Neck Knives: your reliable daily companion

DICOK TS evolves the DICOK design with technical updates aimed at professional underwater use. Developed with industry experts, it is designed to ensure reliability and safety in the marine environment.

The blade incorporates a line cutter for quick action even in critical conditions. Nitrogen steel replaces the previous N690Co, offering greater resistance to oxidation and corrosion in saline environments. The new EXP Dark coating further improves protection against corrosive agents while maintaining anti-reflective properties.

The steel structure was chosen to ensure superior hardness, edge retention, and structural strength compared to titanium, essential characteristics for operational use.

Supplied with a Kydex sheath and paracord for belt attachment, MOLLE and webbing systems, and a fiberglass-reinforced nylon handle with a non-slip finish that is ergonomic and safe even when wearing diving gloves.

Intended use: Diving knife

Type of production: Industrial
Country of production: Italy
Blade: Nitrogen steel
Blade finish: EXP Dark coating 
Handle: glass fiber reinforced nylon
Blade length: 81mm. 
Blade thickness: 4mm.
Total length: 196 mm.
Weight: 150 g.
Sheath: Kydex neck sheath, compatible with various attachment systems.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: To maintain performance over time, we recommend rinsing, drying, and lubricating the knife periodically after use in the sea.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Built on a solid foundation, the redesigned Altitude takes ultralight hunting gear to new heights. This minimalist fixed blade features carbon fiber scales for better control of the CPM-S90V blade. This incredible ultralight cutting tool earns its place by your side thanks to its balance of corrosion resistance, strength, and edge retention.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade treatment: Orange Cerakote
Handle: CPM-S90V stainless steel with carbon fiber scales
Blade length: 78mm.
Blade thickness: 2.3mm.
Overall length: 175mm.
Weight: 47g.
Sheath: Boltaron, can be worn around the neck or compatible with M.O.L.L.E. or UltiClip attachments 
Packaging: cardboard box with Benchmade logos
Notes: knife out of production, previously purchased, from a private collection

Designed by Nate Matlack, the Vaquita II is a compact fixed-blade knife that combines functionality and style. With an overall length of 15.8 cm, it is ideal for precision work. The Damascus steel blade, with Kukri profile and flat edge, provides excellent performance, thanks to a hardness of 58-60 HRC.

The green Micarta canvas handle ensures a firm and comfortable grip. Compact, lightweight and durable, the Vaquita II is a reliable companion for daily use.

Intended Use: EDC / Sporting / Neck Knife

Production Type: Industrial
Country of Production: China
Blade: full tang in Damascus Inox steel with 9Cr18MoV base
Blade treatment: -
Handle: Micarta
Blade length: 81.3mm.
Blade thickness: 2.3mm.
Total length: 158.3mm.
Weight: 36.3g.
Sheath: thermoformed kydex, with chain for wearing around the neck
Packaging: cardboard box with Civivi logos
Notes: Design by Nate Matlack

The pursuit of extreme speed is a timeless challenge. In the 1920s, Frank Lockhart, legendary American driver, embodied this dream. The youngest winner of the Indy 500 at just 24 years old, Lockhart chased the all-time land speed record. On April 25, 1928, in his supercharged Stutz Black Hawk, he reached 220 mph before a tire failure ended his race. His indomitable spirit lives on today, inspiring those who dare to push the limits.

SPEED DEMON was born with this same philosophy in mind. Weighing only 70g, this urban knife combines innovative design and skeletonized handle, combining style and functionality. Compact yet powerful, it tackles any challenge with a 4.4 mm thick and 80 mm long blade. Complete with a handmade Kydex sheath, SPEED DEMON is designed for ambitious, adrenaline-thirsty men.

Intended Use: EDC / Sportsman / Neck Knife

Production type: Industrial
Country of manufacture: Lithuania
Blade: full tang in M390 stainless steel
Blade finish: Black DLC
Handle: full tang in M390 stainless steel
Blade length: 80mm.
Blade thickness: 4.2mm.
Total length: 180mm.
Balance: backward
Weight: 70g.
Sheath: thermoformed Kydex, with belt loop
Packaging: box with TRC knives logos, manuals,

Note: no loyalty discounts are active on this product

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / Neck Knife / CQD

Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new

Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Sporty

Type of production: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 48g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Jesper Voxnaes

Intended use: Sporty

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 66g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Jesper Voxnaes

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Intended use: Sports

Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 50g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 67g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper Voxnaes

Use: Neck Knife / Collection

Type of production: handmade
Country of production: Italy
Blade: full tang, D2 steel
Blade Finish: Raw
Handle: Paracord
Blade length: 80mm.
Blade thickness: 5.5mm.
Total length: 180mm.
Weight: 130g.
Sheath: Thermoformed Kydex
Packaging: -
Notes: -

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

Use: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Intended use: EDC / Sportivo / Neck Knife

Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 60 / 61HRC stainless steel
Blade finish: Satin finish
Handle: in Elmax 60 / 61HRC stainless steel
Blade length: 80mm.
Blade thickness: 4.2mm.
Total length: 180mm.
Balancing: set back
Weight: 70g.
Sheath: in thermoformed Kydex with belt loop
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manual

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: China
Handle: Zytel
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 175mm.
Weight: 42g.
Closing: -
Notes: whistle included in the sheath
Sheath: Kraton

Intended use: neck / tactical / sports knife

Type of production: Industrial
Country of production: China
Blade: AUS-6 stainless steel
Blade treatment: Teflon coating
Handle: G10
Blade length: 73mm.
Blade thickness: 2.2mm.
Total length: 139mm.
Weight: 38g.
Sheath: ABS, with stainless steel clip for neck or belt
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Black GunKote
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Occupation: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Lama treatment: Black Blood
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: set back
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for Neck Knife use
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: Neck Knife / Collection

Type of production: Artisan
Blade production: Italy
Blade: integral, D2 steel
Blade Treatment: Bronze GunKote
Manicure: Paracord
Blade Length: 80mm.
Blade thickness: 6.5mm.
Total Length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for use with Neck Knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Purpose of use: Light Utility

Type of production: Industrial
Country of production: China
Blade: Stainless Steel 440C
Blade Treatment: Satin
Handle: Paracord
Blade Length: 75mm.
Blade thickness: 4mm.
Total Length: 170mm.
Weight: 80g.
Sheath: in Kydex, with a Tek-Lok attack
Packing: Cardboard box with BlackFox logos
Notes: Design by Alfredo Doricchi

Cutlery Collini is an authorized dealer of products knives Rick Hinderer

Use: Tactical / Collection

Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Black G10
Blade length: 70mm.
Blade thickness: 3.5 mm.
Overall length: 160 mm.
Weight: 70 gr.
Sheath: Black Kydex - Ball Chain Necklace
Notes: -

Intended Use: Hunting

Type of production: Industrial
Production Country: Japan
Blade: AUS-8A stainless steel
Blade treatment: satin finish
Handle: ABS
Blade length: 82mm.
Blade thickness: 2 mm.
Overall length: 184mm.
Weight: 39g.
Sheath: Secure-Ex in ABS
Packaging: Sealed box with Cold Steel logos
Notes: -

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: Neck / Tactical / Utility

Production Type: Semi-Handmade
Production Country: USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Stonewashed
Handle: -
Blade length: 66mm.
Blade thickness: 4.8mm.
Overall length: 155mm.
Weight: 95g.
Sheath: Kydex with thickness of 1.5mm
Packaging: Cardboard box with logos Freeman Outdoor
Notes: -

Use: Neck / Tactical / Utility

Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: -
Blade length: 66mm.
Blade thickness: 4.8mm.
Overall length: 155mm.
Weight: 95g.
Sheath: Kydex with thickness of 1.5mm
Packaging: Cardboard box with logos Freeman Outdoor
Notes: -

Use: Neck / Tactical / Utility

Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Lama: Patriot Brown Cerakote
Handle: -
Blade length: 66mm.
Blade thickness: 4.8mm.
Overall length: 155mm.
Weight: 95g.
Sheath: Kydex with thickness of 1.5mm
Packaging: Cardboard box with logos Freeman Outdoor
Notes: -

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Wash
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 125mm.
Balancing: set back
Weight: 196g.
Sheath: in Kydex, thermoformed, with Tek-Lok type connection
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Use: Neck Knife / Light Utility

Production Type: Semi-Industrial
Production Lama USA
Blade: Full tang 1095 steel 58 / 60HRC
Treatment Blade: Black Traction Coating
Handle: Black Linen Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 155mm.
Thickness when folded: -
Balancing: -
Weight: 68g.
Closed: -
Clip: -
Sheath: Kydex, neck
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of authenticity and warranty

Blade: 440C Stainless Steel
Handle: Micarta and Paracord
Blade Length: 70mm.
Blade Thickness: 3mm.
Overall Length: 164mm.
Weight: 99g.
Lock: -
Clip: -
Sheath: Kydex with Tek-Lok system
Notes: Design by Steffen Bender

Destinazione d'uso: Neck Knife

Lama: in acciaio al carbonio 1095 58/59 HRC
Manicatura: -
Lunghezza lama: 81mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 172mm.
Bilanciatura: in coincidenza del ramo di guardia inferiore
Peso: 78g. (120g. con fodero)
Fodero: ABS
Note: inclusi 2mt di paracord

Intended Use: Tactical / Neck Knife

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Teflon
Handle: G-10
Blade length: 70mm. Blade thickness: 3.5mm.
Total length: 145mm.
Weight: 66g.
Sheath: kydex
Packaging: Cardboard box with Fox logos
Notes: Design by Alfredo Doricchi

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey