RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Overall in excellent condition, has light surface scratches on the steel handle
* Available on the market: Seventh generation of the model, produced only between 1999 and 2001, currently out of catalogue and out of production
* Sharpening: Factory
* Signs on blade: None
* Handle marks: light surface scratches
* Box: Present, complete and in excellent condition
* Sheath: -
* Manuals, Certificates and Guarantees: Present
* Controlled and Certified by our in-house laboratory

Originally launched in 1987, the Co-Pilot was sold as a small travel knife with a two-inch blade, designed to be carried on airplanes so you never give up a handy pocket or money clip once you arrive at your destination. Times have changed, but the design continues to prove its full validity.

Intended use: Sporty/Collection

Type of production: Industrial
Country of production: Japan
Blade: In stainless steel ATS-55
Blade finish: satin
Handling: stainless steel
Blade length: 51mm.
Blade thickness: 2.5mm.
Closed length: 76mm.
Total length: 127mm.
Weight: 74g.
Locking system: Back Lock
Clip: removable, stainless steel
Packaging: carton box, manuals and warranty
Note: Previously purchased knife, from a private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Perfect, Like new, NOS (new old stock)
* Available on the market: 2006 model, out of production
* Sharpness: Factory sharp, never used
* Marks on blade: None
* Marks on handle: None
* Box: Present and in perfect condition
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The C70 A.T.R. (At The Ready) embodies the essence of a high-performance tactical folder. Awarded “Knife of the Year 2003” by Knives Illustrated, this model showcases the most advanced technological solutions developed by Spyderco.

The handle, precision-machined from a block of satin-finished stainless steel, is lightened by a series of holes that reduce weight and serve as tactile reference points for quick grip changes. The same holes are replicated on the contoured clip, ensuring balance and consistency in indexing.

The ends of the handle widen into a generous finger choil and a pinky rest, ensuring a stable grip in all conditions. The Compression Lock, fully integrated into the titanium scale, offers maximum strength and is rated for heavy-duty use and MBC applications.

The VG-10 blade, hollow-ground sharp, features a non-sharp swedge and a profile that combines a solid point with excellent penetration and cutting ability. Above the classic Spyderco hole is the Cobra Hood, which naturally guides the thumb during quick opening and acts as a control platform when the knife is in use.

The clip is configurable for both right and left tip-up carry thanks to the pre-drilled holes.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade finish: satin
Handle: satin stainless steel
Blade length: 87mm.
Blade thickness: 3 mm.
Closed length: 129 mm.
Total length: 216 mm.
Weight: 150g.
Closure: Compression Lock
Clip: polished stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife from a private collection - NOS (new old stock) in perfect condition, absolutely like new, without even a scratch or sign of use

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

Designed by renowned self-defense expert Michael Janich, the Yojimbo™ 2 played a key role in popularizing the tactical Wharncliffe concept. In this elite version, the design is further enhanced by the use of CPM® SPY27®, Spyderco's exclusive steel developed with Crucible® powder metallurgy technology.

Its advanced formula combines elements such as vanadium, molybdenum, niobium, and nitrogen, enhanced by the presence of cobalt and the CPM process, to offer an extraordinary balance between edge retention, corrosion resistance, and toughness. These qualities maximize the sharp profile of the hollow-ground Wharncliffe blade, ensuring superior cutting performance.

The handle features skeletonized stainless steel liners embedded between textured peel-ply G-10 scales, which form the basis of the sturdy Compression Lock® and serve as an anchor for the four-position reversible clip (tip-up/tip-down, right/left side).

As with the other models in the prestigious CPM SPY27 line, this Yojimbo 2 also features the characteristic cobalt blue scales, a hallmark of the collection.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-SPY27 stainless steel
Blade finish: Satin
Handle: G10 with stainless steel liners
Blade length: 3.15 inches (81 mm).
Blade thickness: 0.147 inches (3.7 mm).
Closed length: 4.5 inches (114 mm).
Overall length: 7.7 inches (195 mm).
Closed thickness: 11 mm.
Weight: 115 g.
Lock: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In excellent condition, a couple of visible scratches on the blade caused by rotation when opening and closing the handle and two very small dents in the steel head of the handle
* Available on the market: Out of production and difficult to find, only marketed from 2003 to 2005
* Sharpness: Factory sharp
* Marks on blade: a couple of visible scratches on the blade caused by rotation when opening and closing the handle
* Marks on handle: two tiny dents in the steel head of the handle
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and certified by our in-house laboratory

Ed Schempp, a wheat farmer, metallurgist, and renowned knife maker, created the Persian Folder by blending classic Western elegance with exotic Eastern charm. Traditionally, Persian knives are fixed, but Ed reinterpreted this typical shape in a folding knife.

Characterized by curved and harmonious lines, the Persian Folder 90 mm stands out for its black Micarta scales combined with polished stainless steel guards. The handle features a series of finger choils that allow for a firm grip and total control of the blade. The blade, inspired by the East, has a pronounced belly and an elegant upward-pointing tip.

Made of high-performance VG-10 steel with a concave grind, the blade measures 89 mm and features a prominent “hump” above the opening hole, ideal as a thumb rest. The clip allows for right-side tip-up pocket carry. A milling on the locking mechanism, known as the David Boye Dent, increases safety by preventing accidental unlocking during a firm grip.

Intended use: Fighter / EDC

Type of production: industrial
Blade: VG10 stainless steel
Blade finish: Satin
Country of manufacture: Japan
Handle: Micarta and stainless steel
Blade length: 89 mm.
Blade thickness: 3 mm.
Closed length: 121 mm.
Total length: 210 mm.
Weight: 154 g.
Locking system: Back lock
Clip: removable, stainless steel with black coating
Packaging: Cardboard box with Spyderco logos
Notes: knife from a private collection, previously purchased

• Origin: Acquired from a private owner, previously purchased
• Condition: Overall in excellent condition
• Available on the market: NO
• Sharpening: Factory edge
• Blade marks: None
• Handle marks: None
• Box: Not included
• Sheath: /
• Manuals, Certificates, and Warranties: /
• Checked and Certified: By our in-house laboratory

The Spyderco Meerkat C64JPBG is a compact and versatile folding knife, ideal for those seeking a reliable and discreet tool for everyday use. This model, part of a limited production run (Sprint Run) from 2009-2010, stands out for its exclusive Phantom Lock™ mechanism and VG-10 steel blade, renowned for its excellent balance of edge retention and corrosion resistance. The blue/gray FRN (fiberglass reinforced nylon) handle ensures a secure and comfortable grip, while the ambidextrous clip allows for discreet and practical carrying. With a total length of 151 mm and a weight of just 70 g, the Meerkat combines portability and functionality, making it a valuable addition for collectors and knife enthusiasts.

• Intended Use: Everyday use, collection
• Production Type: Industrial (Sprint Run)
• Country of Manufacture: Japan
• Blade: VG-10 stainless steel
• Blade Finish: Satin
• Handle: Blue/gray FRN
• Blade Length: 51 mm
• Blade Thickness: 2.5 mm
• Closed Length: 100 mm
• Total Length: 151 mm
• Closed Thickness: 12 mm
• Weight: 70 g
• Lock: Phantom Lock™
• Clip: Ambidextrous, tip-down, stainless steel
• Packaging: Original Spyderco box
• Notes: Limited Sprint Run edition from 2009-2010, featuring the exclusive Phantom Lock™ mechanism.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: 2007 model, like new, mechanically perfect, no signs of use or wear
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house lab

The T01 SpydeRench marks the return of a revolutionary classic in the world of multi-tools. Designed by an aerospace engineer in collaboration with Spyderco's R&D department, this compact tool combines precision engineering and advanced functionality.

Made from corrosion-resistant 17-4ph stainless steel, it features a genuine Spyderco AUS-8 blade that opens and closes with one hand, a pocket clip, an adjustable roll pin wrench up to 9/16", and a two-position plier with superior comfort.

Complete with interchangeable bits and a multifunction diamond file, the T01 SpydeRench offers exceptional versatility: it can extend, lock in various configurations, and even separate into two independent tools. A unique multi-tool, designed for those who demand the best in every situation.

Intended use: Sports / Multipurpose

Type of production: industrial

Country of manufacture: Taiwan
Blade: AUS-8 stainless steel at 58HRC
Blade finish: satin
Handle and accessories: 17-4ph stainless steel
Blade length: 56mm.
Blade thickness: 2.5mm.
Closed length: 111mm.
Total length: 170mm.
Weight: 68g.
Closure: Back Lock
Clip: stainless steel
Notes: previously purchased product from a private collection - unique hybrid product combining multi-purpose pliers, screwdrivers, and knife

Destination of use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearings

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Satin finish
Handle: Titanium
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 122g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon fiber and laminate titanium liners with G10 and G10 in orange spacer
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 188mm.
Thick when closed: 13mm.
Weight: 116g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Peter Carey - opening via Carson Flipper system on ball bearings

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 79mm.
Blade thickness: 4mm.
Closed Length: 114mm.
Overall length: 192mm.
Thick when closed: 11mm.
Weight: 113g.
Closure: Front Lock
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with stainless steel liners drowned
Blade length: 77mm.
Blade thickness: 3mm.
Closed Length: 101mm.
Overall length: 178mm.
Thick when closed: 13mm.
Weight: 74g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Brad Southard - Opening on ball bearings - opening via Carson Flipper system

Intended use: Sport / Collection

Type of production: Industrial
Production blade: Use
Blade: Stainless steel CPM-S30V Steel Powder
Blade treatment: Black TiNi
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Length closed: 121mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 108g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: discontinued product and hard to find, very rare that you can find the version with black blade plain edge

Intended use: Sport / Collection

Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade treatment: beaded blast
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 119mm.
Overall length: 197mm.
Weight: 133g.
Locking system: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Serge Panchenko

Intended Use: Sport / EDC

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CTS-XHP
Treatment Blade: -
Handle: Carbon Fiber Laminate + G10 and Titanium
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 116mm.
Overall length: 195mm.
Thickness when folded: -
Balancing: -
Weight: 119g.
Lock: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Eric Glesser - Opening patented by Carson Flipper - Pivot on ball bearings - Pivot sur roulements à billes

Spyderco - Manix 2 G10 - C101GPS2 knife

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Lama: -
Handle: G-10 with stainless steel liners
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 152g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Spyderco - Translucent Blue Manix 2 - C101PBL2 knife

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS BD-1
Treatment Lama: -
Handle: Edgetek FRCP polymer reinforced with glass fiber
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 82g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: sports / tactical

Type of production: industrial
Production Blade: Japan
Blade: Stainless steel with rolled edge in ZDP-189 to 67HRC and cheeks external 420J2
Treatment Lama: -
Handle: Carbon Fiber
Blade length: 86mm.
Blade Thickness: 3mm.
Closed Length: 108mm.
Total length: 194mm.
Balance: -
Weight: 88g.
Closure: Back Lock
Clips: stainless steel, removable and reversible
Sheath: -
Notes: -

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Lama: -
Handle: FRN
Blade length: 51mm.
Blade thickness: 3mm.
Closed length is 79mm.
Total length: 128mm.
Thick when closed: -
Balance: -
Weight: 46g.
Closing: -
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: Lock-free blade

Spyderco - Cricket Steel - C29P - knife

Intended use: Sport

Blade: stainless steel VG-10
Handle: Stainless Steel
Blade length: 48mm.
Blade Thickness: 2mm.
Closed Length: 68mm.
Total length: 117mm.
Balance: -
Weight: 48g.
Closure: Frame Lock
Clip: Stainless steel
Sheath: -
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Lama: -
Handle: G-10 with stainless steel liners
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 152g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Spyderco - Jens Anso Zulu - C145GP knife

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G-10
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: 14mm.
Balance: -
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Jens Anso

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: Tiger Stripe
Handle: Fiberglass
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 283mm.
Thick when closed: -
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: Design by Bob Lum

Spyderco - Caly 3.5 - C144GP knife

Intended Use: sports / tactical

Type of production: industrial
Production Blade: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10
Blade length: 87mm.
Blade Thickness: 3mm.
Length closed: 109
Total length: 193mm.
Balance: -
Weight: 90g.
Closure: Lock back
Clips: stainless steel, removable and reversible
Sheath: -
Notes: third version of the famous calypso folder

Spyderco - Junior by DiAlex - C150G knife

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 103mm.
Total length: 184mm.
Thick when closed: 10mm.
Balance: -
Weight: 82g.
Closure: Compression Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by DiAlex