Coltelleria e illuminazione
-
Boker Plus - Undertow by Lorien Arnold - D2 & Black G10 - 01BO694 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Lorien Arnold - flipper opening system on ball bearingsBO-01BO694 -
Boker Plus - Makri by Kornel Kiss - 02BO089 - knife
The Zeitgeist is the sum total of those visions that are born in the present, shape an entire era, and are long gone by the creative minds that generated them. As a specialist in tactical and outdoor knives, Hungarian free spirit and knife maker Kornel Kiss regularly dares to look beyond the tip of his nose and, in the Boker Plus Makri, combines the elements of a practical EDC knife with the advantages of a Kukri blade, whose historical origins go back to Nepal.
Intended Use: UtilityProduction Type: Industrial
Country of manufacture: China
Blade: ful tang in D2 steel
Blade finish: Blacwashed
Handle: G10
Blade length: 71mm.
Blade thickness: 3mm.
Total length: 159mm.
Weight: 94g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kornel KissBO-02BO089 -
Boker Plus - Kaizen Flipper Knife - All Black G10 & S35VN - 01BO689 - knife
Intended Use: EDC / Sporty
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: Teflon coating
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO689 -
Boker Plus - Kaizen Flipper Knife - Gray G10 & Satin S35VN - 01BO678SOI - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO680SOI -
Boker Plus - Kaizen Flipper Knife - Gray G10 & Satin S35VN - 01BO678SOI - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO678SOI -
Boker - Mini Bronco 80CrV2 Bushcraft Knife - 121505 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -BO-121505 -
Boker Plus - Kihon DC GFN Knife - 01BO800 - Lucas Burnley - Folding Knife
The American custom knife maker Lucas Burnley embodies the concept of Japanese Kihon with the design of the Boker Plus Kihon DC. The term originally encompasses the fundamental principles and basic techniques of Japanese martial arts, which Burnley translates into practicality in the solid everyday pocket knife.
The features and linear design are evidence of a high level of practicality, providing the knife with a decisive price-performance advantage and an ideal basis for daily cutting tasks. The satin-finished drop-point blade made of D2 opens smoothly via the removable thumb stud thanks to the ball bearing, while the slide lock of the crossbar ensures intuitive, safe, and practical unlocking of the knife.
The non-slip handle with textured squares is made of high-strength GFN and fits comfortably in the hand. Orange anodized rings around the blade axle screw and the large handle screw give the Kihon a refined touch. Supplied with a lanyard hole and a convertible tip-up wire clip for flexible carrying options.
Intended use: EDC / Sporting
Production type: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: GFN
Blade length: 82mm.
Blade thickness: 3.2mm.
Overall length: 200mm.
Weight: 105g.
Clip: Steel, removable and reversible
Locking mechanism: Axis lock
Packaging: Cardboard box with Boker Plus logos
Notes:BO-01BO800 -
Boker Plus - Dvalin Folder Drop Knife - D2 - G10 Black - 01BO548 - knife
As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.
However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.
The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.
The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.
With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.
Intended use: Utility
Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -BO-01BO548 -
Boker Plus - Gemtek Knife - D2 - G10 - by A. De Santis - 01BO553 - knife
Rigorous efficiency or flexible dynamics? - A question that doesn't even arise for Alessandra de Santis's Boker Plus Gemtek. It can do both, not to mention the nuances in between. The designer from Hydra Design is known for her spirited creations with maximum functionality.
The Gemtek confidently joins this series and presents itself as a folding knife with a Frame Lock mechanism, featuring a Modified-Droppoint blade in high-performance D2 steel, which opens with a Flipper and impresses with its stonewash finish and a decorative false edge.
The handle front is made of gray G10, equipped with a discreet triangular texture for optimal grip. Carefully balanced elements such as the red spacers with an integrated loop and a G10 triangle on the back, reflecting the structure of the handle's front, elegantly complete the pocket knife's appearance.
The Tip-Up (r) clip allows for deep carry, ensuring the knife almost entirely disappears in the pants pocket. It comes with a high-quality nylon case for storage.
Intended use: Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 72mm.
Blade thickness: 3.7mm.
Total length: 176mm.
Weight: 132g.
Clip: removable stainless steel
Locking mechanism: Frame Lock
Packaging: nylon zippered case - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO553 -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
BlackFox - Artia by Grigorii Matveev - D2 Green G-10 - BF-765OD - knife
Intended Use: EDC / Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2 at 59/61HRC
Blade treatment: Stonewashed
Handle: G-10
Blade length: 93mm.
Blade thickness: 3.4mm.
Total length: 203mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-765OD -
BlackFox - Acutus by Grigorii Matveev - D2 Black G-10 - BF-764BB - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Black PTFE
Handle: G-10
Blade length: 90mm.
Blade thickness: 3.4mm.
Total length: 195mm.
Weight: 115g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-764BB -
BlackFox - Nix by Grigorii Matveev - D2 Orange G-10 - BF-763OR - couteau
Usage prévu : EDC / Sport
Type de production : Industriel
Pays de production : Chine
Lame : Acier à outils D2 à 59/61HRC
Traitement de la lame : PTFE noir
Manche : G-10
Longueur de la lame : 55mm.
Epaisseur de la lame : 3.5mm.
Longueur totale : 132mm.
Poids : 90g.
Clip : Acier inoxydable, amovible et réversible
Fermeture : Liner Lock
Emballage : boîte en carton avec les logos BlackFox
Notes : Design par Grigorii MatveevBF-763OR -
BlackFox - Nix by Grigorii Matveev - D2 Brown Micarta - BF-763 - knife
Intended Use: EDC / Sporty
Type of production: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total length: 132mm.
Weight: 90g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-763 -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Blue Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10CNBL -
Boker Plus - P51 Mustang Damascus by Steve Kelly - 01BO910DAM - knife
Timeless engineering and lived history! Inspired by a true air classic, Boker Plus presents the P-51 Damast by Steve Kelly as a designer knife with exceptional character. Based on the North American P-51 Mustang, the knife mirrors the material, shape and color of the 1940s fighter plane, creating almost a replica of its historic model.
Some 15,800 examples of this low-wing aircraft were produced in various versions between 1940 and 1948, making it still one of the most built military aircraft in the world today. The P-51 D is the most widespread series, with just under 8,000 examples. The special features of the P-51 Mustang, whose "P" in the name stands for Pursuit, lay in its full-metal aerodynamic construction with characteristic flared pins, which in combination with the massive Packard Merlin V-1650 engine allowed a top speed of 700 km/h with an extraordinary range of up to 3,300 km. These achievements were considered revolutionary at the time and led to the air supremacy of the United States Army Air Forces during World War II.
It was not only the unmistakable lines of the P-51 Mustang that prompted Boker's development department to undertake this exciting project. The challenge was to transfer the design language and performance of the combat aircraft into a knife without compromising elegance and practicality.
The heart of the Boker Plus P-51 Damast is its distinctive 80-ply Damascus spearhead blade, forged by Chad Nichols in the United States and composed of original parts from the historic fighter plane. Viewed from the side, the blade has a number of visual reminiscences of the historic fighter-bomber. The thumb hole, for example, is reminiscent of the Plexiglas cockpit canopy, which allowed the pilot an ideal all-around view.
Another prominent feature is the titanium handle, which mimics the aircraft's studded light metal plates to the smallest detail. The blue blade axis screw, which bears the U.S. Army Silver Star, and the red anodized screws, which echo the color scheme of the tail rudder, stand out.
Intended Use: Sporting/collection
Type of production: Industrial
Country of manufacture: Taiwan
Blade: Handcrafted 80-ply Damascus by Chad Nichols from original P51 Mustang parts
Blade Finish: -
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 193mm.
Weight: 10g.
Clip: titanium, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Carson Flipper-type opening system on ball bearings01BO910DAM -
BlackFox - Folding Rescue Knife - Red - BF-117 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: satin finish
Handle: Aluminium T6-6082 anodised red
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 169g. (204g. including sheath)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-117 -
BlackFox - Folding Rescue Knife - Black - BF-115 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: varnishing
Handle: G10
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 162g. (197g. including scabbard)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-115 -
Boker Plus - Kalashnikov AK101 2.0 Flipper - 01KAL105N - folding knife
ntended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Teflon coated
Handle: Aluminium
Blade length: 120mm.
Blade thickness: 3.5mm.
Total length: 250mm.
Weight: 202g.
Clip: Stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Kalashnikov logos
Notes: -BO-01KAL105N -
Boker Plus - Desertman - 12C27 Sandy Brown TPR - 02BO083 - fixed blade knife single edge
Intended Use: Outdoor / Bushcraft / Light Utility
Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -BO-02BO083 -
Boker Plus - Kaizen by Kansei Matsuno - Carbon Fiber & S35VN - 01BO383 - folding knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 47g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO383 -
Boker Plus - Epicenter - D2 Back Lock by Todd Rexford - 01BO545 - knife
With the Boker Plus Epicenter Backlock, U.S. designer Todd Rexford has created a knife of impressive proportions that combines the irrepressible forces of nature and unleashes an uncontrollable tremor in the center of knife enthusiasts' emotions.
With the yellow and black color combination of the all-G10 shaped handle, the Epicenter ranks right at the top of the Richter scale. Only the sturdy backlock can tame the elemental force this pocket knife can generate, securely locking the blade in place.
The brass lanyard hole and the ring on the blade axis screw add to the appeal of this natural phenomenon and inevitably make your hands shake.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3.7mm.
Length when closed: 120mm.
Total length: 210mm.
Weight: 130g.
Clip: stainless steel, removable
Closure: Back Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Todd RexfordBO-01BO545 -
Boker Arbolito - Folder Nahuel Guayacan Knife - 01BA004 - Knife
Nahuel means jaguar in the Mapuche language, the indigenous people of Argentina and Chile. Boker Arbolito's new folding knife design is equally robust and elegant. The main feature of this handle with linerlock block is the presence of light Guyacan ebony on both sides.
This gives the knife a nice feel and a warm look. Another eye-catching detail is the spacer, which is also made in Guyacan. The Böhler N678 stainless steel teardrop blade is easy to open via a flipper, which offers reliable finger protection when folded.
A deep pocket clip embedded in the wood allows for fold-down / right-handed carry.
Intended use: Hunting / Utility
Type of production: Industrial
Country of production: Argentina
Blade: N678Co 58HRC stainless steel ful tang
Blade finish: Satin
Handle: ebony
Blade length: 82mm.
Blade thickness: 3.38mm.
Total length: 200mm.
Weight: 151g.
Sheath: reversible clip
Packaging: cardboard box with Boker logos
Note: -BO-01BA004 -
Boker Plus - Exskelibur II - Framelock Micarta - 01BO367 - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Blackwash
Handle: Micarta and Blackwash Steel
Blade length: 71mm.
Blade thickness: 2.8mm.
Total length: 165mm.
Weight: 67g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: design by Mike SkellernBO-01BO367 -
Boker Plus - Nubilum Flipper Knife - 01BO492 - Carbon Fiber - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 91mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 132g.
Clip: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -BO-01BO492 -
Boker Plus - Baba Yaga Flipper by Keanu Alfaro - Green Micarta - 01BO386 - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel M390
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 2.3mm.
Total length: 167mm.
Weight: 75.5g.
Clip: Stainless steel billet, removable
Closure: Liner Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearingsBO-01BO386 -
Boker Plus - Micro Tracker Knife by Dave Wenger - 02BO076 - knife
The distinctive design, the Tracker concept with two separate blades, the impact-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made Dave Wenger's Boker Plus Mini Tracker a top seller in the bushcraft and outdoor scene. While the front of the larger Tracker variants is primarily suitable for chopping and splitting, the blade shape of the smaller size of the new Boker Plus Micro Tracker shows completely different advantages and qualities.
The Micro Tracker shares the benefits of two sharpening angles on one blade with its bigger brothers. Additionally, the front half of the blade in the smaller format is great for working on a chopping board and the sturdy tip is great for opening boxes in everyday use. The small nose, which separates the two grinds, pulls hard when cutting in soft materials and is predestined for cutting ropes, lines and belts.
The field and 3D archer appreciates the compact size, powerful point and archaic look when working out the wrong arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish as the Mini Tracker.
The three hollow brass studs carefully recessed and chamfered into the handle add visual flair. Supplied with a belt adapter and sheath
Intended use: Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: powder coat
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave WengerBO-02BO076 -
Boker Plus - LFL07 knife By Kansei Matsuno - 01BO387 - Carbon Fiber - folding knife
Sincerity, courage, and kindness are among the traditional basic virtues that still enjoy a high status in Japanese society today. Knifemaker Kansei Matsuno incorporates these values into the Boker Plus LFL07 and creates a noble gentleman's knife full of grace and style.
Featuring a CPM-S-35VN metallurgical powder hollow blade with a fine finish, the pocket knife tackles any cutting task sublimely.
The eye-catcher and visual highlight of the Boker Plus LFL07 is the grey-brown handle made of FAT carbon, which is interspersed with gold-colored nuances and consistently continues the fine line of the folding knife.
The reliably and harmoniously functioning stainless steel linerlock completes the overall look of the collector's knife, which is limited to 500 pieces in Europe.
The deep carry clip made of brushed stainless steel allows flip-up carry (r) and is functionally supported by the lanyard hole.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Taiwan
Blade: CPM S35VN stainless steel
Blade treatment: satin finish
Handle: Carbon Fiber
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 53g.
Clips: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno - Limited edition of 500 piecesBO-01BO387 -
Boker Plus - Dave Wenger Tracker knife - 02BO073 - knife
The Boker Plus Mini Tracker, designed by Dave Wenger, has quickly become a favorite in the bushcraft camping and dust scene, as a sturdy outdoor activity knife thanks to the massive 1095 carbon steel blade and corrosion resistant coating. The large Boker Plus Tracker is following in the footsteps of the small ... same materials, same features, but with unmatched performance! The massive survival knife blade features two different bevel surfaces, ideal for cutting, scraping, digging and prying. The optimal balance between the thickness, the length of the blade and the ergonomic shape of the finely worked micarta handle, allow you to work effortlessly even in extreme environments. The handle has three decorative brass hollow rivets, the back of which can be used as a lanyard hole. Supplied with a belt adapter and a custom made Kydex sheath.
Intended use: Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: a powder cover
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 469 g.
Sheath: in the Kydex
Packaging: cardboard box with Boker Plus logos
Note: design by Dave WengerBO-02BO073 -
Boker - Bronco bushcraft knife - BO121504 - knife
When Boker designed this Boker BRONCO fixed outdoor knife, it set ambitious goals;
- Universal and optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, hikers, hunters, SAR teams and others. - A CPM steel blade, a handle that fits comfortably in your hand even when working for long periods of time. A quality leather sheath that can be worn with or without a pendant. 100% production in Solingen / Germany
- The CPM-3V was developed by Crucible Industries LLC - a world leader in the 62-63 HRC sintered metallurgical steel market.
The universal wide point blade with high saber sharpening has always been the hunter's favorite shape for both large and small game and is suitable for both precision and heavier tasks. The tang is continuous and protrudes a few millimeters from the end of the handle. This ensures maximum stability and the tang can withstand even powerful blows with a log or other object.
TPE - thermoplastic elastomer - was chosen as the material of the handle, which completely encloses the tang and has a structure that guarantees a good grip in any load direction. TPE is strong, elastic, non-slip and has low thermal conductivity.
The knife features a leather sheath featuring a 9.3cm metal firelighter from market leader Light My Fire, which fits into a large, snug leather ring firmly integrated into the piping.
These features make the BRONCO Boker a tool for survival in an environment also of wild nature, compact, versatile and complete, at the height of any situation.
Intended use: UtilityType of production: Industrial
Country of production: Germany - Solingen
Blade: CPM 3V 62 / 63HRC ful tang
Blade finish: Satin
Handle: TPE
Blade length: 113mm.
Blade thickness: 3.4mm.
Total length: 230mm.
Weight: 147g.
Sheath: in leather, with flintlock
Packaging: cardboard box with Boker logos
Note:BO121504 -
Boker Plus - ME 109 Damast knife - 01BO909DAM - knife
The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.
The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.
The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.
Intended use: Sports / collection
Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings01BO909DAM -
Boker Plus - Vigtig bushcraft knife - 02BO075 - design Dave Wenger - fixed knife
Boker Plus - Vigtig bushcraft knife - 02BO075 - design Dave Wenger - fixed knife
Intended use: Outdoor / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Full tang 1095 Cro Van carbon steel
Blade finish: Powder coated
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 197mm.
Weight: 190g.
Sheath: kydex
Packaging: cardboard box with Boker Plus logo
Notes: design by Dave WengerBO-02BO075 -
Boker Plus - Koteyka Slipjoint by Alexander Krava - 01BO641- folding knife
Intended Use: Gentleman / EDC / Sporty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: G10
Blade length: 66mm.
Blade thickness: 2.7mm.
Length when closed: 92mm.
Total length: 158mm.
Weight: 49g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: Design by Alexander KravaBO-01BO641 -
Boker Plus - Evade by Serge Panchenko - 01BO384 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stonewashed stainless steel
Blade Length: 90mm.
Blade thickness: 3.3mm.
Length when closed: 121mm.
Total length: 211mm.
Weight: 167g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Serge PanchenkoBO-01BO384 -
Boker Plus - Aluma Flipper Folder by E. Manasherov - 01BO463 - knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade finish: stonewashed
Handle: aluminum with wood insert
Blade length: 91mm.
Blade thickness: 3.6mm.
Total length: 220mm.
Weight: 123g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Eran ManasherovBO-01BO463 -
Boker Plus - Connector Titan Knife - 01BO353 - folding knife
The practical Connector of Boker Plus bears the unmistakable signature of the Polish cutler Jakub Wieczorkiewicz, now known all over the world for the quality of his production. The Connector is equipped with a spear point blade, CPM-S-35VN steel, on ball bearings. Made with an excellently machined titanium handle.
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN steel
Blade treatment: satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 88g.
Clip: removable steel
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via ball bearing system - design by Jakub WieczorkiewiczBO-01BO353 -
Boker Plus - Aphex Mini knife by Burnley - 01BO197 - folding knife
The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.
Intended use: Collection
Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by BurnleyBO-01BO197 -
Boker Plus - Gulo Pro Marble Carbon Fiber - 01BO177 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Carbon Fiber, Titanium
Blade length: 84mm.
Blade thickness: 3.5mm.
Total length: 192mm.
Weight: 148g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Steve KellyBO-01BO177 -
Boker Plus - Wasabi Higonokami knife in damascus and titanium by Kansei Matsuno - 01BO634DAM - knife
Intended use: EDC / Sports / collection
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium
Blade length: 72mm.
Blade thickness: 2.1mm.
Total length: 176mm.
Weight: 56g.
Clip: removable, in titanium
Closure: -
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno01BO634DAM -
Boker Plus - LRF Damascus and Titanium by Kansei Matsuno - 01BO174DAM - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium
Blade length: 86mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 42g.
Clip: titanium
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno01BO174DAM -
Boker Plus - Nessmi Pro Black by Jesper Voxnaes - 02BO066 - knife
Intended Use: Outdoor / Light Utility
Production type: Industrial
Country of Production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: Micarta with copper rivets
Blade length: 70mm.
Blade thickness: 2.9mm.
Total length: 155mm.
Weight: 85g.
Sheath: leather
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes.BO-02BO066 -
Boker Plus - Hermod 2.0 by Midgards Messer - 02BO053 - knife
Designation of use: Utility
Production type: Industrial
Country of Production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 215mm.
Weight: 181g.
Scabbard: Kydex, with Tek-Lok type fitting
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Midgards MesserBO-02BO053 -
Boker Plus - Little Dvalin Drop Point - 02BO033 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: China
Blade: D2 steel ful tang
Blade finishing: Black PVD
Handle: G10
Blade length: 80mm.
Blade thickness: 5.7mm.
Total lenght: 166mm.
Weight: 157g.
Sheath: Kydex sheath with Tek-Lok attachment.
Package: cardboard box with Boker Plus logos
Notes: -BO-02BO033 -
Boker Plus - Mini Tracker by Dave Wenger - 02BO027 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: Taiwan
Blade: ful tang steel 1095
Blade finish: Powder coated
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 250mm.
Weight: 270g.
Sheath: Kydex
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Dave WengerBO-02BO027 -
Boker Plus - Kyoto Flipper Black G10 - 01BO241 - folding knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 61mm.
Blade thickness: 2.7mm.
Total length: 200mm.
Weight: 61g.
Clip: monolithic, titanium, removable
Closure: liner lock
Package: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings.BO-01BO241 -
Boker Plus - LRF G10 by Kansei Matsuno - 01BO078 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 54g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei MatsunoBO-01BO078 -
Boker Plus - Caracal by Boris Manasherov - 01BO771 - folding knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Taiwan
Blade: Steel D2
Blade treatment: stonewashed
Handle: steel liners and G10 grips
Blade length: 87mm.
Blade thickness: 3.5mm.
Overall length: 213mm.
Weight: 157g.
Clips: stainless steel, type deep pocket
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - opening system Carson FlipperBO-01BO771 -
Boker Plus - Urban Trapper by Brad Zinker - 01BO734 - folding knife
Intended Use: Gentleman / Sports
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless Steel VG-10
Blade treatment: satin finish
Handle: titanium frame with cocobolo grips
Blade length: 87mm.
Blade thickness: 2.5mm.
Overall length: 195mm.
Weight: 51g.
Clip: Titanium
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad ZinkerBO-01BO734 -
Boker - Vigtig Vs. Wild - 121509 - CPM-MagnaCut & Micarta - bushcraft knife
The steel chosen for the blade is Magnacut, which offers high toughness and tolerance to impact loads, despite its high chromium content of 10.7% and impressive hardness of over 62-63 HRC.
The handles are slightly flatter than the original Vigtig, and instead of the hollow studs, the two large screws can be easily removed with the help of a coin, revealing a large compartment with a depth of 14 mm compared to the outer dimensions of the handle, where tweezers, tinder, charcoal tablets, a fishing kit and safety pins, for example, can be easily housed. Even as a skeleton knife without handles, the Boker Vigtig vs. Wild, manufactured entirely in Solingen, makes a fine impression and underscores the versatility of this special model. It comes complete with a compact black Kydex sheath with clip.
Intended use: outdoor / Utility
Production type: Industrial
Country of manufacture: Germany
Blade: full tang in MagnaCut 62/63HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 150g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: design by Dave WengerBO-121509 -
Boker - Magnum 2023 Collection Limited Edition by Lucas Burnley - 02MAG2023 - knife
Magnum continues the tradition of its annual knives and presents the Collection 2023, a collector's knife with exceptional appeal. Passionate knife collectors around the world will once again be faced with the choice of whether the knife should find a place in the display case or on the belt. Lucas Burnley, considered one of the world's most renowned knife designers and who has already launched several successful knife series for Boker and Boker Plus, was won over for this special project. The knife maker from the U.S. state of Oregon knows how to combine clear lines and tactical influences in his designs like no other.
The Magnum Collection 2023 is an impressive full tang outdoor knife with a massive D2 blade that features a pronounced ricasso and an unusual two-tone finish. The designer alternates between a horizontal and vertical finish on the blade, which underscores the special appeal of the fixed-blade knife. Attention to detail also continues in the contoured handle with black polished Micarta grips that gives excellent user ergonomics for effortless work. Features include a high-quality leather sheath with two snap fasteners, an exclusive collector's box, and a certificate of authenticity. The Magnum Collection 2023 is strictly limited to 1999 pieces worldwide.
Intended Use: Collection/Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: full tang in D2 steel
Blade finish: dual tone
Handle: Micarta
Blade length: 174mm.
Blade thickness: 4.8mm.
Total length: 305mm.
Weight: 353g.
Sheath: black leather
Package: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Lucas BurnleyBO-02MAG2023 -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Bronze Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10DMBZ -
Boker - Magnum Collection 2005 - Limited Edition - 02MAG2005 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: light
* Marks on handle: light, on the guard
* Box: Original, with some marks
* Scabbard: Original, leather, with some small marks, also due to the insertion of the knife
* Manuals, Certificates and Warranties: Certificate present
* Checked and certified by our in-house laboratoryThis limited edition Magnum Tanto style piece is based on a historical Japanese samurai sword that was popular during the Heian period (794-1185). The modified dagger-style blade, based on a design by the legendary blacksmith Amakumi, refers to the period when samurai lived the 'bushido' or 'way of the warrior'. The shape of this blade is called Kissagi-moroha and is derived from the Kogarasu-maru sword. The material of the blade is 440A stainless steel with a rich two-tone finish. The traditional handle is combined with synthetic material simulating tsuka and ray skin; the Tsuba provides a secure grip. Supplied with a genuine leather sheath and presentation box. Limited to 1,999 pieces worldwide, each serialised.
Intended use: Collection / Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: Ful tang in 440A steel
Blade finish: satin finish/polishing
Handle: canvas and synthetic ray skin
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 300mm.
Weight: 271g.
Sheath: black leather
Packaging: case with certificate of guarantee
Notes: Numbered and limited edition of 1999 pieces - Serial Number 136AP-BO-02MAG2005 -
Boker Plus - Little Friend S35VN Flipper by Vox - 01BO385- knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4mm.
Length when closed: 108mm.
Total length: 188mm.
Weight: 135g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Jesper VoxnaesBO-01BO385 -
Boker - Magnum Collection 2022 - Limited Edition - 02MAG2022 - fixed knife
The various models of the Magnum Collection have been adorning the windows of countless knife enthusiasts for many years. This year's collector's knife was designed by Brian Efros of Colorado and combines well thought out construction with high quality materials and perfect workmanship. The full-time cutler has been designing and manufacturing his own knives since 2008 and is now known far beyond the country's borders. Full order booklets, perfect workmanship and individual implementation ensure that his hand-made pieces reach the best prices internationally.
The Magnum Collection 2022 is an outdoor knife with an extremely robust drop point blade in satin D2. The screwable titanium handguard and the pronounced indentation of the fingers prevent involuntary blade slipping and thus safety at work. The OD green grip scales of the full tang construction are made of textured micarta and are held in place by decorative titanium screws. The combination of ergonomic design and pleasing shape also offers an exceptionally fuller grip feel. This unique collector's knife is strictly limited to 1999 pieces worldwide. Comes with a high quality leather sheath in an exclusive collector's box and with a certificate of authenticity.
Intended use: Collection / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: full tang in D2 steel
Blade finish: satin finish
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4mm.
Total length: 237mm.
Weight: 191 g.
Sheath: in black leather
Packaging: gift box with guarantee certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copiesBO-02MAG2022 -
Boker - Barlow BFF by Lucas Burnley - 120506 - knife
Intended Use: Utility / Hunting
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang stainless steel AEB-L
Blade finish: Satin finish
Handle: Walnut Briar
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 153mm.
Weight: 65g.
Scabbard: leather, with clip attack
Package: cardboard box with Boker logos
Notes: Design by Lucas BurnleyBO-120506 -
Boker Plus - Epicenter by Todd Rexford - Collection 2021 - 01BO2021 - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 61HRC
Blade treatment: satin finish
Sleeve: Titanium and carbon fiber
Blade length: 88mm.
Blade thickness: 3.7mm.
Total length: 208mm.
Weight: 133g.
Clip: titanium, billet machined
Locking system: frame lock
Package: Cardboard box with Boker Plus logos, nylon pouch with zipper.
Notes: Design by Todd Rexford - Limited and numbered edition on box and blade.BO-01BO2021 -
Boker Plus - Wasabi Higonokami G10 by Kansei Matsuno - 01BO630 - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: satin finish
Handle: G10
Blade length: 72mm.
Blade thickness: 2.1mm.
Total length: 176mm.
Weight: 51g.
Clip: removable, steel
Locking mechanism: -
Package: cardboard box with Boker Plus logos
Notes: Design by Kansei MatsunoBO-01BO630 -
Boker Plus - Kaizen Flipper Green Micarta - 01BO391 - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: black coating
Handle: micarta
Blade length: 76mm.
Blade thickness: 1.9mm.
Total lenght: 180mm.
Weight: 44g.
Clip: stainless steel, removable
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon pouch with zipper
Notes: opening through "Minimalist Flipper" system on ball bearings.BO-01BO391 -
Boker Plus - Kaizen Flipper Black G10 - 01BO390 - folding knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening through "Minimalist Flipper" system.BO-01BO390 -
Boker - Magnum Collection 2021 - Limited Edition - 02MAG2021 - fixed knife
Intended Use: Collection / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: ful tang in D2 steel
Blade finish: Satin finish
Handle: Micarta
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 233g.
Sheath: Black leather
Package: gift box with certificate of guarantee and microfiber cleaning cloth.
Notes: Limited and numbered edition of 1999 pieces - Design by Jesper Voxnaes (Vox)BO-02MAG2021 -
Boker - Magnum Collection 2020 - Limited Edition - 02MAG2020 - knife
Intended use: Collection / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel D2
Blade finish: sandblasted
Handle: G10
Blade length: 173mm.
Blade thickness: 5mm.
Total length: 324mm.
Weight: 459g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copies - Design by Dietmar Pohl (Pohl Force)BO-02MAG2020 -
Spartan Blades - Oculus knife - Harsey Folder 2019 Special Edition - knife
Model winner of the 2016 Blade Show as "American Made Knife of the Year"
The model photographed is the Limited Edition 2019
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Intended use: Collection / Sports
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Washed
Handle: titanium 6AL-4V
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 125mm
Total length: 225mm.
Weight: 168g.
Closure: FrameLock
Clip: in anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey - 2019 limited edition anodized with engravingsSF5OCULUS -
Boker Plus - Warbird Flipper by Boris Manasherov - 01BO754 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: stonewash
Handle: G10
Blade length: 94mm.
Blade thickness: 3.5mm.
Total length: 225mm.
Weight: 132g.
Clip: stainless steel, deep pocket type, removable and reversible
Closure: SubFrame Lock in stainless steel
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - Carson Flipper opening system with movement on ball bearingsBO-01BO754 -
Spartan Blades - Spartan Harsey Folder - Black Logo Limited Edition - SF5S - Knife
Winner of the Blade Show 2016 as "American Made Knife of the Year"
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Black PVD 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: anodized titanium
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuidaSF5SPARTAN -
Spartan Blades - Spartan Harsey Folder - Bronze Helmet Limited Edition - SF5H - Knife
Winner of the Blade Show 2016 as "American Made Knife of the Year"
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Anodized 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuidaSF5HELMET -
Spartan Blades - Metis Flipper - SF4SWSW - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose of use: Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: stonewash
Manicure: Titanium 6AL-4V
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 100mm
Total Length: 170mm.
Weight: 81g.
Closure: FrameLock
Clip: Titanium 6AL-4V
Packing: Cardboard box with Spartan Blades logos
Notes: GTC Alpha Ball Bearing Opening - Carson Flipper System Opening - Design by Keith Edick and Curtis IovitoSF4SWSW -
Spartan Blades - Pallas - Drop Black PVD - SF3BK - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3BK -
Boker Plus - Colubris Knife by D.J. Urbanovsky - 02BO055 - fixed knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Taiwan
Blade: full tang, 440C steel
Blade treatment: stonewashed
Handle: G10 green
Blade length: 100mm.
Blade thickness: 5mm.
Overall length: 225mm.
Weight: 236g.
Sheath: Kydex with coupling type Tek-Lok
Packaging: cardboard box with Boker Plus logos
Notes: Design by D.J. UrbanovskyBO-02BO055 -
Boker Plus - Rold by Jesper Voxnaes - 02BO272 - knife
Use: Outdoor / Sports
Type of production: Industrial
Production Country: Taiwan
Blade: full tang, steel D2
Blade treatment: stonewashed
Handle: G10
Blade length: 157mm.
Blade thickness: 5mm.
Overall length: 280mm.
Weight: 293g.
Sheath: Kydex with coupling type Tek-Lok
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper VoxnæsBO-02BO272 -
Boker - Tirpitz Damascus - Limited Edition - 110190DAM - folding knife
Intended Use: Collection
Type of production: Industrial
Production Country: Germany
Blade: stainless Damascus steel 300 layers, from the German battleship Tirpitz was sunk 12 November 1944
Blade treatment: -
Handle: aluminum to silicon AlMgSi1 anodized in color navy blue and walnut inlay in German
Blade length: 100mm.
Blade thickness: 3.5mm.
Overall length: 230mm.
Weight: 165g.
Clip: reversible and removable, stainless steel
Lock: Liner Lock
Packaging: PVC box exhibition that leaves "float" the knife in it, making it visible from all sides
Notes: Certificate of warranty - Case in red cotton - Exemplary limited numbered edition on the handleBO-110190DAM -
Boker Arbolito - Hunter Stag - 02BA351H - hunting knife
Intended Use: Hunting / Sporting
Type of production: Industrial
Production Country: Argentina
Blade: N695Co stainless steel 58HRC
Blade treatment: satin finish
Handle: deer
Blade length: 120mm.
Blade thickness: 4mm.
Overall length: 245mm.
Weight: 220g.
Sheath: Brown leather
Packaging: cardboard box with logos Boker Arbolito
Notes: -BO-02BA351H