coltelli campeggio sportivi, coltello uso outdoor
-
Boker Plus - Collection 2024 by Les George - MagnaCut & Fat Carbon - 01BO2024 - pocket knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening systemBO-01BO2024 -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Victorinox - Evoke Alox - Terra Marrone - Limited Edition 2024 - 0.9415.L24 - knife
With an unmistakable and timeless design, Evoke Alox Limited Edition 2024 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Terra Marrone coloring, it allows you to reconnect with nature! With embossed and anodized aluminum cheeks, it's a really tough knife.
Intended Use: SportyType of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2024V-0.9415.L24 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1079FDE -
Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1077FDE -
Opinel - N°08 Le Savoyard Inox - Beech Wood - Knife
The N°08 Savoyard puts the accent on the cradle of Opinel: the mountains of Savoy!
The beechwood handle is lacquered and decorated with the Savoyard coat of arms. At the end of the handle is a red drawstring for easy carrying. The blade is made of stainless steel and the knife has a Viroblock safety ring.
Type of production: industrial
Country of manufacture: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with pad printing and red strap
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special edition 2023op-8sav -
Victorinox - Hunter Pro Alox - Electric Yellow - Limited Edition 2023 - 0.9415.L23 - knife
With an unmistakable and timeless design, Hunter Pro Alox Limited Edition 2023 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Electric Yellow coloring, it conveys a powerful burst of energy! With embossed and anodized aluminum cheeks, it's a really tough knife.
Intended Use: Sporty
Type of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2023V-0.9415.L23 -
Boker Plus - Kwaiken Mini Flipper Limited Edition 2023 by Lucas Burnley - 01BO497 - knife
Lucas Burnley's Boker Plus Kwaiken Flipper is arguably one of the most influential designs of the 21st century. With its clear and practical shape, this modern pocket knife has become a true icon. The clean lines and slim design, which nevertheless accommodates the entire blade when closed, are absolutely unique.
It is the further development of the well-known Burnley Kwaiken Classic, a knife also in the neo-Japanese style. The flipper ensures intuitive operation and increased safety, while the titanium framelock with stainless steel insert securely locks the M390 steel ball bearing blade.
The exclusive claim of this premium version, strictly limited to 500 pieces worldwide, is underlined by the carbon fiber handle scales with green inserts. The slim design and exclusive material make the Kwaiken a noble crossover between a gentleman's tool and a tactical combat knife.
To make this connection even easier, the Kwaiken Mini Limited offers the same outstanding qualities of its big brother with significantly smaller (and therefore more pocket-friendly) dimensions. The titanium clip is milled from solid, allowing it to be tipped up (r). Supplied with high quality nylon case.
Intended use: Sports/collection
Type of production: Industrial
Country of production: Taiwan
Blade: M390 steel
Blade treatment: satin finish
Handle: in titanium and carbon fiber
Blade length: 78mm.
Blade thickness: 3.2mm.
Total length: 184mm.
Weight: 79g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley limited edition of 500 pieces - pinball opening system on ball bearingsBO-01BO497 -
Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"ZT0022CU -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Lionsteel - Myto Damascus knife - Titanium Blue - MT01DBL - knife
Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with his strength:
has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment:
Handle: titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 118g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant fully recyclable cardboard box
Notes: Carson Flipper opening system on ball bearingsLS-MT01DBL -
Lionsteel - THRILL Damascus knife - SlipJoint Titanium Gray - TL D GY - knife
Thrill Aluminum is the SlipJoint knife with clip that can be inserted inside the handle in case of need thanks to the lionSTEEL HWAY.L - Hide What Annoys You system.
Designed by Molletta, it is equipped with a “no locks” mechanism and has a SOLID® Knife handle, made from a single block of aluminum. The handle, light and easy to grip, is available in black, red, green and orange.
The blade is in Scrambled damask (Chad Nichols).
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment: Satin
Handle: Titanium machined from solid
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel flap
Clip: retractable, machined from solid
Packaging: cardboard box with LionSteel logos
Note: -LS-TLDGY -
Boker Plus - Aphex Mini knife by Burnley - 01BO197 - folding knife
The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.
Intended use: Collection
Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by BurnleyBO-01BO197 -
Carl Schlieper - Folder Classic knife - micarta - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years, various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with micarta handle - knife made in Germany in the 90s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 70mm.
Total length: 173mm.
Balancing: -
Weight: 107gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-GMI -
Carl Schlieper - Poket knife - micarta - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with micarta handle - knife made in Germany in the 90s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 81gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-MI -
Carl Schlieper - Poket knife - wood - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with wooden handle - knife made in Germany in the 1990s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and wood
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 82gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-LE -
Benchmade - Model 85 Billet Titanium knife - knife
*** ATTENTION: PAYMENT FOR THIS ITEM CANNOT BE MADE WITH PAYPAL ***
Intended use: sports / collection
Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: satin
Handle: Billet Titanium machined from solid and numerically controlled
Blade length: 112mm.
Blade thickness: 3.1mm.
Closed length: 139mm.
Total length: 254mm.
Weight: 149g.
Closure: Magnetic T-latch
Clip: -
Sheath: Black nylon
Packaging: Cardboard box with Benchmade logos
Note: -BM-85 -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Buck - Buckmaster 184 Survival Knife -1984 - COLLEZIONE PRIVATA - vintage coltello
The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.
The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.
Destination of use: Sportivo / Collezione
Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.BUCK-184 -
Mcusta - Take knife VG10 Damascus - Shinra Series - Stamina Wood - MC-0075D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0075D -
Mcusta - Tsuchi Damascus knife - Shinra Stamina Wood - MC-0078D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0078D -
Mcusta - Katana knife series - MC-0044C - Black / Green - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0044C -
Mcusta - Katana knife series - MC-0042C - Blue / Orange - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with VG-10 edge hardened to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0042C -
Mcusta - Masamune Dates MC-0186D knife - VG10 Damascus SanMai - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Notes: -MC-0186D -
EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORG -
Opinel - Display Glass Collection 10-piece stainless steel blade - knife
Opinel - Display Glass Collection 10-piece stainless steel blade - knife
Invented in 1890 and still today produced in Savoy, the pocket knife Opinel is famous worldwide.
Collection Set of 10 pieces 2-12 with glass lid
Type of production: Industrial
Production Lama France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Wood
Packaging: Wooden box with logos Opinelop-001314 -
Mcusta - Take VG10 Damascus - Shinra Series - Black PakkaWood - MC-0076DP - knife
Intended use: sport / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood, worked bamboo style
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0076DP -
SOG - Vulcan Tanto knife - VL-03 - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Yes original
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratoryIntended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: laminated stainless steel with VG-10 cutting edge
Blade Treatment: -
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length 123mm.
Total length: 210mm.
Closed thickness: 21.5mm.
Balancing: -
Weight: 144g.
Closure: Arc Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with SOG logos
Note: -AP-SOG-VL03 -
Cold Steel - Ultimate Hunter VG-1 Made in Japan - PRIVATE COLLECTION - CS61LPS - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, unused
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard:/
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Hunting / Sporting
Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 216mm.
Weight: 122g.
Closure: Back Lock
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: discontinued item, like new, from private collectionCS61LPS-CP -
Fallkniven - Phantom - Elmax & Desert Ironwood 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.
The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.
The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details.
The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.
Intended use: sports/hunting/utility
Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard caseF-PHanniv -
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Chris Reeve - Large Sebenza 31 Plain Tanto - MagnaCut & Titanium - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted
Blade length: 91.7mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 213.5mm.
Weight: 133g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-L31-1010 -
Chris Reeve - Inyoni Drop Point - MagnaCut & Natural Canvas Micarta - knife
In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird." Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.
Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.
Intended use: sports/hunting
Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warrantiesCR-INY-1001 -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Wander Tactical - Barracuda Tanto Compound Knife - Raw & Black Micarta - Custom Knife
Use: EDC / Light Utility / All Round
Type of Production: Handcrafted
Country of Production: Italy
Blade: Integral, D2 steel at 59/61HRC
Blade Treatment: -
Handle: Micarta
Blade Length: 100mm
Blade Thickness: 5mm
Total Length: 205mm
Balance: Rearward
Weight: 214g
Sheath: Thermoformed Kydex, with tek-lok attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors, and materials compared to the photographed productWT-BARRT-B -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-BARR-BL -
Opinel - No. 08 Sampo - Curly Birch Wood - Limited Edition - Knife
In Finnish mythology, the Sampo is a magical object that brings wealth to the people who own it. But no one really knows what this object looks like? Maybe an Opinel?
Discover the No. 08 Sampo pocket knife: polished handle made of curly birch from Finnish forests and 8.5-cm stainless steel blade with a mirror-polished finish. Curly birch is a subspecies of silver birch that grows in Nordic countries and has slightly spotted veins studded with small meanders. Each knife is therefore unique and special and will never be the same as another!
Intended Use: Sporting / Collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: mirror polish
Handle: Curly birch wood
Blade length: 85mm.
Blade thickness: 1.5mm.
Length closed: 108mm.
Total length: 190mm.
Thickness when closed: 20mm.
Weight: 58g.
Closure: Virobloc
Clip: -
Scabbard: -
Packaging: Cardboard box with Opinel logos and stylized birch barrel designs
Notes: Limited edition, not numberedOP-08-SAMPO -
Al-Mar - Nomad Pocket Knife - ND-2 - VG10 - PRIVATE COLLECTION - knife
The Nomad is a classic Al Mar knife designed by Kirk Rexroat and no longer in production for years. It's a tactical folding knife with textured black G-10 handles on a stainless steel frame with a liner lock. The blade is made of VG-10 stainless steel with a flat grind and smooth edge.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased - knife no longer in production
Condition: in like-new condition
Commercial availability: difficult to find
Sharpness: factory sharpness
Blade marks: free of marks
Handle marks: free of marks
Box: original Al-Mar box
Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house Coltelleria Collini laboratory
Product DescriptionIntended Use: Sporting/Collectible
Production Type: Industrial
Blade: VG10 stainless steel
Handle: G-10
Blade Length: 95mm.
Blade Thickness: 70mm.
Closed Length: 110mm.
Overall Length: 185mm.
Balance:
Weight: 97g.
Lock: Liner Lock
Clip: stainless steelAP-ND-2 -
Spyderco - Street Beat by Fred Perrin - PRIVATE COLLECTION - FB15P - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Sporting / Neckwear
Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carrySFB15P-CP -
Chris Reeve - Umnumzaan Clip Point - 2015 NOS Full Set - PRIVATE COLLECTION - knife
KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 2015 NOS new old stock - New from stock
* Condition: Like new, never taken out of original packaging.
* Commercially available: Hard to find
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Production Type: Mid-Tech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade finish: stonewashed
Handle: Titanium 6AI4V
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 17mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Packaging: white cardboard box with Chris Reeve logos, Warranty certificates
Notes: NOS knife, new from stock - Includes box and certificatesCR-UMC-CP -
Boker - Magnum 2023 Collection Limited Edition by Lucas Burnley - 02MAG2023 - knife
Magnum continues the tradition of its annual knives and presents the Collection 2023, a collector's knife with exceptional appeal. Passionate knife collectors around the world will once again be faced with the choice of whether the knife should find a place in the display case or on the belt. Lucas Burnley, considered one of the world's most renowned knife designers and who has already launched several successful knife series for Boker and Boker Plus, was won over for this special project. The knife maker from the U.S. state of Oregon knows how to combine clear lines and tactical influences in his designs like no other.
The Magnum Collection 2023 is an impressive full tang outdoor knife with a massive D2 blade that features a pronounced ricasso and an unusual two-tone finish. The designer alternates between a horizontal and vertical finish on the blade, which underscores the special appeal of the fixed-blade knife. Attention to detail also continues in the contoured handle with black polished Micarta grips that gives excellent user ergonomics for effortless work. Features include a high-quality leather sheath with two snap fasteners, an exclusive collector's box, and a certificate of authenticity. The Magnum Collection 2023 is strictly limited to 1999 pieces worldwide.
Intended Use: Collection/Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: full tang in D2 steel
Blade finish: dual tone
Handle: Micarta
Blade length: 174mm.
Blade thickness: 4.8mm.
Total length: 305mm.
Weight: 353g.
Sheath: black leather
Package: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Lucas BurnleyBO-02MAG2023 -
Pohl Force - Bravo Two Classic - Black Two Tone ATS-34 - 1078 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1078BK -
Pohl Force - Bravo One Classic - Black Two Tone ATS-34 - 1076 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1076BK -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Andre De Villiers ADV - Kudu Hunter Fixed - M390 & Black G10 - knife
The Kudu Hunter fixed-blade knife offers an excellent balance between form and function: the wide drop point blade is reminiscent of its predecessor model Harpoon, but without the dedicated thumb rest. The handle is extremely comfortable for different types of grips, and its shape does not cause fatigue during long periods of use. The Kydex scabbard has a Kydex belt loop that allows you to switch between normal belt carry and scout carry, right or left handed, with ease. This is truly an excellent "all-around" design by Andre.
Intended use: collection/sporting
Type of manufacture: midtech
Country of manufacture: South Africa
Blade: full tang, stainless steel M390
Blade treatment: Satin finish
Handle: Black G10
Blade length: 115mm.
Blade thickness: 4.8mm.
Total length: 228mm.
Balance: backward
Weight: 205g.
Sheath: carbon fiber-effect kydex with multi-position belt attachment
Packaging: -
Notes: designed and made entirely by Andre De VilliersADV-KH -
Boker - Vintage 523 Briarwood - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: very good, mirror polished blade with a few slight surface marks (visible against the light) from being inserted in the sheath - a few dots of oxidation on brass guard and pommel
* Commercially available Out of production
* Sharpening: Original edge
* Marks on blade: yes, light and superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good condition
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratoryIntended Use: Utility/Hunting
Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 440C
Blade finish: Mirror polished
Handle: Briar
Blade length: 123mm. (edge 112mm.)
Blade thickness: 4.4mm.
Total length: 230mm.
Weight: 162g.
Sheath: leather
Packaging: -
Notes: -AP-BOK-VIN -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
Carl Schlieper - Survival Companion Knife - Vintage - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryCarl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Intended use: Collection / Survival
Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent conditionCS-SCK-CP-1 -
Guardian Tactical Usa - Deltrix Tactical Folder knife - PRIVATE COLLECTION - CF DK - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to 2015
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Guardian Tactical logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory100% USA Guardian Tactical, an American company specializing in the design and manufacture of tactical knives. Guardian Tactical combines obsessive and partly artisan attention with the use of modern and technologically advanced machinery in order to obtain almost perfect products with extremely high quality performance.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark StoneWash
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -AP-DeltrixDK -
Cold Steel - Ti-Lite 6" - CTS-XHP Aluminum - 26ACSTX - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, replaced by new variants in different steels
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: No
* Box: Yes, original, in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Microbead blasted
Handle: Duralumin A7075
Blade length: 152mm.
Blade thickness: 4mm.
Length closed: 178mm.
Total length: 330mm.
Thickness when closed: 22mm.
Weight: 258g.
Closure: LinerLock type
Clip: removable, painted stainless steel
Notes: discontinued knife, like new, withdrawn from private collectionCS26ACSTX-CP -
Boker - Magnum Collection knife 2009 - 02MAG2009 - knife
RETIRED KNIFE FROM A PRIVATE COLLECTION - 2009 edition limited to 1999 pieces
* Type: Previously purchased
* Conditions: In like new condition
* Available on the market: no longer in production, difficult to find
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, rigid case with Boker Magnum Collection 2009 logos
* Sheath: leather sheath
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 185mm.
Blade thickness: 6.5mm.
Total length: 315mm.
Weight: 515g.
Sheath: Black leather
Packaging: Rigid case with Boker Magnum Collection 2009 logos
Notes: Limited and serialized edition of only 1999 pieces worldwideBO-02MAG2009 -
Boker - Magnum Collection knife 2010 - 02MAG2010 - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA - Edizione del 2010 limitata a 1999 pezzi
* Tipologia: Precedentemente Acquistato
* Condizioni: In condizioni pari al nuovo
* Reperibile in commercio in commercio: non più in produzione, di difficile reperibilità
* Affilatura: Originale
* Segni su lama: no
* Segni su impugnatura: no
* Scatola: originale, cofanetto rigido con loghi Boker Magnum Collection 2010
* Fodero: fodero in cuoio
* Manuali, Certificati e Garanzie: originali
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Sportivo/Collezione
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox 440C
Trattamento Lama: Satinata
Manicatura: White Micarta
Lunghezza lama: 180mm.
Spessore lama: 6,5mm.
Lunghezza totale: 320mm.
Peso: 435g.
Fodero: Cuoio nero
Confezione: Cofanetto rigido con loghi Boker Magnum Collection 2010
Note: Edizione limitata e serializzata di soli 1999 pezzi in tutto il mondoBO-02MAG2010 -
Buck - General knife 120 - COLLECTION PRIVÉE - couteau vintage 90
COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne
Utilisation prévue : TactiqueType de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -AP-BUCK-120 -
Jim Burke - RockStar Titanium Folder - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available in hard-to-find trade.
* Sharpening: Original
* Marks on blade: no
* Marks on handle: small abrasions on clip.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Type of production: Midtech (semi-industrial)
Country of manufacture: USA
Blade: Stainless steel CPM-154CM
Blade treatment: Dual tone: stonewashed and satin-finished
Handle: stonewashed titanium
Blade length: 80mm.
Blade thickness: 3.2mm.
Length closed: 112mm.
Total length: 195mm.
Thickness when closed: 10mm.
Weight: 130g.
Closure: Framelock
Clip: Removable, titanium
Notes: knife withdrawn from private collectionJB-RF-CP -
Zero Tolerance - Sinkevich knife Flipper Titanium - ZT0456 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria ColliniIntended use: Sports / Collection
Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearingsAP-ZT0456-2 -
Al-Mar - Payara Knife - AMPA2 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Al-Mar box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria ColliniProduct description
Intended use: sports / collection
Type of production: industrial
Blade: in VG10 stainless steel
Handle: G-10
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing:
Weight: 146g.
Closure: Liner Lock
Clip: in stainless steelAP-AMPA2 -
Sandrin knives - Monza Zirconium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-Z -
Cold Steel - Espada XL knife - PRIVATE COLLECTION - 62NX - knife
Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -AP-62NX -
Boker - Magnum Collection 2022 - Limited Edition - 02MAG2022 - fixed knife
The various models of the Magnum Collection have been adorning the windows of countless knife enthusiasts for many years. This year's collector's knife was designed by Brian Efros of Colorado and combines well thought out construction with high quality materials and perfect workmanship. The full-time cutler has been designing and manufacturing his own knives since 2008 and is now known far beyond the country's borders. Full order booklets, perfect workmanship and individual implementation ensure that his hand-made pieces reach the best prices internationally.
The Magnum Collection 2022 is an outdoor knife with an extremely robust drop point blade in satin D2. The screwable titanium handguard and the pronounced indentation of the fingers prevent involuntary blade slipping and thus safety at work. The OD green grip scales of the full tang construction are made of textured micarta and are held in place by decorative titanium screws. The combination of ergonomic design and pleasing shape also offers an exceptionally fuller grip feel. This unique collector's knife is strictly limited to 1999 pieces worldwide. Comes with a high quality leather sheath in an exclusive collector's box and with a certificate of authenticity.
Intended use: Collection / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: full tang in D2 steel
Blade finish: satin finish
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4mm.
Total length: 237mm.
Weight: 191 g.
Sheath: in black leather
Packaging: gift box with guarantee certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copiesBO-02MAG2022 -
Mission - MPK10-A2 Plain Edge - Navy Seal Knife - USED - Knife
Knife withdrawn from private collection - Used, but overall in good condition - An iconic, iconic knife from the first decade of the 2000s, tested and selected by the U.S. Navy Seals - The knife already when new presented itself with an average low level of finish and with a rough micropeened blade already very delicate and marked, this knife, used in the field by an Italian soldier in theaters of war, shows signs of cosmetic wear on both blade and sheath that do not affect its functionality in the slightest - Factory sharpening still in excellent condition - Original amphibious scabbard, in very good condition - No box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / MultiroleType of Manufacture: industrial
Blade: A2 steel hardened to 57/58HRC
Country of Production: USA
Handle: made of Hytrel
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 360g.
Sheath: amphibious, made of Hytrel
Packaging: without original packaging
Notes: used knife, withdrawn from private collection, overall in good conditionMI-MPK10-A2 -
Carl Schlieper - Vintage Survival Companion Bowie - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.
Intended use: Collection/Survival
Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good conditionCS-SCK-CP -
Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-BARR-B -
Chris Reeve - Large Sebenza 21 Plain knife - Insingo - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection, Chris Reeve model out of production and no longer available on the market. In excellent condition, complete with original box, certificates, stickers, cleaning cloth, fluorinated grease and maintenance key - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008-CP -
Takeshi Saji - Koinobori knife - red carp skin - PRIVATE COLLECTION - Craft Knife
Knife collected from a private collection in like new condition with original box - Knife made in 2017 by the famous Japanese knifemaker Takeshi Saji - The knife is supplied together with the sheath made by Saji, with an additional sheath made by the Italian cutler Simone Tonolli. This second sheath allows horizontal attachment to the belt. Checked and certified by our internal laboratory.
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, Yoshoku laminated damask with Hitachi Aogami cutting edge at 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closure: -
Clip: -
Sheath: two leather sheaths, one produced by Takeshi Saji for vertical positioning and one made by the Italian knifemaker Simone Tonolli for horizontal fixing
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiAP-TS-KOIR -
Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife
Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can visit the website: www.collinisteel.com
AP-MC-0203G