con rivestimento placcato in rame.
La parte interna è rivestita in gommapiuma e munita di cinghie di cuoio per il trasporto.

Dimensioni: 94 cm
Peso: 9 kg