collection knives
-
Benchmade - Skirmish 630 Titanium - NOS FULL SET from a PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) conditionBM-630-CP -
Puma - Cougar '80s Vintage NOS Full Set - 154CM & Jacaranda Wood - 12 6500 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM).
Intended Use: Collection / Vintage / Tactical
Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand newPU-COUJHW-CP€901.64Only 1 left -
Fox - Forest outdoor knife 576PKD - damascus blade - cocobolo - PRIVATE COLLECTION - Limited Edition
Vintage Fox collector's knife from Maniago - Limited Edition 1997
We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.
Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.Intended use: Collection
Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -FX-576PKD -
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
Wander Tactical - One of a Kind FC WT Knife - Primitive D2 & Leather - Custom Knife
Spectacular one-of-a-kind, specially made for Coltelleria Collini, reminiscent of primitive knives made of obsidian. The blade is masterfully handcrafted faceted and the handle is made of hand woven leather and leather.
The scabbard is made of thermoformed kydex to which soft, fine brown greased leather has been applied externally.
It is completed by the beautiful, entirely handcrafted wooden box with engraved Wander Tactical logos and runes, with the inner part that holds the knife made of handcrafted leather.
Intended Use: CollectionType of production: Handcrafted - one-of-a-kind
Country of production: Italy
Blade: ** unsharpened ** made of D2 steel at 59/60HRC
Blade treatment: primitive, reminiscent of prehistoric obsidian knives
Handle: leather and leather
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: backward
Weight: 166g.
Scabbard: kydex, with handcrafted leather outer cover
Packaging: antiqued wooden box, with engraved logos and runes and handcrafted leather interior
Notes: unsharpened knifeWT-FCWT -
Fox - Jupiter - Acid Stonewash M390 - Titanium & Jungle Wear Carbon Fiber - FX-555TiCF - knife
The Jupiter folder represents the culmination of the evolution of the locking system already used on the well-known Radius and Saturn, compared to which it gains a new safety lock that allows the blade to inhibit rotation in both the open and closed positions.
The design takes up the salient features of the two previous models, managing to integrate even better the round element that houses the mechanics. The blade, devoted to maximum practicality, makes the Jupiter the ideal companion in both urban and woodland environments: the tip is sturdy, while the cutting edge has a smooth, steady curvature that is fully usable and easily resharpened.
The handle shines in ergonomics, featuring a wide recess for the index finger and generous space for the other fingers.
Intended Use: Sporting/Collection
Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel M390 59/61 HRC
Blade treatment: Acid Stonewash
Handle: sandblasted titanium with "Jungle Wear" green carbon fiber inserts
Blade length: 78mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 195mm.
Weight: 148g.
Closure: Fingers Safe Opening System
Clip: Titanium, machined from billet
Packaging: cardboard box, drawer-style, with Fox Knives logos - leather sheath, hydroformed, belt
Notes: Design by Denis SimonuttiFX-555TICF -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
ExtremaRatio - Misericordia Ranger - XXV Anniversarium Limited Edition - knife
Extrema Ratio Misericordia Ranger XXV Anniversarium Limited Edition is a limited series version of only 400 pieces that preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment.
Misericordia Ranger XXV Anniversarium Limited Edition comes with 2 sheaths, both in desert color: the first, produced in kydex, offers the possibility of attachment via belt-clip, ulti-clip and malice-clip (optional accessories not included with the product). Attachment to the M.O.L.L.E. system by braiding the paracord is also possible. The second, made of high-strength Nylon, has 2 adjustable loops that allow it to be attached to M.O.L.L.E. systems.
Intended Use: Tactical/Multi-role
Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Geotech Camo (Black Warfare)
Handle: FRN (fiberglass reinforced Nylon) with skull crasher / rear glass breaker
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 233mm.
Weight: 87g.
Sheath: double sheath: Kydex and ABS.
Packaging: polypropylene case with Misericordia / Extrema Ratio logos and commemorative Coin
Notes: Limited edition of only 400 pieces, numbered on box and blade to celebrate the company's 25th anniversaryER-MIS-RALE -
Medford Knife and Tool - Swift FL Flipper - S35VN Tumbled DP Blade, Green Handle - MKFF206 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting
Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MKFF206STD -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Leather - SB54DEBKLTBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.SB54DEBKLTBK -
Maserin - AM-6 - D2 Titanium Framelock and G10 Black by Attilio Morotti - 374/G10N - knife
Intended use: Collection / Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: D2 58/61HRC steel
Blade finish: satin-finished
Handle: G10 and anodised titanium
Blade length: 93mm.
Blade thickness: 3.8mm.
Length closed: 122mm.
Total length: 215mm.
Thickness when closed: 10mm.
Weight: 88g.
Closure: Frame Lock with removable stainless steel hinge
Clip: Inoz steel, removable, placed on the back of the knife
Notes: Ball bearing opening movement - Design by Attilio "Atti" ConsoliMA-374/G10N -
Maserin - AM-6 - D2 Titanium Framelock by Attilio Morotti - 374/TT - knife
Intended use: Collection / Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: D2 58/61HRC steel
Blade finish: satin-finished
Handle: titanium, with anodised screws
Blade length: 93mm.
Blade thickness: 3.8mm.
Length closed: 122mm.
Total length: 215mm.
Thickness when closed: 10mm.
Weight: 94g.
Closure: Frame Lock with removable stainless steel hinge
Clip: Inoz steel, removable, placed on the back of the knife
Notes: Ball bearing opening movement - Design by Attilio "Atti" ConsoliMA-374/TT -
Fox - Yaru by Vox - Special Edition In SanMai SPG2 Steel - Space Coral Carbon Fiber - CO-527CF - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process.
Intended Use: Sporting / CollectionProduction type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-527CF -
Boker - Kalashnikov AK-47 Damascus by Chad Nichols - 11KAL48DAM - knife
In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design with a gas-pressure magazine with a swivel-head breech, the consistent use of stamped plates that could be produced quickly and cheaply, and the adherence to a class of cartridges introduced by the Wehrmacht with the StG 44 with an average performance between machine gun and rifle ammunition set the trend to this day. These characteristics have made the Kalashnikov system the most built and replicated weapon in history, with an estimated 100 million manufactured worldwide.
Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as cutting weapons, to a short, mountable knife with insulated shears and a multifunctional rear saw.
Mikhail Kalashnikov personally visited the Boker manufacture in Solingen in 2002 and officially introduced the Boker Kalashnikov knife line to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honor its brilliant engineering achievement. The Boker Kalashnikov Bayonet Damascus features a unique Damascus steel blade, made from 6Ch3 and 6Ch4 bayonet steel according to the GRAU index of the former Soviet Army and decorated with General Kalashnikov's signature. The stainless Damascus, handcrafted by Chad Nichols, has 80 layers and is hand forged in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process.
The handle is CNC machined from a block of 6061-T6 aluminum and then black anodized. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the wood in the stock of the famous assault rifle, and together they form the shape of the characteristic vents on the fore-end. The Russian amber shellac color of the original stocks has been accurately reproduced. They are also CNC milled from solid and inserted by hand. All screws and clip are also black anodized. Made in the Boker knife factory in Solingen, it is delivered with transparent floating display, certificate of authenticity and individual serial number.
Intended Use: CollectionType of production: Semi - Industrial
Country of Production: Germany - Solingen
Blade: 80 ply stainless damask steel, handcrafted by Chad Nichols, from former Soviet Army 6Ch3 and 6Ch4 bayonets
Handle: aluminum 6061-T6 and hornbeam wood
Blade length: 96mm.
Blade thickness: 3.8mm.
Total length: 228mm.
Weight: 158g.
Clip: removable, PVD stainless steel.
Closure: Liner Lock
Package: PVC expositive case that let the knife "float" inside, making it visible from every side
Notes: Certificate of Guarantee - Grey cotton case - Numbered piece on the bladeBO-11KAL48DAM -
Fox - Yaru by Vox - S90V PVD Stonewashed - FX-527TIPVD - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade Treatment: PVD Stonewashed
Handle: Titanium PVD Stonewashed and screws in titanium anodized bronze
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel knocker
Clip: Bronze anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper VoxnaesFX-527TIPVD -
Fox - Yaru by Vox - S90V Blue Titanium - FX-527TI - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade Treatment: Acid Stonewashed
Handle and Hardware: Titanium anodized HDL
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 105g.
Closure: Frame Lock with stainless steel hinge
Clip: HDL anodized Titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper VoxnaesFX-527TI -
Fox - Yaru by Vox - S90V Space Coral Carbon Fiber - FX-527CF - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S90V 59/61HRC
Blade treatment: PVD Stonewashed
Handle: "Space Coral" carbon fiber, Stonewashed PVD Titanium Frame and Hardware
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Pouch with Zip
Package: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper VoxnaesFX-527CF -
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
Ka-Bar - USMC Commemorative Presentation Grade Fighting Knife - 1215 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / MilitaryBlade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1215 -
Rockstead - Chou knife HPC Red Silk - USED - Neck Knife - Knife
Withdrawn knife from a private collection - Used, globally in good condition. Scratches on the blade - Checked, sharpened and certified by our internal laboratory Collini Cutlery.
Blade: Hitachi YXR7 65HRC steel with HPC treatment
Handle: hand-tied weave
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: from the neck, in Kydex
Notes: Accompanied by silk bag and warranty certificate with technical specificationsWith the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
RO-CHU-U -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-B -
HTM Knives - Grady Burrell - GBMP1 Black - Tactical Fixed Blade
Blade: 61HRC 154CM Stainless Steel
Handle: 3D Carved G10
Blade Length: 102mm.
Blade Thickness: 4mm.
Overall Length: 234mm.
Weight: 145g.
Lock: -
Clip: -
Sheath: Nylon with MOLLE System
Notes: Design by Grady Burrell10840Special Price €180.33 Regular Price €204.92Only 1 left -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - Black RWL34 - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9005 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Randall Knives - Model 19-4 - Bushmate Stag Horn - PRIVATE COLLECTION - knife
This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-194SH -
Wander Tactical - One of a Kind Dagger - Unsharpened - Ice Brush & Micarta Black - Custom Knife
Intended Use: Collection
Type of production: Handcrafted - one of a kind
Country of Production: Italy
Blade: ** NOT SHARPENED ** steel D2 at 59/60HRC
Blade treatment: Ice Brush
Handle: Micarta
Blade length: 170mm.
Blade thickness: 5.5mm.
Total length: 298mm.
Balance: advanced
Weight: 332g.
Sheath: kydex, multi-position, with MOLLE-compatible belt hooks
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: unsharpened knife, free sale and free possessionWT-DAIB-BK -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Wander Tactical - Tenebris Pilot Clip Point Knife - Ice Brush & Micarta Black - Custom Knife
Intended use: Collection
- Type of production: Handcrafted
- Country of production: Italy
- Blade: D2 steel at 59/60HRC
- Blade treatment: ICE BRUSH
- Handle: Micarta
- Blade length: 160mm
- Blade thickness: 5.5mm
- Total length: 275mm
- Balance: Advanced
- Weight: 330g
- Sheath: Kydex, multi-position, with MOLLE-compatible belt attachments
- Packaging: No packaging - supplied with Wander Tactical authenticity certificate and warranty
- Notes: -
WT-CPCP-BM -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Wander Tactical - Centuria Pilot Clip Point - Raw & Micarta Brown - Custom Knife
Intended Use: Collection
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: RAW
Handle: Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 275mm.
Balance: advanced
Weight: 330g.
Sheath: kydex, multi-position, with MOLLE-compatible belt hooks
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: -WT-CPCP-MB -
Boker - Vigtig Vs. Wild - 121509 - CPM-MagnaCut & Micarta - bushcraft knife
The steel chosen for the blade is Magnacut, which offers high toughness and tolerance to impact loads, despite its high chromium content of 10.7% and impressive hardness of over 62-63 HRC.
The handles are slightly flatter than the original Vigtig, and instead of the hollow studs, the two large screws can be easily removed with the help of a coin, revealing a large compartment with a depth of 14 mm compared to the outer dimensions of the handle, where tweezers, tinder, charcoal tablets, a fishing kit and safety pins, for example, can be easily housed. Even as a skeleton knife without handles, the Boker Vigtig vs. Wild, manufactured entirely in Solingen, makes a fine impression and underscores the versatility of this special model. It comes complete with a compact black Kydex sheath with clip.
Intended use: outdoor / Utility
Production type: Industrial
Country of manufacture: Germany
Blade: full tang in MagnaCut 62/63HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 150g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: design by Dave WengerBO-121509 -
Microtech - Currahee - S/E Green 102-1GR - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory
Intended Use: Heavy Utility
Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand newMCT1021GR -
Medford Knife and Tool - Praetorian Genesis T - S45VN Tumbled DP, Blue Warp Speed Handles - MK0294 - knife
Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it...so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring off the fearful, but still big enough for any task!
Intended Use: Sporty / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Blue Anodized Titanium with "Silver Peaks Warp Speed" artwork
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: satin-finished titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0294TD -
Medford Knife and Tool - Praetorian Genesis T - S45VN Tumbled Tanto, Violet & Brushed Silver Handles - MK0294 - knife
Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it... so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring away the fearful, but still big enough for any task!
Intended Use: Sporty / EDC
Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Purple Anodized Titanium with "Brushed Silver Flat" artwork and flamed hardware
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0294TT -
Medford Knife and Tool - Micro Praetorian T - S45VN Vulcan DP, Bronze Stained Glass Handles - MK0084 - knife
The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.
Intended Use: Sporting / EDC
Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Vulcan DP PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and bronzed hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0084VD -
Medford Knife and Tool - Micro Praetorian T - S45VN Tanto PVD, Bronze Stained Glass Handles - MK0084 - knife
The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.
Intended Use: Sporting / EDC
Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Black PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and PVD hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0084PT -
Medford Knife and Tool - Theseus - D2 Tumbled Blade, Violet Handles - MK040 - knife
The Theseus, named after the hero who defeated the Minotaur in ancient Greek mythology, is constructed in true Medford style. It features a tumbled D2 steel blade with stepped thumb groove and extended tang to facilitate quick one-handed use. A massive titanium handle with stainless steel spacer with lanyard hole and a unique pocket clip machined from billet complete the job.
Intended Use: Sporty
Type of production: Mid-Tech
Country of manufacture: USA
Blade: D2 steel
Blade finish: Tumbled & Satin
Handle: anodized titanium with flamed hardware
Blade length: 95mm.
Blade thickness: 5.5mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 237g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK040DTQ -
Medford Knife and Tool - Smooth Criminal - S35VN Tumbled Blade, Red Handles - MK039 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting
Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK039STQ -
Medford Knife and Tool - Smooth Criminal - S35VN PVD Blade, Black Handles - MK039 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting/Tactical
Production Type: Mid-Tech
Country of Production: USA
Blade: stainless steel CPM-S35VN
Blade finish: PVD
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: PVD titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0394PQ -
Al-Mar - Sere IV SOF Attack 3004/A - De Oppresso Liber - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: tactical / collection
Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened boxAL-3004/A-CP -
Andre De Villiers ADV - Alpha-S Flipper Knife Laser Engraved - S35VN & G10 - knife
Intended use: collection/sporting
Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade finish: satin-finished
Handle: PVD titanium with G10 insert
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 150g.
Opening: Carson Flipper system on ball bearings
Closure: Button Lock with additional safety
Clip: titanium, laser engraved
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-AS-G10E -
Spartan Blades - Spartan-Ka-Bar - DLC MagnaCut & Black Kydex - SB54BKBKKYBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps in the hope of it becoming the standard weapon. In collaboration with the Marine Supply Department, the project was revised and the production of an improved combat and utility knife began.
During the war, USMC KA-BAR knives became so renowned for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar joined forces with Spartan Blades to establish Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with enhanced strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specially designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: Tungsten DLC
Handle: Kraton G with stainless steel 301 guard and Tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -SB54BKBKKYBK -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Coyote Kydex - SB54DEBKKYTN - Knife
On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps, hoping it would become the standard weapon. In collaboration with the Marine Quartermaster Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq, and Afghanistan conflicts.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt desired a "KA-BAR" with enhanced durability, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries, specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -SB54DEBKKYTN -
Wander Tactical - Centuria Pilot Spear Knife - Rough - Micarta Brown - Custom Knife
Dino Picco, knifemaker and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with the iconic American combat knives of the Second World War.
Intended use: Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: RAW
Handle: Micarta
Blade length: 140mm.
Blade thickness: 5.5mm.
Total length: 275mm.
Balancing: advanced
Weight: 307g.
Sheath: in kydex, multiposition, with belt hooks and MOLLE compatible
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Note:WT-CE-S-MB -
Wander Tactical - Centuria - Comix Limited Edition - Custom Knife
Exclusive knife in entirely handmade "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.
"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:
Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.
Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.
Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.
Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.
Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.
Intended Use: Collection
Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: "Comix" coloring, entirely made and painted by hand
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 393g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - comes with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.WT-CE-CMX -
Ka-Bar - Vintage '80s - USMC Fighting Knife - 1217 - USATO - coltello
COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio internoIl KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzatoKB-US1217CP -
Wander Tactical - Centuria Drop - Marble & Micarta Green - fixed blade knife, single edge, made in Italy
Dino Picco, cutler and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with iconic American combat knives from World War II.
Intended Use: Collection
Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Marble
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5.5mm.
Total length: 280mm.
Balance: advanced
Weight: 313g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: -WT-CE-DR-MAMG -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Harold Corby - '80 Vintage Small Micarta Fighter - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory
Intended use: collection/tactical
Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collectionAP-CORBY -
Wander Tactical - Centuria Pilot clip knife - Raw - Micarta Brown - Custom knife
Dino Picco, knifemaker and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with the iconic American combat knives of the Second World War.
Intended use: Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: RAW
Handle: Micarta
Blade length: 140mm.
Blade thickness: 5.5mm.
Total length: 275mm.
Balancing: advanced
Weight: 307g.
Sheath: in kydex, multiposition, with belt hooks and MOLLE compatible
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Note:WT-CE-PI-MB -
Wander Tactical - Centuria Drop knife - Black Blood - Micarta Brown - Custom knife
Dino Picco, knifemaker and chief designer of Wander Tactical, created the Compact version of the Centuria model, fluidly combining the characteristic design of ancient Roman daggers with the iconic American combat knives of the Second World War.
Intended use: Collection
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Black Blood
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5.5mm.
Total length: 280mm.
Balancing: advanced
Weight: 313g.
Sheath: in kydex, multiposition, with belt hooks and MOLLE compatible
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Note:WT-CE-DR-BB-B -
Roberto Bernini - Fixed Hunter in Sambar Deer - PRIVATE COLLECTION - handcrafted hunting knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On commission
* Sharpening: Factory.
* Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
* Marks on handle: No.
* Packaging: Zip pouch, original
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel ATS-34 60HRC
Blade finish: satin finish
Handle: deer Sambar with stainless steel 416 guard
Blade length: 87mm.
Blade thickness: 4mm.
Total length: 198mm.
Weight: 80g.
Sheath: handcrafted, leather, for vertical belt carry
Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collectionAP-BER-HCV -
Davide Ceroni - Trinidad Scorpion Custom Bali - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collectionAP-CKTRSC -
Bark River - Bravo 1 Field Knife - Mil-Spec - Camo G-10 - COLLEZIONE PRIVATA - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: non più in produzione
* Affilatura: Di fabbrica
* Segni su lama: Leggeri
* Segni su impugnatura: No
* Scatola: Non presente
* Fodero: In Cuoio
* Manuali, Certificati e Garanzie: NO
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Tattico/Collezione
Tipo di produzione: Semi-Industriale
Paese di produzione: USA
Lama: in acciaio inox CPM-S35VN
Trattamento lama: satinatura
Manicatura: G-10 Camo
Lunghezza lama: 110mm.
Spessore lama: 5.5mm.
Lunghezza totale: 244mm.
Bilanciatura: arretrata di circa 2 cm dal bordo della guancetta
Peso: 240g. (350g. fodero compreso)
Fodero: In cuoio
Confezione: privo di scatola e certificati
Note: -AP-BRAVO1 -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
ExtremaRatio - Misericordia Black Warfare - XXV Anniversary Limited Edition - knife
Special limited edition model created on the occasion of the XXV Anniversary of Extrema Ratio
Extrema Ratio Misericordia Black Warfare is a version in a limited series of only 500 pieces that preserves intact all the features of the famous Misericordia model adopted by the 4th Alpine Parachute Regiment, which helped develop and test the product and chose it for its unique characteristics that make it particularly suitable for ambush combat.
The blade is milled from Böhler N690 steel, hardened to 58 HRC for the best balance of edge retention and strength, is 118mm long, 4mm thick, and has a flat edge. The weight of the knife is just 87g. It has a spear-point profile, with a full-length shank that makes it even lighter, features ¾-length false counter-wire, and has a Black Warfare finish, with the innovative and original Extrema Ratio Geotech Camo pattern, made by laser engraving.
The handle retains the unmistakable Extrema Ratio ergonomic profile, and is made of fiberglass-filled nylon to ensure absolute robustness in all conditions, even in the heaviest of uses. The distinctive ring on the bottom of the grip aids hand grip by allowing the soldier a greater and firmer lunge, exponentially increasing the combat potential of the Misericordia.
The Kydex scabbard offers belt-clip, ulti-clip and malice-clip attachment options. In addition, it is possible to attach the scabbard to the M.O.L.L.E. system by braiding the paracord lanyard. The Misericordia Black Warfare comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also the Kydex sheath, double UTLICLIP, double-grit sharpening plate (ceramic abrasive and synthetic diamond) and metal plaque with the progressive number of the limited series.
Intended Use: Tactical/Multi-role
Production Type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Geotech Camo (Black Warfare)
Handle: FRN (fiberglass reinforced Nylon) with rear skull crasher / glass breaker
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 233mm.
Weight: 87g.
Sheath: Kydex, with double multi-position ULTICLIP attachment clip
Packaging: polypropylene case with Extrema Ratio logos
Notes: Limited edition of only 500 pieces, numbered on box and blade to celebrate the company's XXV anniversaryER-MIS-BWLE -
CKF - Kadat Limited Edition by Alex Vorobyov - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, made in 2018 in only 300 pieces, individually numbered
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Original Nylon case with accessories.
* Scabbard: Not provided
* Manuals, Certificates and Warranties: Certificate with serial number and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: Russia
Blade: stainless steel M390
Blade treatment: Bkacwashed
Handle: bronze anodized titanium with carbon fiber inserts
Blade length: 111mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 250mm.
Thickness when closed: 13mm.
Weight: 167g.
Closure: Frame Lock
Clip: titanium machined from solid, with Timascus insert
Notes: knife from private collection, previously purchased, made in only 300 individually numbered examplesCKF-KAD-CP -
Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019CON-480 -
Ka-Bar - 6417 Red Spacer knife - 1095 steel - Special Edition - coltello
Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.
Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.
Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.
Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR
KB-6417 -
Guardian Tactical Usa - Deltrix Tactical Folder knife - PRIVATE COLLECTION - CF DK - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to 2015
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Guardian Tactical logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory100% USA Guardian Tactical, an American company specializing in the design and manufacture of tactical knives. Guardian Tactical combines obsessive and partly artisan attention with the use of modern and technologically advanced machinery in order to obtain almost perfect products with extremely high quality performance.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark StoneWash
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -AP-DeltrixDK -
Puma - Back Packer 465 knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory
Intended use: Collection / VintageType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knifePU-BP465 -
Rick Hinderer - XM-18 - Spanto 3.5" Gen II - Black + Desert G10 Scales - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: No
* Marks on handle: Small marks on hardware.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 3mm thick G10 black (+ one spare in desert color) on 1mm thick 6AL4V titanium liner. Frame in 4mm thick billet 6AL4V titanium with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 13mm.
Weight: 175g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: coyote paracord lanyard - second G10 scale, original Hinderer, in desert color - knife from private collection, previously purchased - product does not fall under "Loyalty" discountsXM18-CP -
Mikkel Willumsen - Custom Titanium Frame Lock - PRIVATE COLLECTION - handcrafted knife
Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition
* Commercially available Unique specimen made in 2008.
* Sharpening: Original, with a few small marks from use.
* Marks on blade: A couple of small marks.
* Marks on handle: A couple of small abrasions on titanium folder.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection
Production type: custom
Country of production: Denmark
Blade: handcrafted and beveled, stainless steel RWL-34
Blade treatment: dual tone: stone washed and handcrafted satin finish
Handle: micropallinated titanium and carbon fiber
Blade length: 107mm.
Blade thickness: 4mm.
Length closed: 137mm.
Total length: 245mm.
Thickness when closed: 15mm.
Weight: 215g.
Closure: Framelock
Clip: Removable, anodized titanium
Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing openingMW-CP -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
Cold Steel - Espada XL knife - PRIVATE COLLECTION - 62NX - knife
Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -AP-62NX -
Al-Mar - Vintage Fixed Sere IV 3004 Fighting Knife - PRIVATE COLLECTION - knife
Knife withdrawn from private collection, presumably from the first half of the 1980s - In excellent condition, with no particular scratches or signs of wear, still has the original factory sharpening - Rare version with micarta handle and engraved head " De Oppresso Liber", the famous motto of the American Green Berets - Original leather sheath in excellent condition, accompanied by original sharpening stone that finds its place in the special pocket - Checked and certified by our in-house laboratory.
Intended use: collectionType of manufacture: industrial
Blade: stainless steel AUS 8
Blade finish: satin finish
Country of manufacture: Seki - Japan
Handle: brown micarta
Blade length: 148mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: black leather, with sharpening stone
Notes: knife from a private collection from the first half of the 1980s, overall in very good conditionAL-3004-CP -
Othello Solingen Germany by Anton Wingen - Vintage Safari Hunting 4413 - knife
Othello Solingen Germany by Anton Wingen JR - famous brand in the 80s and 90s
Intended Use: Hunting
Type of production: handcrafted
Blade: 440 steel
Country of manufacture: Germany
Handle: deer
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 210g.
Sheath: Leather
Notes: 1980s vintage knife discontinuedoth4413€0.00Only -20 leftOut of stock