Intended use: Hard Utility

Type of production: Semi-Industrial
Lama production: USA
Blade: 1095 carbon steel
Blade Treatment: Heat Treated 2XBlack Traction Coating
Handle: Micarta
Blade length: 141mm.
Blade thickness: 6.5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 438g.
Sheath: combat ballistic nylon
Packaging: envelope with guarantee certificates

PRY-PROBE-PUNCH TOOL
Dimensions: 175x35mm.
Max thickness: 12mm.

FOLDING SAW
Blade length: 80mm.
Open length: 195mm.

DOUBLE SCREWDRIVER
Dimensions: 105x45mm.

Fantoni - Hide Folder Micarta - Design by T. Rumici knife

Intended use: Fighter / Tactical / Collection

Type of production: industrial
Blade: Stainless Steel CPM-S30V 61-62HRC
Treatment Blade: Stone-Washed
Production Blade: Italy
Handle: Micarta Loveless
Blade length: 75mm.
Blade Thickness: 3.2 mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 102g.
Closure: Back Lock
Clip: Reversible, Stainless Steel
Notes: Design by T. Rumici and M. Fantoni

New Version 2014 with 5160 steel

Tops Knives - D.A.R.T. (Direct Action Rescue Team)

Type of production: semi-industrial
Blade: Carbon Steel 5160
Handle: Micarta
Blade Length: 190mm.
Overall Length: 330mm.
Blade thickness: 6mm.
Length Closed: -
Weight: 430g.
Closure: -
Sheath: Cordura
Notes: full tang

Sting - Sword of Bilbo Baggins - The Hobbit Version

In the Third Age of Middle-earth, the Hobbit Bilbo Baggins was unexpectedly swept into an epic quest to reclaim the lost Dwarf Kingdom of Erebor, which was long ago conquered by the dragon Smaug. Approached out of the blue by the wizard Gandalf the Grey, Bilbo found himself joining a company of thirteen dwarves led by the legendary warrior, Thorin Oakenshield.

In this harrowing journey Bilbo and his Company of Dwarves came upon a troll lair in Rhûdaur. There they found two Elven swords, Glamdring, and Orcrist, and a knife. Bilbo claimed the knife for himself, and it was more of a sword to someone of his stature. He wielded the sword through most of the quest, famously using it against the Giant Spiders of Mirkwood to save the Company of Dwarves. After Bilbo had slain his first spider he declared, "I will give you a name, and I shall call you Sting."

This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. The Sting sword is 22 1/4" overall, featuring a stainless steel blade and, solid metal hilt parts, and an intricately detailed vine adorning the grip. It is presented with a wood wall display featuring graphic motifs from The Hobbit: An Unexpected Journey, and includes a certificate of authenticity.

UC2892 Sting - Sword of Bilbo Baggins
Includes a parchment certificate of authenticity.
Overall Length: 22-1/4"
Blade Length: 15-3/8"
Blade Material: AUS-6 Stainless Steel
Handle Material: Solid Metal Guard and Pommel
Display: Wood with Wood Grain Finish and Silk Screen Graphic

Spada a una mano e mezza dall'ottima bilanciatura. Finitura bronzea su pomo, guardia e particolari in metallo del fodero.

Lama: in acciaio ad alto tenore di carboniopriva di filo
Lunghezza totale: 113 cm.
Lunghezza lama: 90,5 cm.
Spessore lama all’elsa: 4 mm.
Spessore lama alla punta: 3 mm.
Bilanciatura: avanzata a 12,5 cm dall’elsa.
Lunghezza impugnatura: 21 cm. (15,4 cm. la parte con copertura in cuoio)
Lunghezza elsa: 21 cm.
Peso spada: 1.140g.
Peso con fodero: 1.440g.
Fodero: pelle nera e acciaio
Impugnatura: pelle nera
Note: utilizzabile per praticare forme o per contatti leggeri/medi

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: sporivo/collezione

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: VG-10 59/60HRC e guance esterne in acciaio inox
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: acciaio damasco e cocobolo
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 96mm.
Lunghezza totale: 166mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Liner Lock
Clip: -
Fodero: cordura
Note: -

Utensili in acciaio non inossidabile, per la scultura e lavorazione del legno, tutti temprati, con durezza finale tra i 59-61 RC, accuratamente affilati a mano, e tutti dotati di impugnatura in legno. Sgorbia palmare per lavorare il legno
Set composto da 8 pezzi
Altezza con impugnatura in legno: 135mm
Altezza lama: 80mm

Misure presenti nella confezione:
Produzione: Svizzera

B1/12
B1s/12
B3/12
B5/12
B8a/10
B9/10
B12/8
B7/14

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CPM-S30V
Treatment Lama: -
Handle: Titanium
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 180mm.
Thick when closed: 16mm.
Balance: -
Weight: 96g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Laguiole folding knife made by hand with the steel of the famous CONCORDE

Intended Use: Collection

Type of production: Industrial
Production Blade: France
Blade: Stainless steel 12C27
Treatment Lama: -
Handle material: aluminum and black corian
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 118mm.
Total length: 226mm.
Thick when closed: 16mm.
Balance: -
Weight: 90g.
Closure: A simple spring
Clip: -
Sheath: -
Packaging: cardboard tube with logos and certified Laguiole en Aubrac
Notes:

Nuova versione 2014, ora con fodero più compatto e robusto e con attacchi di tipo Tek-Lok

Destinazione d'uso: Fighter/Tattico/Collezione

Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 80mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 69g.
Chiusura: -
Clip: in acciaio
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by T. Rumici

This battle ready sword, faithfully reproduces the sword of Sparta used in the 300 and 300 Rise of an Empire movies.

Blade: 1050 battle ready carbon steel
Handle: Burnished steel and finely stitched leather
Blade length: 65cm.
Total length: 76.50cm.
Blade thickness: 3mm.
Balance: advanced, at 7cm. from the guard branch
Weight: 1250g.
Sheath: in leather

One-handed classic medieval sword that contains all the characteristics of the 1300s blades.

Blade: high carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 84cm.
Total length: 100cm.
Blade thickness: 4mm.
Weight: 1445g.
Weight with scabbard: 1870g.
Balance: Advanced to 13.5cm.

Fantoni - William W. Harsey HB 01 Desert - knife

Intended use: Tactical / Sport

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Marto - Antique effect Celtic Dagger - Dagger historical

A peculiar characteristic of Celtic swords was the handle in the form of "X", otherwise known as anthropomorphic handle. The arms of the X constituted the lower limbs (wrapped around the "strength" of the blade) and higher than a human male whose head stood in the spot usually occupied by the knob. In the oldest specimens (sixth century BC), the anthropomorphic shape was very strong, with the "arms" of the man-handle raised in a praying position, almost forming a trident.

- 440 steel blade is dull
- Total length 44.5 cm
- Total length 30 cm
- Very good quality antiquing with the blade and the handle

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Trattandosi di un materiale naturale, segnaliamo che i modelli disponibili a magazzino potrebbero avere sfumature e colorazioni differenti dell'impugnatura

Destinazione d'uso: Sportivo/Collezione

Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura 1: Corno di Bufalo
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 18 esemplari - Design by T. Rumici

La saga Sword of the Ancients di Kit Rae continua con la spada Vorthelok.

La lama, non affilata, realizzata in acciaio inox 420 ha una lunghezza di 80cm e la spada ha una lunghezza totale di 115cm. ed un peso di 2880g.

L'impugnatura in corda nera è lunga 12.5cm, guardia e pomolo sono in acciaio inox.

La spada è accompagnata da un poster autografato e da certificati di garanzia ed autenticità United Cutlery.

Blade: carbon steel WITH ARROUNDED POINT and 4 MM THREAD suitable for battle ready
Grip: leather
Pommel: Carbon steel
Guard: carbon steel
Scabbard: leather and steel
Blade length: 99cm.
Total length: 127.5cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1840g.
Balance: 11cm.

Intended Use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 59/60HRC cheeks and stainless steel external
Treatment Lama: -
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Total length: 162mm.
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Around 1450, the long sword, often called "one-and-a-half", was widely used in war, but it was also often a weapon of self-defense for civilians. Coupled to a dagger it was excellent against thieves, brigands and assassins, often organized into gangs that roamed the countryside.

Equipped with a good tip and adequate length, it allowed opponents to be kept at a distance. Its average weight allowed it to be used easily with one hand, in combination with the dagger in the other. Moreover, thanks to the length of the handle, it could be used with both hands to have greater control and perform very powerful cuts.

Blade: carbon steel - NOT SHARP
Handle: black leather and wire
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 90cm.
Handle Length: 24cm. (including knob)
Total Length: 115cm.
Blade width: 45mm.
Blade thickness: 4mm.
Weight: 1514g.
Weight with Sheath: 1800g.
Balance: advanced to 13cm.

Blade: carbon steel
Handle: wood and leather
Knob: aluminum alloy
Guard: aluminum alloy
Sheath: -
Blade length: 91cm.
Handle Length: 15cm.
Total Length: 114cm.
Blade width: 50mm.
Blade thickness: 3mm.
Weight: 1360g.
Weight with Sheath: -
Balancing: Advanced to 9cm.
Support: Painted wooden wall plate

Hogue - EX-F01 5.5 "Fixed Drop Point Black Kote - G-10 G-Mascus Desert knife

Intended Use: Tactical

Type of production: Industrial
Production Lama USA
Blade: full tang stainless steel A2 to 57/59HRC
Treatment Blade: Black Kote
Handle: G-10 worked with 3D drawings G-Mascus
Blade length: 139mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 266mm.
Thick when closed: -
Balance: -
Weight: 310g.
Closing: -
Clip: -
Sheath: Ballistic Nylon with rigid insert and attacks SPRINGS
Packaging: Cardboard box with logos Hogue
Notes: Torx removable contained in the handle - Design by Allen Elishewitz

Hogue - EX-F01 5.5 "Fixed Drop Point Black Kote - G-10 G-Mascus Green knife

Intended Use: Tactical

Type of production: Industrial
Production Lama USA
Blade: full tang stainless steel A2 to 57/59HRC
Treatment Blade: Black Kote
Handle: G-10 worked with 3D drawings G-Mascus
Blade length: 139mm.
Blade thickness: 6.3mm.
Length closed: -
Total length 266mm.
Thick when closed: -
Balance: -
Weight: 310g.
Closing: -
Clip: -
Sheath: Ballistic Nylon with rigid insert and attacks SPRINGS
Packaging: Cardboard box with logos Hogue
Notes: Torx removable contained in the handle - Design by Allen Elishewitz

Nuova versione 2014, con acciaio 5160

Questo coltello è stato progettato per il reparto speciale BEST "Black Eagle Strike Team".Questa unità può rapidamente raggiunge e operare in qualsiasi ambiente, individuando, distruggendo o sabotando le linee nemiche, i radar, le stazioni missilistiche.

Destinazione d'uso: hard Utility

Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 5160
Trattamento Lama: Heat Treated 2XBlack Traction Coating
Manicatura: Micarta
Lunghezza lama: 175mm.
Spessore lama: 7mm.
Lunghezza totale: 315mm.
Bilanciatura: arretrata, ad 2cm. dal ramo di guardia
Peso: 538g.
Fodero: combat ballistic nylon
Confezione: busta con certificati di garanzia e numeri di serie

Destinazione d'uso: Collezione

Tipo di produzione: industriale
Lama: in acciaio inox XC70
Trattamento Lama: Anodizzazione
Produzione Lama: Italia
Manicatura: Titanio Anodizzato e Legno di Betulla
Lunghezza lama: 63mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 97mm.
Lunghezza totale: 165mm.
Bilanciatura: -
Peso: 58g.
Chiusura: Liner Lock
Clip: Amovibile in titanio
Fodero: -
Note: Design by Riboni