Coltelleria ed illuminazione

An indispensable tool for maintenance of knife cutting edge.

Handle: synthetic material.
Total Length: 46 cm.
Length of abrasive element: 31 cm.
Weight: 494 gr.

Tips for knife maintenance

Appropriate maintenance extends the knife life, makes work easier and safer, and reduces wire consumption. Some advices:

- Be careful that the knives put into the dishwasher an urtin other objects; They could damage the blades.

- Dishwasher safe knives that are not immediately washed in the machine should be rinsed under the tap to remove the remains of highly corrosive foods (fat, vinegar, fruit juice).

- Make sure if the knives no longer cut to perfection, make them straighten or sharpen by professionals in the industry.

An indispensable tool for maintenance of knife cutting edge.

Diamond grain: to be used with care as being more "aggressive" than a regular steel rod. Ideal for restoring a particularly dull or damaged wire, we recommend a subsequent passage with a finer grain base.

Handle: synthetic material.
Total Length: 39 cm.
Length of abrasive element: 26 cm.
Weight: 270 gr.

Tips for knife maintenance

Appropriate maintenance extends the knife life, makes work easier and safer, and reduces wire consumption. Some advices:

- Be careful that the knives put into the dishwasher an urtin other objects; They could damage the blades.

- Dishwasher safe knives that are not immediately washed in the machine should be rinsed under the tap to remove the remains of highly corrosive foods (fat, vinegar, fruit juice).

- Make sure if the knives no longer cut to perfection, make them straighten or sharpen by professionals in the industry.

An indispensable tool for maintenance of knife cutting edge.

SUPER FINE:  ideal for frequent use (even whenever it is cut) on wires not particularly worn.

Handle: synthetic material.
Total Length: 46 cm.
Length of abrasive element: 31 cm.
Weight: 454 gr.

Tips for knife maintenance

Appropriate maintenance extends the knife life, makes work easier and safer, and reduces wire consumption. Some advices:

- Be careful that the knives put into the dishwasher an urtin other objects; They could damage the blades.

- Dishwasher safe knives that are not immediately washed in the machine should be rinsed under the tap to remove the remains of highly corrosive foods (fat, vinegar, fruit juice).

- Make sure if the knives no longer cut to perfection, make them straighten or sharpen by professionals in the industry.

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.

Purpose of use: Collection / Sportsman

Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 6.5mm.
Closed length: -
Total Length: 270mm.
Closure thickness: -
Balance: -
Weight: 384g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious prize at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory unsharpened / with dull edge; due to italians current regulations and law restrictions.

Purpose: collection

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: Satin
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: -
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Design by Hill Knives - blade with dull edge / unsharpened due to italian law restrictions

Use target: neck knife

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMD

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and anodized titanium
Blade Length: 85mm.
Blade thickness: 3.5mm.
Closed length: 115mm.
Total length: 195mm.
Closed thickness: 14mm.
Weight: 99g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion Steel

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: G10 and Titanium Darkwashed
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Closed thickness: 13mm.
Weight: 117g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Glass Breaker - Produced by Lion Steel

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Reload as a smartphone!
This torch is home to a rechargeable 18650 battery and is equipped with an innovative charging system with built-in USB / Micro USB plug.

Laboratory Potentials and Durability Standards from ANSI / NEMA FL1 Standard using 1x 18650 3.7V 3400mAh - under different conditions of use or using different batteries, the data may vary

Led: 1x Cree XP-L HI V3 - with a lifetime of 50,000 hours
Operating Modes: 7, electronically adjusted
Power and Duration: 1000 Lumens (1h and 15min.) -> 280 Lumens (6h) -> 55 Lumens (28h) -> 1 Lumens (520h.) -> Strobo -> SOS -> Location Beacon
Power peak: 25700 candles
Maximum illumination distance: 320m.
Power method: Rear button with "Momentary On" system for light signals
Light selection method: Front button under the head
Head: Aeronautical aluminum
Body: aeronautical aluminum
Finish: anodised, Type III
Lens: ultra-hardened hardened glass with anti-reflection treatment
Batteries: works with a 3400mAh rechargeable 18650 3.7V battery already included in the box
Measurements: 13.9cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 88g. Batteries excluded
Accessories: wrist strap, cordura belt buckle, spare o-ring, clip, spare rubber for the micro-usb plug, spare rubber button
Waterproof: as standard IPX-8, immersible up to 2mt. Of depth for 30min.
Impact Resistance: Resists to 1.5m high falls

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 4x batterie 18650 3.7V 3400mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

Led: Cree XHP35 HI D4 con un ciclo vitale di 50.000 ore
Modi Operativi: 5 potenze luminose regolate elettronicamente + 3 modalità speciali
Potenze e Durate: 1800 Lumens (2h.) -> 800 Lumens (5.30h.) -> 400 Lumens (11h.) -> 200 Lumens (20h.) -> 50 Lumens (60h.) -> Strobo -> S.O.S. -> Beacon
Picco di potenza: 490000 candele
Distanza di illuminazione massima: 1400m. (1.4km)
Metodo di accensione: Pulsante anteriore multifunzione
Metodo di selezione luminosa: Pulsante anteriore multifunzione
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso
Batterie: utilizza 4x batterie Li-Ion 18650 ricaricabili da 3.6V/3.7V a polo sporgente - NON INCLUSE, acquistabili separatamente
Misure: 19.5cm (L) - 5.0cm (D fusto) - 9.0cm (D testa)
Peso: 780g. - batterie escluse
Accessori: lacciolo da polso, o-ring di ricambio, tracolla in nylon, caricabatterie da muro
Impermeabilit: come da standard IPX-8, immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1m di altezza
Note: Display OLED integrato per visualizzare il tipo di modalità selezionata, il voltaggio residuo, i gradi centigradi ed ulteriori informazioni - La torcia ha un sistema integrato che permette di ricaricare le batterie senza toglierle dal fusto; ricarica unicamente batterie di tipo 18650 da 3.6/3.7v

Purpose: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick Hinderer

Purpose: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Carbon Fiber and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Closed thickness: 15mm.
Weight: 118g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Rick Hinderer

er Knives logos
Notes: Design by Rick Hinderer

Intended use: Tactical / Collective

Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0027 serial number imprinted on the clip

Intended use: Tactical / Collective

Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0019 serial number imprinted on the clip

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S110V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: sprint run edition

The SmartRing Tactical series of Nitecore lets you select the LED power from a magnetic potentiometer placed under the torch head.

Magnetic adjustment allows extreme personalization to select the best lightness from 0.1 to 2150 lumens according to your needs. The SRT-9 is also equipped with 4 colored LEDs, located on the outside of the parabola, allowing you to emit red, green, blue or UV light

Powers and durables certified by ANSI / NEMA FL1 standard using 2x 18650 3.7V 3400mAh - under different conditions of use or using different batteries, data may vary

Led: 1x Cree XPH50 with a lifetime of 50,000 hours
Operating Modes: infinite light powers, between 0.1 and 1000 lumens; Strobe, S.O.S., green light, red light, blue light, ultraviolet light, location beacon
Powers and Duration: 2150 Lumens (1h.) -> 0.1 Lumens (250h.)
Power peak: 15100 candles
Maximum illumination distance: 246m.
Power method: Rear button
Light Selection Method: The SmartRing Tactical Magnetic Tie is placed under the torch head
Head: Aeronautical aluminum with stainless steel ring
Body: Aeronautical aluminum
Finish: anodised, Type III
Lens: ultra-hardened hardened glass with anti-reflection treatment
Batteries: sold separately - uses 2x rechargeable 18650 3.7V or 4x CR123 rechargeable 3.0 / 3.7v rechargeable batteries
Measurements: 14.8cm (L) - 4.0cm (D stem) - 4.0cm (D head)
Weight: 224g. - Batteries not included
Accessories: wrist strap, spare o-ring, spare button, tactical ring, Nylon sheath
Waterproof: as standard IPX-8, immersible up to 2mt. Of depth for 30min.
Impact Resistance: Resists to 1.5m high falls
Notes: 500mW / 365nm UV Led flashlight designed for oil inspections, military clearance and explosion operations, gemmology, forensic inspections, document checking, banknote verification, activation of fluorescence etc.