Christmas

In the late 1980s, Walter Fortunato designed and built the stopper sealing system that has made Waf famous throughout the world. The Block Waf System© still represents the most ingenious invention for preserving the precious characteristics of newly uncorked sparkling wines over time. The patent, applied in many items in the stoppers line, follows Pascal's principle that pressure exerted on a fluid is transmitted in all directions with equal intensity. By applying Pascal's principle to the bottle, the elastic teat goes to adhere to the inner wall of the mouthpiece. The head gasket with which the teat is fitted tends to rest against the top edge of the bottle, creating an initial obstacle to the escape of carbon dioxide. The carbon dioxide, again due to Pascal's principle, enters the teat through the hole below and as the pressure increases it goes to expand against the glass wall thus creating a state of overpressure inside. The external fixing bracket is designed to counteract the vertical thrust that the stopper receives and thus ensures its tightness, which has been tested up to 6 atmospheres.

Equipped with -Block WAF SYSTEM © with certified seal over 6 ATM.

MATERIAL: High-carbon chrome-plated steel. Plastics certified for food contact

COLOR: Gold

SIZE: 4.5 x 4.0 x 6.2 cm

WASH: By hand, do not use abrasive sponges and/or detergents.

Pavoni - SNOW TREE mould PX4396 - 20 impressions

At Christmas surprise with the most original ideas thanks to this mould.

Snow Tree PX4396 Pavoflex by Pavoni Italia is the silicone mould for single portions desserts which allows you to create snowy tree-shaped sweets perfect for Christmas time.

Snowy little trees are the ideal decoration for your festivity table, and thanks to this mould you can realize them in a very simple and fast way, but with an effect higher than any expectation! -and give your favourite party a unique look, even in large productions! With this mould you can make 20 small Christmas trees to decorate with creativity and imagination! Pavoflex is injection moulded, a technique that allows perfect detail definition.

Line: Pavoflex

Mould: SNOW TREE

Material: 100% platinic silicone, suitable for food contact

Mould size: 40 x 30 cm

Number of impressions: 20

Single impression size: Ø 6.5 cm H 7.5 cm

Volume: 100 ml

Mould features:

Suitable for fridge/freezer/microwave oven (no crisp)

Temperature range: -40°C/+280°C

Dishwasher-safe, no rinse aid required

Toxic, odourless and tasteless

Flexible and space-saving

Unbreakable and long-lasting.

Pavoni - SNOWFLAKE silicone mould by P. Griffa - 24 impressions

From the collaboration between Pavoni Italia and the esteemed chef Paolo Griffa, Gourmand is born, the line of moulds for HORECA and catering. An experience that combines shape and taste, using light and surprising designs.

Silicone moulds suitable for the preparation of refined appetisers, main courses and desserts. Creations rich in detail, inspired by the organic forms of Nature and the pure lines of geometry.

With Snowflake you can make 24 decorations in the shape of snowflakes and ice crystals!

Make your dish unique, no limits to your imagination, the watchword is experiment!

Chef: Paolo Griffa

Line: Gourmand Mould: SNOWFLAKE

Single mould shape: snowflakes of different sizes

Recommended for catering.

Material: 100% platinic silicone, suitable for food contact

Mould size: 30 x 20 cm

Number of impressions: 24

Imprints:

8 from Ø 2.3 cm H 1.5 mm

7 Ø 3.5 cm H 1.5 mm

5 Ø 4.6 cm H 1.5 mm

4 by Ø 5.7 cm H 1.5 mm

Mould features:

Suitable for fridge/freezer/kettle

Suitable for oven/microwave oven

Temperature range: -40°C/+250°C

Dishwasher-safe, no rinse aid required

Toxic, odourless and tasteless

Flexible and space-saving

Unbreakable and long-lasting.

ONE-LIGHT is a portable and rechargeable "outdoor, in-door" LED Lampshade Lamp that can be easily housed on the neck of a bottle.

NEW 2023

On the coffee table of a restaurant or bar, in a living room, in a study where it illuminates areas of dimness, ONE-LIGHT can become a piece of furniture that is impossible to resist.

Thanks to its simple and modern design, it fits perfectly into any environment.

The body is made of Veroglas technopolymer, in as many as 13 colors to suit all tastes, and features a raised surface decoration reminiscent of the surface of the moon.

At the bottom, it has a rubber ring that fits the bottle rim.

The two-intensity, waterproof LED light source provides up to 24 hours at medium light intensity, up to 10 hours at maximum light intensity.

USB cable included for charging the lamp.

ONE-LIGHT conveniently recharges with any battery charger.

Charging time: 5-6 hours.

DIMENSIONS: Ø 103 mm x 88 mm x Ø 77 mm

Pavoni - Silicone mould FOLIAGE by P. Griffa - 3 impressions

Ephemeral, light and organic shapes. -Detailed textures, surprising details.

A line of silicone moulds to be used for MAIN DISHES, APPETIZERS AND SWEETS.

Different interpretations to experiment with for hot or cold dishes, broadening the spectrum of solutions.

A unique spark to unleash your creativity.

Silicone mould 300x200 mm

Dimensions of impressions: diam. 115 X h 1, 5mm

Number of impressions: 3.

Pavoni - MANDALA silicone mould by P. Griffa 

12 impressions -Ephemeral, light and organic shapes.

Detailed textures, surprising details.

A line of silicone moulds to be used for MAIN DISHES, APPETIZERS AND SWEETS.

Different interpretations to experiment with for hot or cold dishes, broadening the spectrum of solutions.

A unique spark to unleash your creativity.

Silicone mould 300x200 mm

Impression dimensions: diameter 55 X height 2 mm

Number of impressions: 12.

Pavoni - Silicone mould HONEY BEES by P. Griffa - 52 impressions

Ephemeral, light and organic shapes.

Detailed textures, surprising details.

A line of silicone moulds to be used for MAIN DISHES, APPETIZERS AND SWEETS.

Different interpretations to experiment with for hot or cold dishes, broadening the spectrum of solutions.

And a unique spark to unleash your creativity.

Silicone mould 300x200 mm

Dimensions of impressions ( 3 sizes od bees) : diam. 20 x 1.5 mm, diam. 25 x 1.5 mm, diam. 30 x 1.5 mm

Number of impressions: 52.

Pavoni - Set of 2 cookie cutter Holly leaf 

Set consisting of 2 ejector pasta cutters in the shape of a holly leaf with veins.

For making refined and individual decorations for cakes made with almond paste, chocolate, salt dough, modelling and colouring dough.

Made of food-grade plastic material.

2 sizes: 40 - 30 mm.

Pavoni - XMAS VILLAGE tablet mold - PC5038FR

Characteristics and standards of use:

• Resistance to mineral acids, fats, oils and alcohols.
• Extreme dimensional stability.
• Remarkable resistance to fracture under load.
• Usage range of -40°C to +120°C.
• Hand washing or dishwashing with neutral detergents is recommended.
• Do not use abrasive tools for cleaning as they would tend to dull the shiny parts of the mold.
• Do not dry in a microwave oven.
• Do not use near direct heat sources or directly on flames.

Pavoni Italia's Quality Service has developed for this product line an assiduous and constant control on every single piece, in order to guarantee a product of excellence, free of defects and imperfections.

Surprise at Christmas with the most original ideas

thanks to this mold born from the collaboration

between the Pavoni Italia research team and the imagination of Frank Haasnoot.

Each shape is designed to guarantee perfect demodels and give you the highest fidelity in details.

And give your most beloved party a unique look, even in large productions!

With this mold you can make 12 super cute Santas to decorate with creativity and taste!

Pavoflex is injection molded,

a technique that allows perfect detail definition.

Material: 100% platinic silicone, suitable for food contact

Mold size: 40 x 30 cm

Number of impressions: 12

Single imprint size: 6 x 7.2 cm H 7 cm

Volume: 128 ml

Mold features:

Line: Pavoflex Suitable for fridge/freezer/kitchenette

Suitable for oven/microwave oven

Temperature range: -40°C/+250°C

Dishwasher-safe, no rinse aid Non-toxic, odorless and tasteless Flexible and space-saving Unbreakable and long-lasting

Completely reinvent the buche de Noel! Take a look at the modern take on a tradition cake with Express Log, a design developed in collaboration with World Chocolate Master Frank Haasnoot, for yule logs full of elegance and creativity, to be reinterpreted with your own style. Silicone mould for log Express log.

This 1435 ml hole mould in the shape of a train locomotive, is suitable for both hot and cold creations.

Line: Pavocake

Material: 100% platinum silicone mould

Mould size: 25.4 x 8.8 cm H 10.6 cm

Volume: 1425 ml

Temperature range: -45°C to +250°C

Suitable for oven, microwave (no crisp), fridge, freezer and blast chiller

Dishwasher-safe, no rinse aid required.

Completely reinvent the buche de Noel! Take a look at the modern take on a tradition cake with Santa Log, a design developed in collaboration with World Chocolate Master Frank Haasnoot, for yule logs full of elegance and creativity, to be reinterpreted with your own style. Silicone mould for log Santa Log.

This 1300 ml hole mould, made of many cute Santas, is suitable for both hot and cold creations.

Line: Pavocake

Material: 100% platinum silicone mould

Mould size: 25,4 x 10,3 cm H 10 cm

Volume: 1300 ml

Temperature range: -45°C to +250°C

Suitable for oven, microwave (no crisp), refrigerator freezer and blast chiller.

Dishwasher-safe, no rinse aid required. 

Honeycomb SKU GG047S

Ephemeral, light and organic shapes.

Detailed textures and outstanding details.

A line of silicone moulds that can be used for main courses, appetizers and desserts.

A wealth of interpretations, to experiment with both hot and cold dishes, enriching the range of possibilities.

And a unique spark to unleash your creativity.

Silicone mould 300x200 mm

Indent: max 67,5x60,5x2 h mm

Indent volume: ~ 2

Number of indents: 8.

Pavoni - Silicone mould line Pavoflex 15 BABA' impressions

More than 50 innovative shapes to realize sweet or salty mignon and monoportions. Pavoflex is injection moulded, technique that allows a perfect definition of details. Pavoflex is injection moulded, a technique which allows a perfect definition of details. Ideal in oven and blast chiller (from -40°C to +250°C) A single-portion with essential lines and well balanced in its parts. Perfect either decorated or simply sprayed or iced.

A new line of silicone moulds by Pavoni.

An original reinterpretation of baba, one of the most famous traditional sweets, to be tasted by the spoon.

The mould is made of 100% platinum silicone and it is suitable both for hot and cold creations. The package includes a pastry cutter.

Babà

SKU PX4382S

 Silicone mould for single-serving portions.

Tradition on a spoon.

Single-serving portion dimension: mm 78x54x46 h ~ 96 ml

Cutter included

15 indents.

Raven TOP24 - blackberry shape SKU TOP24S Dim mould.190 x 190 x h 23 mm Ø mm 180x22 h 1 indent vol. ~ 380 ml The pastry translated into a total sensory experience. From the wisdom and passion of Stefano Laghi and Sebastiano Caridi - in collaboration with the research team Pavoni Italia - are born the new molds of the line Top, to interpret the fruit in every detail. Eight simple and immediate shapes, able to reproduce creative compositions in a single indent that will save your time during the work. Ideas, technique and passion from two famous pastry chefs, to give a twist to the taste of your preparations and new textures to the palate. Can be combined with micro-perforated stainless steel bands, Voilà disposable moulds and Pavoflex silicone mould PX075

Pavoni - Silicone mould line Pavoflex SFERE

Silicone moulds 300x400 mm for professional use only.

More than 50 innovative shapes to realize sweet or salty mignon and monoportions.

Pavoflex is injection moulded, technique that allows a perfect definition of details.

Ideal in oven and blast chiller (from -40°C to +280°C).

SFERE mould available in 2 versions:

PX4315

Cavity size: 40 mm

Cavity volume: 33 ML

24 impressions

PX4314

Cavity size: 20 mm.

Cavity volume: 4 ml

48 impressions

PX4313

Cavity size: 30 mm.

Cavity volume: 14 ml

30. impressions

Pavoni - Silicone mold Pavoflex 12 impressions PASSION

Pavoni - PASSION PX4325 300x400 mm platinum silicone molds for professional use only.

Over 50 innovative shapes to make sweet or savory mignon and single portions. Pavoflex is injection molded, a technique that allows perfect definition of details. Pavoflex is injection molded, a technique that allows perfect definition of details. Ideal in the oven and blast chiller (from -40 ° C to + 280 ° C) A single portion with essential lines and well balanced in its parts. Perfect whether decorated or simply sprinkled or glazed.

Ideal in the oven and blast chiller (from -40 ° C to + 280 ° C) 30

IMPRONTE 12 VOL: 100 ML

Pavoflex 300x400 mm.

Pavoni - Silicone Mould PASSION PX4325

Top-level, liquid platinic silicone moulds 300x400 mm, for professional use only.

More than 50 innovative shapes to realize sweet or salty mignon and single portions.

Pavoflex is produced with a special injection presswork method to let a perfect definition of details.

Perfect in oven and blast chiller (from -40°C to + 250°C) 30 INDENTS VOL: 18 ML

Pavoni - Eros silicone mold - Emmanuele Forcone A new line of silicone molds created in collaboration with Emmanuele Forcone, world champion of pastry. The molds, inspired by nature and new suggestions, allow unique decorations capable of enhancing each creation with games of volumes and textures. Chocolate and artistic sugar are two passions, I would say almost two diseases. Chocolate is the one that has the greatest commercial implications. But also artistic sugar has been growing a lot in recent times, and it gives me great satisfaction. "Italian pastry champion in 2010, Emmanuele Forcone was runner-up at the Coupe du Monde de la Patisserie in 2011. Executive pastry chef of the Pannamore pastry shop in Vasto, he has been to Australia several times to bring Italian pastry art to the world, and over the years he has specialized in chocolate and artistic sugar. In 2015 he conquered the highest podium of the Coupe du Monde de la Patisserie in Lyon and from then he collaborates assiduously with Pavoni Italia on different lines, including "Emmanuele's cakes" "TuttiFrutti" and the new range of colors. Molds for the creation of spectacular desserts with a particular three-dimensional effect studied by the world champion of Pastry Emmanuele Forcone. Perfect to celebrate the most romantic moments DIMENSIONS: mm 179x178x48 h VOLUME: ~ 1022 ml

MONOPORTIONS TRANSPARENT SQUARED TRAYS Monoportion trays: beautiful, practical and must have to serve your creations at your best. Available in white, transparent and black colour,. DIM. cm 8 x 8 Box of 50 pieces

Silicone baking supplies from Pavoni combine the ease of baking in flexible non-stick bakeware, with chic Italian design. Introducing the Pavocake range of Pavoni Silicone Baking Pans and Molds, these pans are great for cakes, ice creams, jellied desserts and more. These pans are freezer, microwave and oven safe, temperature resistant up to 536 degrees, and you can even wash them in the dishwasher. Pavoni silicone baking supplies won’t pick up residual odors or tastes from other foods, and their flexibility makes these pans so easy to clean, and to store. Non-stick with slick upper for easy removal of food and little cleaning Pliable for pushing out pastry product or peeling sheet off frozen food product Safe in convection ovens, static ovens and microwaves Resistant to cold (-40C / -40F) and heat (280C / 536F) To clean a Pavoflex mold after use, rinse with hot water. If the mold is dirty, rub with soft sponge and mild soap (like the liquid kind used on dishes). To sanitize the mold, leave in oven for two minutes at 150C (302F). Mould dim. 300 x 175 mm 9 indents - dim. 81 x 41 x h 19 mm vol. 42 ml It can be combined with XF12 Progetto Crostate is even richer. New Pavoflex 300 x 175 silicone moulds for single-serving tarts perfect the range of stainless steel bands, trays, grids and Forosil pads. “Progetto Crostate means giving tools to develop your creative side. It’s something bigger, which goes beyond the mould. Pastry must give emotions: only in this way we can make art match with our work”

Silicone baking supplies from Pavoni combine the ease of baking in flexible non-stick bakeware, with chic Italian design. Introducing the Pavocake range of Pavoni Silicone Baking Pans and Molds, these pans are great for cakes, ice creams, jellied desserts and more. These pans are freezer, microwave and oven safe, temperature resistant up to 536 degrees, and you can even wash them in the dishwasher. Pavoni silicone baking supplies won’t pick up residual odors or tastes from other foods, and their flexibility makes these pans so easy to clean, and to store. Non-stick with slick upper for easy removal of food and little cleaning Pliable for pushing out pastry product or peeling sheet off frozen food product Safe in convection ovens, static ovens and microwaves Resistant to cold (-40C / -40F) and heat (280C / 536F) To clean a Pavoflex mold after use, rinse with hot water. If the mold is dirty, rub with soft sponge and mild soap (like the liquid kind used on dishes). To sanitize the mold, leave in oven for two minutes at 150C (302F). New silicone single serving molds which will help you in making spectacular dessert with a peculiar 3D effect studied by the World Pastry Champion Emmanuele Forcone. BELOVED PX4370 NEW! EMMANUELE FORCONE SINGLE SERVINGS Pavoflex 300x400 mm Dim. 127 x 71 x h 38 mm Vol: ~ 200 ml 9 indents Cutter included.

Pavoni - Silicone Mould Queen KE018 SIZE: OUTSIDE mm 180 INSIDE mm 52 H. 57 mm Vol. 1000 ml Silicone baking supplies from Pavoni combine the ease of baking in flexible non-stick bakeware, with chic Italian design. Introducing the Pavocake range of Pavoni Silicone Baking Pans and Molds, these pans are great for cakes, ice creams, jellied desserts and more. These pans are freezer, microwave and oven safe, temperature resistant up to 536 degrees, and you can even wash them in the dishwasher. Pavoni silicone baking supplies won’t pick up residual odors or tastes from other foods, and their flexibility makes these pans so easy to clean, and to store. Non-stick with slick upper for easy removal of food and little cleaning Pliable for pushing out pastry product or peeling sheet off frozen food product Safe in convection ovens, static ovens and microwaves Resistant to cold (-40C / -40F) and heat (280C / 536F) To clean a Pavoflex mold after use, rinse with hot water. If the mold is dirty, rub with soft sponge and mild soap (like the liquid kind used on dishes). To sanitize the mold, leave in oven for two minutes at 150C (302F).

XF16 MONOPORTION TRIANGULAR MICRO PERFORATED BANDS New Progetto Crostate shapes! The concept starts with the creation of a mix of equipment to allow the chef to obtain tarts with perfect finishing; the key product of this system are the micro perforated stainless steel frames: the micro holes let the shortcrust pastry to hang onto the frame, avoiding the border collapsing during baking and a perfect browning of the basis. Dim. 73 X 73 x 73 mm. h 20 mm

XF11 Pavoni - MONOPORTION OVAL MICRO PERFORATED BANDS 53 x 98,5MM - PROGETTO CROSTATE MORE INFO New Progetto Crostate shapes! The concept starts with the creation of a mix of equipment to allow the chef to obtain tarts with perfect finishing; the key product of this system are the micro perforated stainless steel frames: the micro holes let the shortcrust pastry to hang onto the frame, avoiding the border collapsing during baking and a perfect browning of the basis. Dim. 53 x 98,5 x h 20 mm

XF13 MONOPORTION RECTANGULAR MICRO PERFORATED BANDS New Progetto Crostate shapes! The concept starts with the creation of a mix of equipment to allow the chef to obtain tarts with perfect finishing; the key product of this system are the micro perforated stainless steel frames: the micro holes let the shortcrust pastry to hang onto the frame, avoiding the border collapsing during baking and a perfect browning of the basis. Dim. 88 x 46 x h 20 mm

Pavoni Top Decoration Silicone IPNOSI Mold, 140mm Dia. x 10mm H, 2 Cavities Each Cavity: 125 ml (4.23 oz) Overall Size: 175mm x 300mm Silicone mold to garnish & decorate your pastries and deserts, giving them volume and texture in the upper part. Non-stick with slick upper for easy removal of food and little cleaning Pliable for pushing out pastry product or peeling sheet off frozen food product Safe in convection ovens, static ovens and microwaves Resistant to cold (-40C / -40F) and heat (280C / 536F) To clean the mold after use, rinse with hot water. If the mold is dirty, rub with soft sponge and mild soap (like the liquid kind used on dishes). To sanitize the mold, leave in oven for two minutes at 150C (302F).

In the late 1980s, Walter Fortunato designed and built the stopper sealing system that has made Waf famous throughout the world. The Block Waf System© still represents the most ingenious invention for preserving the precious characteristics of newly uncorked sparkling wines over time.

The patent, applied in many items in the stoppers line, follows Pascal's principle that pressure exerted on a fluid is transmitted in all directions with equal intensity. By applying Pascal's principle to the bottle, the elastic teat goes to adhere to the inner wall of the mouthpiece. The head gasket with which the teat is fitted tends to rest against the top edge of the bottle, creating an initial obstacle to the escape of carbon dioxide. The carbon dioxide, again due to Pascal's principle, enters the teat through the hole below and as the pressure increases it goes to expand against the glass wall thus creating a state of overpressure inside. The external fixing bracket is designed to counteract the vertical thrust that the stopper receives and thus ensures its tightness, which has been tested up to 6 atmospheres.

Waf - Champagne stopper

The classic never wanes. It is perhaps the bartender's best partner when it comes to reliability and safety. Practical and ergonomic it allows one-handed opening and closing of the bottle.

Equipped with -Block WAF SYSTEM © with certified seal over 6 ATM.

MATERIAL: High-carbon chrome-plated steel.

Plastics certified for food contact.

COLOR: CHROMEPLATED

DIMENSION: 4.5 x 4.0 x 6.2 cm

WASHING: by hand, do not use abrasive sponges and/or detergents.

Nasce Sweetable by Pavoni, la nuova linea di alzate in diverse tipologie! Realizzate con materiale altamente resistente, di altissima qualità, le alzate Sweetable conferiranno un tocco di eleganza alla vostra tavola e lustro alle vostre creazioni! Completano la linea coltello, paletta e vassoi prodotti nel medesimo materiale. Questa alzata per torte è perfetta per presentare i vostri dolci in ogni occasione. Non solo wedding per una sweetable da sogno… eppur facile da realizzare! Il gioco di contrasti cromatici rendono la presentazione delle vostre creazioni alquanto sofisticata e di grande effetto! Utilizzate le alzate bianche enfatizzare questo mix di colori. Alzata in bianca Ideale per wedding cake oppure 10 cupcake.

Una nuova linea di stampi da cottura e surgelazione firmati PAVONIDEA®: “Fette in Casa” soddisfa il desiderio di personalizzare i propri dolci e salati decorandoli come più si preferisce. Ogni soggetto suggerisce due tipologie di decorazione: ogni fetta ha la stessa sagoma, ma ci si può sbizzarrire a decorare come più ci stimola l’immaginazione. Le alette danno sostegno e rigidità allo stampo e garantiscono risultati ottimali. Gli stampi sono in 100% silicone platinico e possono essere lavati tranquillamente in lavastoviglie. Solo al primo utilizzo si consiglia di imburrare leggermente lo stampo. REGISTERED DESIGN. Dim. 240 x 102 x 80 mm.

Pavoni - Silicone mold PUFFY KE029

"Chocolate and artistic sugar are two passions, I would say almost two diseases, chocolate is the one that has the most commercial implications, but even artistic sugar is growing a lot in recent times, and it gives me great satisfaction."

Italian pastry champion in 2010, Emmanuele Forcone was vice-champion at the Coupe du Monde de la Patisserie in 2011.

Executive pastry chef of the Pannamore pastry shop in Vasto, he has been in Australia several times to bring Italian confectionery to the world, and in the course of the years he specialized in chocolate and artistic sugar.

In 2015 he won the highest podium of the Coupe du Monde de la Patisserie in Lyon and since then he has worked closely with Pavoni Italia on several lines, including "Emmanuele's cakes" "TuttiFrutti" and the new range of colors.

New silicone pastry molds which will help you in making spectacular dessert with a peculiar 3D effect studied by the World Pastry Champion Emmanuele Forcone.

mm Ø 180 x 55 H

Vol: ~ 1000 ml.

Cookie cutters with extractor4 pcs. 60 mm. A nice set consisting of cutters for creating cookies in the shape of small vehicles: they are for shortbreads but also for the sugar paste. .

Pavoni - Silicone Mould Royal KE019 Ø est. 180 mm. Ø int. 61 mm. H mm 57. Vol. 1000 ml Silicone baking supplies from Pavoni combine the ease of baking in flexible non-stick bakeware, with chic Italian design. Introducing the Pavocake range of Pavoni Silicone Baking Pans and Molds, these pans are great for cakes, ice creams, jellied desserts and more. These pans are freezer, microwave and oven safe, temperature resistant up to 536 degrees, and you can even wash them in the dishwasher. Pavoni silicone baking supplies won’t pick up residual odors or tastes from other foods, and their flexibility makes these pans so easy to clean, and to store. Non-stick with slick upper for easy removal of food and little cleaning Pliable for pushing out pastry product or peeling sheet off frozen food product Safe in convection ovens, static ovens and microwaves Resistant to cold (-40C / -40F) and heat (280C / 536F) To clean a Pavoflex mold after use, rinse with hot water. If the mold is dirty, rub with soft sponge and mild soap (like the liquid kind used on dishes). To sanitize the mold, leave in oven for two minutes at 150C (302F).

Pavoni - Microperforated stainless steel oval single-portion band - Dim. 90 X 60 X H 20 mm - PROGETTO CROSTATE

Pavoni and Gianluca Fusto present the innovative PROGETTO CROSTATE, a new way to conceive the tart. THE TART BECOMES A WORK OF ART.

From an idea of 2007 by Fabrice David, Pavoni and the master Gianluca Fusto have been able to develop a system to easily realize tarts impeccable to the palate and to the sight.

The innovative idea was born to create a mix of equipments that can allow to obtain perfect finished tarts.

The stainless steel microperforated band by Pavoni is the leading product of this project. The presence of microholes allows to support the edges of the pie avoiding the collapse of the edges during cooking and an optimal browning of the bottoms.

Today the line Progetto Crostate by Gianluca Fusto is enriched, a perfect mix of equipments able to realize tarts with impeccable taste and sight. Many new shapes and sizes for single tarts: heart, circle and oval, triangle, rectangle and square.

A wide mix of micro-perforated strips for impeccable baking of the pastry and full strips for perfectly compatible layers and inserts.

XF12SINGLE OVAL MICROPERFORATED STAINLESS STEEL BAND

New shapes complete the already wide range of Progetto Crostate! The idea is to create a mix of equipment that makes it possible to obtain perfectly finished tarts; the top product of this system are the microperforated stainless steel bands: the microholes allow supporting the edge of the cake, preventing it from collapsing during cooking, and optimal browning of the bottoms.

Dim. 90 x 60 x h 20 mm

For further information on available sizes, please contact [email protected]

Pavoni - Silikonbackform - FOREST - Von Frank Haasnoot - Gebäck

Completely reinvent the buche de Noel!

Take a look at the modern take on a tradition cake with Forest, a design developed in collaboration with World Chocolate Master Frank Haasnoot, for yule logs full of elegance and creativity, to be reinterpreted with your own style.

 

Discover the innovation of tradition with Forest, developed in collaboration with World Chocolate Master Frank Haasnoot, full of elegance and creativity! Reinvent the classic cake with a 3D machined hole with a unique design, to be enhanced even more, according to your style, with creative decorations and precious finishes.

Pavoni - Silicone cake mould - FOREST - By Frank Haasnoot - pastry

Pavoni's Pavocake line Material: 100% platinum silicone

Suitable for use in blast chiller, freezer, microwave (no crisp), electric and gas oven Temperature range: from -40°C to +280°C

Dimensions: 25 x 9.7 cm H 9.5 cm

Volume: 1065 ml.

Venatore Pavoni FK022

in silicone a forma di Stella di Natale con tagliapasta in metallo.

Il set comprende 2 venatori in silcone + 1 coppapasta in metallo.

Dimensioni: Foglia 7 x 5,5 cm.

Cutter 6,5 x 5 cm

Venatore Pavoni FK018 in silicone a forma di foglia di agrifoglio con tagliapasta in metallo.
Il set comprende 4 venatori in silcone + 2 coppapasta in metallo. Dimensioni: Foglie 6 x 3 cm e 4 x 2 cm, Cutter in metallo 5 x 2 cm e 3.5 x 1.8 cm.

Pavoni - Silicone snack mold - Delicius Snack - DS02 Silicone moulds to create thousand precious and creative snacks, sweet or salty. Under the chocolate covering, you can add different fillings and tasty stuffings. Perfect in the oven, in the refrigerator and blast chiller (they withstand temperatures from -40° to +280°C). Dim. 90x30x19 h mm 15 Shapes Temperature range: from -40 ° C to + 280 ° C Number of cavities: 15 Cavity dimensions: 9 x 3 x H 1.9 cm Dimensions of the mold: 28.5 x 17.5 cm Material: silicone

Pavoni Top Decoration Silicone IPNOSI Mold, 60mm Dia. x 10mm H, 8 Cavities Each Cavity: 30 ml (1.01 oz) Overall Size: 175mm x 300mm Silicone mold to garnish & decorate your pastries and deserts, giving them volume and texture in the upper part. Non-stick with slick upper for easy removal of food and little cleaning Pliable for pushing out pastry product or peeling sheet off frozen food product Safe in convection ovens, static ovens and microwaves Resistant to cold (-40C / -40F) and heat (280C / 536F) To clean the mold after use, rinse with hot water. If the mold is dirty, rub with soft sponge and mild soap (like the liquid kind used on dishes). To sanitize the mold, leave in oven for two minutes at 150C (302F).

LED LAMPSHADE PORTABLE AND RECHARGEABLE- LIGHT -

ONE-LIGHT is an 'outdoor, in-door' portable and rechargeable, which can be the neck of a bottle.

NOVELTY One-Light is a portable and rechargeable 'outdoor, in-door' LED lampshade that can be easily accommodated on the neck of a bottle.

On the coffee table of a restaurant or bar, in a living room, in a studio to illuminate shady areas, -ONE-LIGHT can become a furnishing accessory that is impossible to resist.

An essential and modern design, it fits perfectly into any environment.

Features:

USB cable included for charging the lamp.

ONE-LIGHT conveniently recharges with any battery charger.

Charging time: 5-6 hours.

Material: Matt painted aluminium alloy body

COLOURS: BRONZE OR BLACK

DIMENSIONS: Ø 103 mm x 88 mm x Ø 77 mm .