Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fascinating knife used by the Japanese farmer "Higonokami kanekoma."

As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.

The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.

Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition, with a few small marks due to time.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small marks due to being placed in the scabbard and the passage of time.
* Box: Present and complete
* Scabbard: Present (not included at the time, but sold separately), original, brown leather, well maintained
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Sportsman

Type of production: Handcrafted
Country of Production: USA
Blade: CPM-S30V 58/59HRC stainless steel
Handle: micro-bead-blasted titanium with Black Canvas Micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 17mm.
Weight: 125g.
Closure: Frame Lock
Clip: removable, in micropallinated titanium
Packaging: December 2006 "Sebenza Classic MM" version - Previously purchased, from private collection - Full set, complete with white cardboard box with Chris Reeve logos and warranty certificates, original leather sheath with Chris Reeve logos

Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.

WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collection

Type of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Use: Tactical / Military

Blade: Stainless steel 154CM 58/60 HRC with PVD treatment
Handle: Zytel
Blade length: 95 mm.
Blade thickness: 3 mm.
Total length: 220 mm.
Length closed: 125 mm.
Weight: 115 g.
Clip: stainless steel
Locking system: liner lock with additional safety lock

Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: Collection

Production Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificates

The Nomad is a classic Al Mar knife designed by Kirk Rexroat and no longer in production for years. It's a tactical folding knife with textured black G-10 handles on a stainless steel frame with a liner lock. The blade is made of VG-10 stainless steel with a flat grind and smooth edge.

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously Purchased - knife no longer in production
Condition: in like-new condition
Commercial availability: difficult to find
Sharpness: factory sharpness
Blade marks: free of marks
Handle marks: free of marks
Box: original Al-Mar box
Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house Coltelleria Collini laboratory
Product Description

Intended Use: Sporting/Collectible
Production Type: Industrial
Blade: VG10 stainless steel
Handle: G-10
Blade Length: 95mm.
Blade Thickness: 70mm.
Closed Length: 110mm.
Overall Length: 185mm.
Balance:
Weight: 97g.
Lock: Liner Lock
Clip: stainless steel

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left head

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / Neck Knife / CQD

Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new

Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Sporting / EDC / Collection

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.

Knife withdrawn from private collection. Very rare model made by Extrema Ratio with Borut Kincl ( Slovenian martial arts master and trainer of police and military special forces) no longer in production since 2009 - Overall in very good condition. Complete with cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.

Intended use: tactical/military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Blade Production: Italy
Handle: PVD
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 235mm.
Balance: -
Weight: 195g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety catch when knife is open

Translated with www.DeepL.com/Translator (free version)

Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Hunting

Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - Unpacked

* Type: Previously purchased and used
* Condition: In like new condition - manufactured in 2010
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: No
* Marks on handle:  No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratory

Intended use: collection/sports

Production type: Mid-Tech
Country of production: USA
Blade: CPM-S30VN 58/59HRC stainless steel
Handle: Micro-shot peened titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

* Type: Previously purchased and used
* Condition: In like new condition
* Commercially available: Discontinued
* Sharpness: Original
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: yes
* Checked and Certified by our internal laboratory

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Handle: G10 and Carbon Fibre
Blade length: 70mm.
Blade thickness: 2.7mm.
Closed length: 103mm.
Total length: 171mm.
Closed thickness: 9.7mm.
Balancing: -
Weight: 54g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens Anso