pocket knives

Intended use: EDC / sports

Type of production: Industrial
Country of production: Italy
Blade: Niolox stainless steel 59/61HRC
Blade finish: Stonewashed
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 190mm.
Weight: 60g.
Closing mechanism: Back Lock
Clip: removable and reversible, stainless steel, flush
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: 2012 model withdrawn from a private collection, previously purchased and used, probably carried a lot in a pocket or backpack
* Condition: Mechanically perfect, blade without marks - little use - titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Available on the market: Out of production
* Sharpness: Factory sharp, good, could be improved
* Marks on blade: None
* Marks on handle: Titanium handles heavily abraded/worn from friction, probably carried often in a jeans or trouser pocket, which over time has abraded the finish and micro-shot peening of the titanium
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates - knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and lightly used
* Condition: Overall in excellent condition, slight discoloration on the anodized opening pin
* Available on the market: Out of production
* Sharpness: Resharpened, sharpness could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Present and original, but generic: no model references
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: MidTech
Country of production: USA
Blade: CPM-S30VN stainless steel 58/59HRC
Handle: Hammered titanium - a texture obtained by hand hammering that creates small irregular marks on the surface of the handle. The result is a three-dimensional appearance, with variable reflections in the light, greater grip, and a unique handcrafted character for each piece.
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 10mm.
Weight: 81g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos, no references

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Knife previously purchased from a private collection
* Condition: Overall in excellent condition, with minor abrasions on the titanium due to age
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Minor abrasions on the titanium due to age
* Box: Present and complete
* Sheath: Leather pouch with Chris Reeve logos
* Manuals, Certificates, and Warranties: Present and complete
* Checked and certified by our in-house laboratory

Intended use: collection/sport

Type of production: MidTech
Country of production: USA
Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Carbon fiber and micro-shot peened 6AL4V titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 10mm.
Weight: 105g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, some cosmetic marks on the titanium handle and clip
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Some cosmetic marks on the titanium handle and clip
* Box: Present and complete
* Sheath: -
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Sports/collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Lock: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture August 2023

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Available on the market: Very difficult to find and only available on “drop” from the manufacturer
* Sharpness: Factory sharp
* Marks on blade: A few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Marks on handle: A few imperceptible aesthetic marks on the spacer and titanium clip
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Shop Built by Ansø of Denmark

The “Shop Built” line by Ansø of Denmark was created to offer Jens Ansø's original designs in a more accessible and reproducible form than his custom knives, which are traditionally produced in extremely limited quantities. All “Shop Built” models are designed by Jens Ansø in Denmark and made by his team of skilled craftsmen, who take care of every stage of production with great attention to detail.

This product range maintains the same design philosophy, build quality, and craftsmanship that have made Ansø's work famous, but with a more structured and sustainable production process, designed to satisfy a wider audience without compromising on high-quality materials and finishes.

The AROS model

The AROS is a compact and versatile folding knife, designed as a utility tool for everyday use (EDC). Designed by Jens Ansø, it stands out for its unique design and precision engineering, designed to offer superior performance in everyday activities: from opening packages to more controlled cutting and carving.

The AROS features an innovative integral monoblock frame on each side, incorporating pivot screws, button lock, clip, and lanyard hole in a single precision-machined piece. The two parts of the handle are securely joined with titanium screws on the back, ensuring strength and a clean line.

The 2.5-inch (64 mm) blade now features a hollow grind, a new feature that further improves cutting capabilities while maintaining a slim and elegant profile. The flipper tab is designed to ensure quick opening and, once open, also functions as finger protection. The careful shaping of the blade tang contributes to a comfortable and secure grip, confirming Ansø's focus on functionality and user experience.

Intended use: EDC / Sports

Production type: Midtech
Country of production: Denmark
Blade: RWL34 stainless steel
Blade finish: stonewashed
Handle: 6Al4V titanium and micarta
Blade length: 62mm.
Blade thickness: 3mm.
Closed length: 91mm.
Total length: 153mm.
Weight: 57g.
Closure: Button Lock
Clip: solid titanium, removable
Packaging: cardboard box with Anso of Denmark logos, warranty certificates
Notes: previously purchased knife from a private collection, date of manufacture May 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the titanium handle and clip
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: a few imperceptible marks on the titanium handle and clip
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-S45VN stainless steel at 60/62HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture January 2023

The Mcusta MC-0082 “Kikyo” from the Kamon series is a refined pocket knife that blends Japanese elegance with everyday practicality.

Made entirely of stainless steel, it features an AUS-8 steel blade, known for its strength and ability to maintain a long-lasting sharpness. Its compact design and light weight make it ideal for carrying in your pocket or attaching to a tie with the integrated clip.

The Kikyo motif represents the bellflower, known in Japan as Kikyo or “bellflower.” This flower is a symbol of sincerity, eternal love, and protection. Used in the Sengoku period by the Akechi clan, it is now often used in Japanese decorative arts as an ornamental motif to evoke purity and harmony. On the knives of the Kamon series, the Kikyo motif adds a touch of delicacy and deep meaning, evoking values of loyalty and timeless beauty.

Intended use: EDC / Money clip

Type of production: industrial cutting, assembly, and handcrafted finishing
Country of production: Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: stainless steel
Blade length: 47mm.
Blade thickness: 2mm.
Closed length: 76mm.
Total length: 120mm.
Weight: 56g.
Closure: Frame Lock
Clip: money clip
Sheath: -
Notes: AOI heraldic symbol of the Tokugawa family

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Available on the market: Very difficult to find and only available on “drop” from the manufacturer
* Sharpness: Factory sharp
* Marks on blade: A few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Marks on handle: A few imperceptible aesthetic marks on the spacer and titanium clip
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Shop Built by Ansø of Denmark

The “Shop Built” line by Ansø of Denmark was created to offer Jens Ansø's original designs in a more accessible and reproducible form than his custom knives, which are traditionally produced in extremely limited quantities. All “Shop Built” models are designed by Jens Ansø in Denmark and made by his team of skilled craftsmen, who take care of every stage of production with great attention to detail.

This product range maintains the same design philosophy, build quality, and craftsmanship that have made Ansø's work famous, but with a more structured and sustainable production process, designed to satisfy a wider audience without compromising on high-quality materials and finishes.

The AROS model

The AROS is a compact and versatile folding knife, designed as a utility tool for everyday use (EDC). Designed by Jens Ansø, it stands out for its unique design and precision engineering, designed to offer superior performance in everyday activities: from opening packages to more controlled cutting and carving.

The AROS features an innovative integral monoblock frame on each side, incorporating pivot screws, button lock, clip, and lanyard hole in a single precision-machined piece. The two parts of the handle are securely joined with titanium screws on the back, ensuring strength and a clean line.

The 2.5-inch (64 mm) blade now features a hollow grind, a new feature that further improves cutting capabilities while maintaining a slim and elegant profile. The flipper tab is designed to ensure quick opening and, once open, also functions as finger protection. The careful shaping of the blade tang contributes to a comfortable and secure grip, confirming Ansø's focus on functionality and user experience.

Intended use: EDC / Sports

Production type: Midtech
Country of production: Denmark
Blade: RWL34 stainless steel
Blade finish: stonewashed
Handle: 6Al4V titanium and carbon fiber
Blade length: 62mm.
Blade thickness: 3mm.
Closed length: 91mm.
Total length: 153mm.
Weight: 57g.
Closure: Button Lock
Clip: solid titanium, removable
Packaging: cardboard box with Anso of Denmark logos, warranty certificates
Notes: previously purchased knife from a private collection, date of manufacture May 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the titanium handle, rear paracord lanyard missing
* Available on the market: Unique item, with randomly and procedurally generated designs and anodizations
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: A few imperceptible marks on the titanium handle, rear paracord lanyard missing
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Dual Tone: Satin & Stonewashed
Handle: 6Al4V titanium with “unique graphic” engravings and anodizations
Blade length: 76mm.
Blade thickness: 2.85mm.
Closed length: 101mm.
Total length: 177mm.
Weight: 85g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture March 2023

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible marks on the titanium handle, rear paracord lanyard missing
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: A few imperceptible marks on the titanium handle, rear paracord lanyard missing
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-S45VN stainless steel at 60/62HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture August 25, 2022

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, to be evaluated for potential resharpening.
* Commercially available: Discontinued
* Sharpening: Factory, still in good condition, but with small oxidation spots on the tip (can be easily removed by resharpening the knife, but we intentionally left the factory sharpening excellent)
* Marks on blade: A few imperceptible signs of use on the blade.
* Marks on handle: None
* Box: Present
* Scabbard: Microfiber bag.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC/Gentleman

Production Type: Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S30V 58/60HRC
Blade treatment: satin finish and stone washed
Handle: micarta
Blade length: 73mm.
Blade thickness: 2.3mm.
Length closed: 98mm.
Total length: 170mm.
Thickness when closed: 10mm
Weight: 66g.
Closure: SlipJoint (without blade lock)
Packaging: cardboard box with Benchmade logos
Notes: previously purchased knife, withdrawn from a private collection

The Laguiole Hunting Knife embodies the pinnacle of traditional French craftsmanship, designed for those seeking a rare combination of beauty and functionality. Featuring a handcrafted Damascus steel blade, this hunting knife stands out for the elegant wavy pattern on the blade, the result of a refined and complex technique.

The handle, made from genuine natural horn tip, gives each piece its own uniqueness, while the spine is adorned with fine hand-engraved guilloché – a signature of artisanal mastery. Solid, sharp, and extraordinarily elegant, it’s a collector’s item for true Laguiole enthusiasts.

Intended use: Collection / Hunting
Production type: Handmade
Country of origin: France
Blade: Welded Damascus steel
Blade finish: Visible Damascus, polished
Handle: Natural horn tip
Blade length: 120mm
Blade thickness: 3.5mm
Closed length: 140mm
Total length: 260mm
Closed thickness: 13mm
Weight: 190g
Locking mechanism: Slipjoint
Clip: None
Packaging: Leather sheath and gift box
Notes: Guilloché engraving entirely handmade, natural material handle – each piece is unique

Intended use: Sport/Collection
Production type: Industrial cutting - artisanal assembly and finishing
Country of manufacture: Japan
Blade: SanMai steel with VG-10 stainless core (59/60HRC) and 33-layer nickel Damascus outer cheeks
Blade finish: Damascus
Handle: Pakkawood
Blade length: 70mm
Blade thickness: 3mm
Closed length: 95mm
Total length: 167mm
Weight: 66g
Locking mechanism: Liner Lock
Packaging: Fabric bag
Notes: -

Intended use: Collection and EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: USA
Blade: Tru-Sharp™ stainless steel
Blade finish: Mirror polished
Handle: Amber Bone Peach Seed Jig
Blade length: 69mm
Blade thickness: 2.3mm
Closed length: 107mm
Total length: 176mm
Closed thickness: 10mm
Weight: 56g
Locking mechanism: Back Lock
Clip: None
Packaging: Cardboard box with Case logos
Notes: Iconic Case model, available in limited quantities

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: 2001 knife, discontinued, featuring asymmetrical/chisel sharpening
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small marks from time.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Military

Type of production: industrial
Blade: 154CM stainless steel with asymmetric/chisel sharpening
Blade finish: Stone Washed
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 72mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 180mm.
Weight: 92g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: knife from 2001 discontinued, previously purchased, from a private collection

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Availability: Discontinued
• Sharpening: Original sharpening
• Blade marks: /
• Handle marks: Minor marks
• Box: /
• Sheath: /
• Manuals, Certificates, and Warranties: /
• Inspected and Certified: By our internal laboratory

The Extrema Ratio M.P.C. (Multi Purpose Compact) is an Italian-made folding knife designed to offer the durability of a fixed-blade knife in a compact and versatile format. Made with high-quality materials and precision techniques, it is ideal for tactical uses and field operations.

• Intended use: Tactical / Multi-role
• Production type: Industrial
• Country of origin: Italy
• Blade: Böhler N690 steel (58HRC)
• Blade finish: Testudo (brunished)
• Handle: Black anodized Anticorodal aluminum alloy
• Blade length: 113 mm
• Blade thickness: 6 mm
• Closed length: 149 mm
• Total length: 260 mm
• Closed thickness: 20 mm
• Weight: 240 g
• Locking system: Back lock with additional safety system
• Clip: Removable and reversible, brunished stainless steel
• Packaging: -
• Notes: The blade features partial serration for efficient cutting of cables and high-resistance fabrics.

The M.P.C. was developed to replace or complement a fixed-blade knife, combining the portability of a folder with the strength required for heavy-duty tasks. Its thick blade and robust locking system make it one of the most reliable tools in its category.

The Extrema Ratio X-ANT represents the pinnacle of the “Every Day Carry” Ant series, designed for those who seek quality and innovation in an exclusive folding knife. Featuring a sintered tungsten carbide blade with 71 HRC hardness, this knife offers exceptional cutting ability, outstanding wear and corrosion resistance, standing out for its high-quality materials and meticulous design. Each X-ANT is an engineering marvel, crafted for daily use (EDC) and collection purposes.

The functional design of the X-ANT is enhanced by a blue anodized titanium handle and a Liner-Lock mechanism, making it secure and easy to open thanks to ball bearings. The limited production of 100 numbered pieces makes this knife a collectible item. The packaging includes a polypropylene case with a pressurization valve, resistant to weather, dust, and impact.

Intended Use: Daily use (EDC), collecting
Production Type: Semi-artisanal, limited series
Country of Manufacture: Italy
Weight: 55 g (1.9 oz)
Blade Length: 50 mm (1.96 in)
Total Length: 127 mm (5 in)
Blade Thickness: 1.6 mm (0.06 in)
Blade Material: Sintered tungsten carbide (71 HRC)
Blade Finish: Sandblast
Blade Grind: Flat edge
Handle Material: Blue anodized titanium
Locking Mechanism: Frame Lock
Clip: yes
Packaging: Polypropylene case with pressurization valve
Notes: Limited edition of 100 numbered pieces

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: Present, leather.
* Manuals, Certificates and Warranties: Present, complete kit
* Checked and Certified by our in-house laboratory

The Sebenza 25 is one of the most iconic and respected folding knives in the modern cutlery world, created by Chris Reeve, an artisan of South African descent who later moved to the United States. The term “Sebenza” comes from the Zulu word for “work,” a name that reflects the practicality and functionality of this tool.

Intended use: collectible/sporting

Type of production: midtech
Country of manufacture: USA
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 134g.
Closure: Reeve Integral Lock (Frame Lock)
Clip: removable, titanium
Package: white cardboard box with Chris Reeve logos, leather cover, microfiber cloth, warranty certificates 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present, complete kit
* Scabbard: -
* Manuals, Certificates and Warranties: Present, complete kit
* Checked and Certified by our in-house laboratory

The Sebenza 21 is one of the most iconic and respected folding knives in the modern cutlery world, created by Chris Reeve, an artisan of South African descent who later moved to the United States. The term “Sebenza” comes from the Zulu word for “work,” a name that reflects the practicality and functionality of this tool.

Intended use: collectible/sporting

Type of production: midtech
Country of manufacture: USA
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 134g.
Closure: Reeve Integral Lock (Frame Lock)
Clip: removable, titanium
Package: white cardboard box with Chris Reeve logos, microfiber cloth, warranty certificates

With over 10 years' experience in the design industry, Benjamin Auzier has conceived and produced a wide range of objects, furniture, lighting and tableware for prestigious international brands. 
Driven by a natural curiosity, he does not limit himself to drawing his creations on paper: he personally models them, delving into every aspect of the production process to ensure solutions that meet technical and functional requirements.
Deeply attached to French craftsmanship and its finest products, Benjamin proudly presents his new creations, sharing his passion for the excellence of ‘Made in France’. Each of his designs embodies a perfect balance between aesthetics and practicality, celebrating French know-how and respect for tradition.

The ‘Matorral’ mushroom knife has a high-quality, unhardened 2.5 mm stainless steel blade. Ideal for picking morels, porcini, chanterelles, trumpets, meadow rosé, coulemelle, etc.

Olive wood handle.

The mushroom knife ‘made in France

Dimensions 12.5 cm closed and 18 cm open

Material: olive wood.

Wooden case and box.

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant is available in 4 versions with two different types of steel, both provided by Böhler, an Austrian company with which Extrema Ratio has been collaborating for over 20 years, using its highly esteemed materials for the production of its blades.

For the Stone Washed M390 version, Extrema Ratio uses Böhler M390 steel, thermally treated to 61 HRC, which, thanks to a powder metallurgy production process, ensures cutting effectiveness, wear resistance, and oxidation resistance over time.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel M390 61HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 50mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Notes:

Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.

WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collection

Type of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

Christmas is the time of year when traditions and special moments are celebrated with enthusiasm. One of these traditions is the advent calendar, and Boker has decided to revisit it in a unique way.

The complete kit for a high-quality pocket knife

Inside, you will find everything you need to assemble a high-quality pocket knife, ready to be assembled. Every day a piece of the knife, which will allow you, in the end, to build your custom knife. The kit includes elements such as the blade, various handles for customizing the handle, precision screws, useful accessories, and some surprises that will make every day a unique emotion.

Intended use: EDC/Gentleman

Type of production: Industrial
Country of production: East
Blade: in D2 steel
Blade treatment: satin
Handle: micarta and carbon fiber
Blade length: 80mm.
Blade thickness: 3.0mm.
Total length: 185mm.
Weight: 71g.
Closure: back lock
Packaging: Cardboard box with Boker logos
Notes: Design by Raphaël Durand

Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: Collection

Production Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificates

For this year's Damast Annual Knife we collaborate for the first time with Ricardo Romano Bernandes. Romano, whose family originates from Sicily, was born in Brazil, has been a knife maker since 1990 and his craft is part of a tradition of knife making and sharpening established over several generations. His design is based on traditional Pen Knives and immediately inspired us with its casual freshness.

For the modern interpretation of a traditional knife shape, the powder metallurgical damask of the Swedish company Damasteel seemed to us the appropriate material for the blade. Damasteel's production requires - even if the most modern technical means are used - just as much skill and experience as the hand-forging of steel. The purity and properties of Damasteel steel can be optimised to the extreme with complex combination processes.

The self-supporting structure in blue and grey rolled G10 contrasts beautifully with Damasteel's 'Odin Eye' motif. The simple but always functional slip joint is an obligatory part of this knife. The size, weight, indestructible G10 sheaths and stainless Damasteel make this collector's knife an excellent EDC. Limited to 999 examples worldwide.

Intended use: EDC / Gentleman / Collection

Type of manufacture: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless Damascus "Odin Eye" by Damasteel
Handle: G10 
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 164mm.
Weight: 51g.
Closure: SlipJoint (without blade lock)
Clip: Absent
Packaging: Display case with Boker logos, fabric knife case, warranty certificate
Notes: Limited edition produced in only 999 pieces worldwide, numbered on the box and on the back of the knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production, numbered and limited edition
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Small rubbing marks on the Alpacca heads
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory


Intended use: EDC/Gentleman

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 420
Blade treatment: Mirror polished
Handle: Coloured bone
Blade length: 83mm.
Blade thickness: 2mm.
Total length: 186mm.
Weight: 72g.
Closure: SlipJoint (without blade lock)
Packaging: Cardboard box with Boker Wildlife Series 1992 logos, paper certificate and warranty
Notes: Numbered and limited edition, like new, taken from a private collection

Intended Use: EDC/Gentleman

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Carbon steel O1
Blade treatment: Meteoric Black Stonewashed
Handle: Stained maple burl
Blade length: 80mm.
Blade thickness: 2.1mm.
Total length: 190mm.
Weight: 69g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Boker logos, zippered knife case
Notes: -

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Intended use: Sport / Collection
Type of production: Industrial cut, assembly and handmade finishes
Blade: SPG2 steel, 61–62 HRC
Blade origin: Japan
Handle: Damascus steel and Pakka wood
Blade length: 70 mm
Blade thickness: 3 mm
Closed length: 96 mm
Overall length: 166 mm
Weight: 96 g
Locking system: Liner Lock
Clip: Hammered stainless steel
Notes: –

Knife withdrawn from private collection - Overall in very good condition, no original box (will be delivered with an alternative Viper box, but it will not be its own) - Original sharpening, never used - First series, still in Sandvik steel (current production is in 1.4416 steel) - Checked and certified by our in-house laboratory.

Intended use: Collection/Sportsman/Gentleman

Type of production: industrial
Country of production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: made of Resin, with real Partridge feathers inside and stainless steel liners
Blade length: 49mm.
Blade thickness: 3mm.
Length when closed: 75mm.
Thickness when closed: 12mm.
Total length: 125mm.
Weight: 68g.
Closure: Liner Lock
Clip: absent
Scabbard: absent
Notes: Drowned in resin, two elegant Partridge feathers find their place - design by Fabrizio "Sylvester" Silvestrelli - Knife withdrawn from private collection