Coltelleria ed illuminazione
-
ESEE Knives - Esee 3P Desert MB-DE knife - knife
Intended use: Sports
Type of production: Industrial
Blade production: USA
Blade: 1095 carbon steel
Blade treatment: Textured powder coat
Handle: Desert Canvas Micarta
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Closing: -
Clip: -
Sheath: ABS and Nylon with additional clip for wearing on the belt
Packaging: Transparent plastic bag
Notes: Malice ClipsES-MB-DE -
Fox - Alaskan Hunter Fixed by Russ Kommer - FX-620B - knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Italy
Blade: in Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade Finish: Black Idroglider
Handle: G10
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 207g.
Sheath: leather, for vertical port
Packaging: Cardboard box with Fox logos
Notes: Design by Russ KommerFX-620B -
ExtremaRatio - Contact C Knife Ranger Green - tactical knife
Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced.
The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.
Intended use: Tactical / Backup
Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 373g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-CC-RG -
ExtremaRatio - Contact C Knife Black - tactical knife
Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced.
The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.
Intended use: Tactical / Backup
Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Mil-C-13924 burnishing
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 273g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-CC-BK -
Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
RAPTOR model:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in green kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT -
MKM & Mercury - Cellina Slipjoint by Burnley - Titanium and Micarta - MKMY02-GCT - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with eyelet, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin in blue anodized titanium, stainless steel spring.
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Sandblasted titanium and Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 101mm.
Total length: 173mm.
Thick when closed: 11mm.
Weight: 73g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Lucas Burnley - Knife produced by MercuryMKM-MY02-GCT -
MKM & Mercury - Cellina Slipjoint Knife by Burnley - Aluminum - MKMY02-A - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with eyelet, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin in blue anodized titanium, stainless steel spring.
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 101mm.
Total length: 173mm.
Thick when closed: 11mm.
Weight: 53g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Lucas Burnley - Knife produced by MercuryMKM-MY02-A -
MKM & Fox - JOUF Black Cerakote by Bob Terzuola - G10 - MK FX02-C - knife
Intended use: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: in N690 59 / 60HRC stainless steel
Blade treatment: black cerakote
Handle: black G10 grips
Blade length: 130mm.
Total length: 260mm.
Blade thickness: 5mm.
Weight: 230g.
Sheath: cordura sheath, MOLLE compatible
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Bob Terzuola - produced by FoxMK-FX02-C -
ExtremaRatio - Contact C Knife HCS - tactical knife
Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced.
The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.
Intended use: Tactical / Backup
Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 373g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-CC-HC -
Fox - Ferox Survival by Tommaso Rumici - FX-630B - knife
Intended use: Sports / Hiking
Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade finish: Black Idroglider
Handle: G10 with 9 rubber O-rings
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 149g.
Sheath: in kydex, Taco type, with multi-position Tek-Lok attachment
Packaging: Cardboard box with Fox logos
Notes: Design by Tommaso Rumici - Equipped with bit holder for screwdrivers, flat tip screwdriver, philips screwdriver - Rear carabinerFX-630B -
Fox - Geco Titanium Flipper Frame by Bastinelli - FX-537SW - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta and Titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 122mm.
Total length: 210mm.
Thick when closed: 13mm.
Weight: 124g.
Opening: through Carson-Flipper system
Washers: in steel, with ball bearings
Closing: Framelock, with removable stainless steel leaf
Clip: stainless steel, deep carry type
Packaging: Cardboard box with Fox FKMD logos; Nylon zip sheath
Notes: Design by Bastinelli KnivesFX-537SW -
Benchmade - Puukko knife - 200 - CPM-3V - fixed knife
Designed to handle all your adventures in the outdoors, the Puukko combines a classic Scandinavian silhouette with the modern performance you expect from a Benchmade. CPM-3V steel rewrote our standard for toughness, outperforming all other steels in our lineup. The rubberized Santoprene handle make for a comfortable and secure grip for a multitude of tasks. Even the sheath was created with versatility in mind, making it easy to carry with you. Whether it becomes your go to camp knife or your bushcrafting lifeline, the Puukko is made to handle any situation.
Intended use: Utility / Hiking
Type of production: Industrial
Blade production: USA
Blade: CPM-3V 60-62 HRC steel
Blade treatment: Satin
Handle: Santoprene
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 212mm.
Weight: 114g.
Sheath: leather
Packaging: Cardboard box with Benchmade logos
Note: -
Send feedback
History
SavedBM-200 -
Hollywood Collectibles Group - Rambo III knife - Knife
Intended use: Survival / Collection
Blade: 420J2 stainless steel
Lama production China
Handle: Wood
Blade length: 320mm.
Blade thickness: 5.5mm.
Length closed: -
Total length: 455mm.
Balancing: -
Weight: 922g.
Closing: -
Clip: -
Sheath: leather
Notes: Official reproduction under cinema license
Send feedback
History
Saved
CommunityRB9296 -
Hollywood Collectibles Group - Rambo II knife - First Blood Part 2 - Knife
Purpose of use: Survival / Collection
Blade: Stainless Steel 420J2
Manicure: Aluminum and Paracord
Blade Length: 255mm.
Blade thickness: 5.5mm.
Handle Length: 100mm.
Total Length: 395mm.
Balance: Advanced, 2cm. From the lower guard branch
Weight: 504g.
Closure: -
Clip: -
Sheath: in leather
Notes: Compass with survival kit in the handle, in the sheath.RB9294