knives new life

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Out of production, available in different finishes and configurations
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Present
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

The Operator 7 model is huge! TOPS Knives has dared to create an imposing knife with a thick blade and solid handle, creating a balanced tool that excels as a true “workhorse.” At the same time, it retains that classic American combat knife aesthetic, looking as spectacular as it performs.

Made from 8 mm thick 1075 steel, the blade is differentially heat treated: the edge is impact resistant, while the spine is incredibly sturdy. The handle combines sand-colored Micarta on the lower part with black G10 on the upper part, offering optimal grip. Once assembled, the handle is over 2.5 cm thick, shaped to fit perfectly in the user's hand, just like an axe or hatchet handle.

Designed to be useful and comfortable, this knife is for those who don't hold back. It is at home with door kickers, survivalists, and weekend enthusiasts alike. The rounded handles and guard ensure comfort of use, while the finger choil allows for great precision in the most delicate cuts. The 16.5 cm of active edge covers most needs, and the weight of the knife helps to do most of the work itself. The included Kydex sheath with dangler attachment makes it easy to carry in any terrain.

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel 58/60HRC
Blade treatment: Black River Wash (Stonewashed)
Handle: G10 Black and Micarta
Blade length: 184 mm.
Blade thickness: 8 mm.
Total length: 318 mm.
Balance: on the guard branch
Weight: 695 g.
Sheath: Kydex
Packaging: -
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased and from a withdrawn private collection
* Condition: Perfect, like new
* Available on the market: Knife from the late 1980s/early 1990s, out of production and difficult to find
* Sharpness: Factory sharp, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Sheath: Present, with some minor signs of wear on the back 
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Created in the early 1980s from the vision of legendary designer Al Mar, the 3004 “De Oppresso Liber” is much more than a knife: it is a symbol of tactical excellence and special forces spirit.

Produced in a very limited series in Seki, Japan, this fixed blade knife was designed to meet the extreme standards of the U.S. Army's SERE (Survival, Evasion, Resistance, and Escape) units.

The engraved motto — “De Oppresso Liber,” “liberate the oppressed” — directly echoes the ethos of the American Green Berets.

Refined, robust, and now highly sought after by collectors, the 3004 represents one of the most iconic chapters in the history of modern military knives.

Intended use: tactical/collection

Country of manufacture: Japan
Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: satin
Handle: brown micarta
Blade length: 155mm. 
Blade thickness: 4mm.
Total length: 267mm.
Balance: on the guard
Weight: 245g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - supplied with original unopened packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used
* Condition: Overall in good condition, with superficial cosmetic marks on the blade due to actual use, which in no way compromise its functionality and use
* Available on the market: On the market
* Sharpening: Resharpened
* Marks on blade: Several superficial cosmetic marks on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Present and in excellent condition
* Manuals, certificates, and warranties: Present
* Checked and certified by our internal laboratory

The M7 is one of lionSTEEL's most impressive outdoor knives: designed for the most demanding challenges, it combines generous dimensions with surprising maneuverability. Designed to meet the need to cut branches and tackle demanding hikes, it concentrates most of its weight on the blade to facilitate effective chopping and batoning operations.

Made with SOLID technology, the Micarta handle is carved from a single block using 4-axis milling, ensuring structural strength and a firm, secure grip in all conditions. The Sleipner steel blade is resistant to the most intense stresses and easy to sharpen.

The M7 comes with a Cordura-coated Kydex sheath, equipped with a belt loop with MOLLE attachment, for stable and versatile carrying.

A true field companion, ready to tackle any outdoor adventure.

Type of production: Industrial
Country of production: Italy
Blade: full tang, Sleipner steel 60/61HRC
Blade finish: Black MilSpec
Handle: SOLID, machined from a single piece of Micarta using 4-axis milling 
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 410g.
Sheath: Kydex and Nylon, modular, multi-position, MOLLE compatible
Packaging: Cardboard box with Lion Steel logos
Notes: knife from a private collection, previously purchased and used

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in good condition, it has some minor signs of oxidation on the guard and pommel that have not been removed so as not to alter the original finish of the knife, and a couple of small cosmetic scratches on the blade. The sheath is present and perfectly usable, but discolored and “worn” in some parts due to the passage of time
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: A couple of small scratches on the left side of the blade and signs of oxidation on the guard and pommel
* Marks on handle: None
* Box: -
* Sheath: Present, complete with diamond sharpener and original bushing, but discolored and worn due to the passage of time
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house lab

The Gerber BMF (Basic Multi-Function) is a fixed blade knife produced by Gerber Legendary Blades between 1986 and the late 1990s. Designed as a sturdy and versatile survival tool, it has become a cult object among collectors and enthusiasts of military and outdoor knives. Its impressive blade, non-slip handle, and sheath with accessories make it one of the most iconic models of Gerber's production from that period.

Intended use: Survival / Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: micro-peened
Country of manufacture: USA
Handle: Hypalon (neoprene-like material)
Blade length: 200mm.
Blade thickness: 6 mm.
Total length: 342 mm.
Balance: on the guard
Weight: 433 g.
Sheath: ABS and Cordura
Notes: knife from a private collection, previously purchased, serial number 006282 - The original compass is in the pocket on the sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued in this configuration.
* Sharpening: Factory sharpened
* Marks on blade: A few small marks given by time.
* Marks on handle: A few small marks given by time.
* Box: Present, very worn and with a few missing manufacturer's stickers.
* Scabbard: Present, in very good condition.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.

The 2007 Chris Reeve Green Beret 7” is an iconic knife designed by William H. Harsey, a legendary knife designer known for his expertise in tactical and military tool design.

William H. Harsey has a long career in the knife world, with a particular focus on creating combat and utilitarian knives prized for their functionality and durability. His experience and background in the armed forces helped shape his approach to design, which is reflected in knives such as the Green Beret 7”. His creations are renowned for the perfect balance of aesthetics, performance and durability. Harsey has collaborated with several top knife manufacturers, and his designs have become icons in the world of tactical equipment.

With its practical and precise approach, Harsey's Green Beret 7” stands out as one of the most sought-after tools for enthusiasts and professionals alike.

Intended Use: Collection/Allround/Fighter

Type of manufacture: handcrafted
Blade: CPM-S30 55/57HRC stainless steel with CeraKote treatment
Country of manufacture: USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade thickness: 5.8mm.
Total length: 315mm.
Balance: on the lower guard branch
Weight: 364g.
Sheath: SpecOps Nylon, made in the USA
Notes: knife made in 2007 with certificates and box, box with several signs of wear and lacking some manufacturer's stickers

Note: This product does NOT participate in the “Loyalty / Loyalty Program” discounts active in our online store

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: NOS Knife - New Old Stock - New from Stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: Minimal, given by time.
* Marks on handle: -
* Box: Present, original, like new
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The “Recon Tanto” is an iconic knife produced by Cold Steel, known for its reliability and sturdiness. First introduced in 1988, the model was designed to be a combat and survival knife with a design that combines functionality and durability.

Over the years, the “Recon Tanto” has been improved and updated, but has retained its distinctive character and functionality. It has become one of Cold Steel's most recognizable models, thanks to its ability to combine traditional design with modern innovation.

Intended use: collection/tactical/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: stainless steel VG-1
Blade treatment: painting
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: knife NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Iconic knife from the early 2000s, used, but overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: Signs of wear typical of this model and material, given by rubbing against the sheath
* Marks on handle: None, normal workmanship marks found on all these models.
* Box: /
* Scabbard: Present, in very good condition, with normal signs of workmanship present on all of these models.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory.

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after heavy use.

The knives have been tested and selected by U.S. Navy SEALs, who have used them in sensitive missions and special operations. Because of their incredible durability, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and high-end outdoor equipment enthusiasts.

Intended Use: Tactical/Sub

Type of Manufacture: industrial
Blade: made of Beta Titanium with a micropeened finish
Country of manufacture USA
Handle: Hytrel
Blade length: 185mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 264g.
Sheath: made of Hytrel and rubber, with Nylon strap
Packaging: /
Notes: previously purchased knife, from private collection - discontinued, iconic early 2000s product

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.



The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



Intended Use: Sporting/Collection

Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydex

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory


Intended Use: tactical / collection

Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm. 
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened box

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some small marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Accredited Member C.IC. (Italian Guild of Cutlery Makers) Livio Montagna. Reproduction inspired by one of the most iconic knives of all time (the Bowie), but with a more "tactical" touch for the blade; the deer handle and leather rings are left to recall the classicism of the model.

Intended use: hunting / collection

Type of production: artisan
Country of production: Italy
Blade: hardened 440C steel at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Leather Rings - brass guard
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 340mm.
Weight: 390g. (519g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory



Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.

Intended Use: Collection / All Round Utility / Tactical

Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued item

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Excellent reproduction of one of the most iconic knives ever: the classic Bowie. A knife created by Rezin Bowie in the early 19th century for his brother Jim Bowie, the famous American pioneer whose rather reckless life is now shrouded in legend.

Livio Montagna's excellent craftsmanship does justice to this piece of history with its classic and timeless stylistic features: the double guard, the clip point blade, the handle in natural material.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: steel 440C tempered at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Buffalo - brass guard and pommel
Blade length: 197mm.
Blade thickness: 5.7mm.
Total length: 314mm.
Weight: 497g. (666g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Intended use: Collection / Survival

Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent condition

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.

Intended use: Collection/Survival

Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good condition

Knife from private collection - Very rare knife from 2015, discontinued for several years, in min conditions - Comes with original packaging (box, protective plastics, manuals) and accessories (sheath and straps) - Never used, with original factory sharpening - Checked and certified by our in-house laboratory.

Multi-role non-magnetic knife, developed and officially acquired by the landing troops of the Italian Army. Totally titanium blade and tang make the knife particularly resistant to oxidation and usable for magnetic trigger buried ordnance search (mine probing).

Intended Use: Tactical / Military / Sub / Amphibious

Production type: Industrial
Country of Production: Italy
Blade: Titanium Beta 40HRC
Blade Finish: Burnishing
Handle: Forprene
Blade Length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Weight: 195g.
Sheath: Desert nylon, with ABS hard shell; M.O.L.L.E. type thigh straps and attachments.
Packaging: Cardboard box, certificates, manuals
Notes: Widia glass breaker on rear tang.

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.

Intended use: collection / tactical / sporting

Production type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new

Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and cordura

The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.

The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.

Destination of use: Sportivo / Collezione

Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: Used, with obvious cosmetic signs of wear and tear, in no way compromising its use
* Commercially available: Discontinued, demilitarized version, without attachments and with top sharpening removed
* Sharpening: Factory (can be improved)
* Marks on blade: Various signs of wear, cosmetic in nature.
* Marks on handle: Various signs of wear, cosmetic in nature.
* Box: Present, original, complete
* Scabbard: Present, original, used, in good condition.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended use: tactical/military/multi-role

Blade: full tang in N690Co 58HRC stainless steel with front upper portion of blade NOT sharpened
Handle: detachable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balance: advanced, 1.5cm from the lower guard branch
Weight: 378g.
Sheath: modular tactical with thread cutter, thigh or belt, Nylon - includes diamond sharpener and magnesium fire starter

Sheath: modular tactical with thread cutter, thigh or belt, Nylon - includes a diamond sharpener and magnesium fire starter

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty