Coltelli e Spade
-
Opinel - Set Barbecue - Coltello N°12 B, Spatola e Pinza XL - coltelli da cucina
The Barbecue Set is the timeless companion of convivial and gluttonous moments.
Useful and effective, it consists of three utensils manufactured in France from quality local materials:
- The N°12 B folding knife: a new size of knife with a 16 cm stainless steel blade and a sturdy beech wood handle from French forests. It has a safety ring that allows the blade to be locked in the open or closed position. It also has a bottle opener at the end of the handle that allows you to open bottles but also hang the knife.
- The Spatula +: The stainless steel spatula with stonewashed finish fits on the handle of the No. 12 B knife and locks with the ferrule. Its large surface area (8.5 cm x 20 cm) allows you to scoop food quickly. It has a narrow angle and bevel on both sides for separating or scraping.
The XL Tong: The stainless steel tongs with stonewashed finish is 40 cm long for easy and safe handling. The asymmetrical head allows you to pick up large pieces with the wide serrated angle and smaller ones with the narrow angle. It also has a grate lifter slot on the heel.
Technical data sheet Knife
Steel: stainless, martensitic 55/57HRC
Handle: beech wood
Blade length: 16cm
Security system: Virobloc ringop-setbbq -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
Victorinox - Evoke Alox - Terra Marrone - Limited Edition 2024 - 0.9415.L24 - knife
With an unmistakable and timeless design, Evoke Alox Limited Edition 2024 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Terra Marrone coloring, it allows you to reconnect with nature! With embossed and anodized aluminum cheeks, it's a really tough knife.
Intended Use: SportyType of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2024V-0.9415.L24 -
ExtremaRatio - KIRI Neck Knife - N690Co Satin - Kiridashi Knife
The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency.
Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.
Intended use: Neck knife / UtilityType of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)ER-KIRI-SA -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Opinel - N°08 - Perrine Honore - Limited Edition Nature 2023 - Knife
After the France, Amour and Escapade editions, discover the Nature edition!
An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.
Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way.
The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.
Intended Use: CollectionType of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logosop-8-002602 -
Opinel - N°08 - Rommy Gonzalez - Limited Edition Nature 2023 - Knife
After the France, Amour and Escapade editions, discover the Nature edition!
An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.
Discover pocket knife N°08 by Rommy González, a Chilean artist who decided to highlight mycelium and the fungi it produces. Her drawings were transcribed on the knife's fascinating handle using the sublimation method. The 8.5-cm blade is made of stainless steel.
Intended Use: CollectionType of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logosop-8-002601 -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Spartan Blades - Talos Liner Lock knife - Black - Harsey Design - SFBL7BK - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7BK -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
Spartan Blades - Talos Liner Lock knife - Green - Harsey Design - SFBL7GR - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7GR -
Opinel - N°10 Beech Wood with Corkscrew and Cap Lifter - Knife
The Opinel N°10 with Corkscrew and Cap Lifter is a special variant of the famous Opinel N°10 knife, featuring a versatile blade and a beech wood handle. This additional version is designed to offer extra functionality.
The blade of the Opinel N°10 is made of high-quality stainless steel, which offers good durability and corrosion resistance. The clip-point shape of the blade makes it ideal for multiple uses, such as cutting, peeling or slicing.
In addition to the blade, this model has two additional tools built into the 'handle. The corkscrew is a curly metal protrusion that can be used to easily remove corks from wine bottles, making the knife also suitable for food and wine-related activities. The bottle opener, on the other hand, is a tool for opening glass bottles with crown corks, allowing drinks to be opened quickly and easily.
The handle of the Opinel No. 10 is made of wood, typically beech, which provides an excellent grip and a traditional look. It features Opinel's classic Virobloc locking system, which allows the blade to be securely locked in the open or closed position, improving safety during use and transport.
Type of production: industrial
Country of manufacture: France
Blade: stainless steel
Handle: beech wood
Blade length: 100mm.
Corkscrew length: 65mm.
Blade thickness: 2mm.
Length when closed: 130mm.
Thickness when closed: 24mm.
Total length: 230mm.
Weight: 62g.
Closure: Viroblocop-10tbn -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Blue Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10CNBL -
Opinel - N°08 Le Savoyard Inox - Beech Wood - Knife
The N°08 Savoyard puts the accent on the cradle of Opinel: the mountains of Savoy!
The beechwood handle is lacquered and decorated with the Savoyard coat of arms. At the end of the handle is a red drawstring for easy carrying. The blade is made of stainless steel and the knife has a Viroblock safety ring.
Type of production: industrial
Country of manufacture: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with pad printing and red strap
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special edition 2023op-8sav -
Opinel - No. 12 Explore Nature Bushcraft - Multipurpose Orange - Knife
Intended Use: Hiking / Sporting
Type of production: Industrial
Country of Production: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Non-slip polymer and FRN
Blade length: 100mm.
Blade thickness: 2.7mm.
Length closed: 160mm.
Total length: 260mm.
Weight: 150g.
Closure: Virobloc
Packaging: Cardboard box with Opinel logos
Notes: 110db emergency whistle - Belt cutter - Tick remover toolop-12expaz -
Opinel - No. 12 Explore Nature Bushcraft - multipurpose green - Knife
Intended Use: Hiking / Sporting
Type of production: Industrial
Country of Production: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Non-slip polymer and FRN
Blade length: 100mm.
Blade thickness: 2.7mm.
Length closed: 160mm.
Total length: 260mm.
Weight: 150g.
Closure: Virobloc
Packaging: Cardboard box with Opinel logos
Notes: 110db emergency whistle - Belt cutter - Tick remover toolop-12expvz -
Victorinox - Hunter Pro Alox - Electric Yellow - Limited Edition 2023 - 0.9415.L23 - knife
With an unmistakable and timeless design, Hunter Pro Alox Limited Edition 2023 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Electric Yellow coloring, it conveys a powerful burst of energy! With embossed and anodized aluminum cheeks, it's a really tough knife.
Intended Use: Sporty
Type of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2023V-0.9415.L23 -
Opinel - N°08 Ski Courchevel Meribel 2023 - Limited Edition - 025747 - Knife
The World Ski Championships will take place this year in Savoie, Courchevel and Méribel. It was therefore an obvious choice for the brand to join the event and present a unique limited edition knife.
The N°08 Courchevel Méribel 2023 has an 8.5 cm stainless steel blade, a Virobloc safety ring and a beech handle. The latter is decorated by pad printing with the official graphics of the event.
An unmissable memory of this winter that combines know-how and passion for the mountains!
Intended use: Sport / Collection
Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin
Handle: Wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Closed length: 108mm.
Total length: 190mm.
Closed thickness: 20mm.
Balancing: -
Weight: 58g.
Closure: Virobloc
Clips: -
Scabbard: -
Packaging: Cardboard box with Opinel logos
Note:OP-08-025747 -
Opinel - Picnic accessories - fork and spoon - outdoor accessory
Picnic + accessories will soon become indispensable for your nomadic meals!
Created in collaboration with designer Franck Fontana, the kit consists of:
- a microfiber napkin case for storing and cleaning items
- two inserts, a fork and a spoon, which are fixed on the handle of a N ° 08 knife (not included in the package)The inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).
To attach the fork or spoon:
- with the knife blade in the closed position, open the ring nut
- fix the fork or spoon at the level of the ring in the small interstices
- close the ringCompact and lightweight, this easily transportable kit is made in France and replaces disposable cutlery.
op-a-picnic -
Opinel - Picnic complete set - knife n ° 8 with fork and spoon - outdoor accessory
Tools to eat comfortably in the office or outdoors!
Designed in collaboration with designer Franck Fontana, the Picnic + set brings together smart and durable accessories for nomadic and comfortable meals.
It is equipped with:
- a N ° 08 knife
- two inserts, a fork and a spoon, which are fixed to the handle of the N ° 08
- a microfiber napkin case for storing and cleaning itemsThe inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).
The fork and spoon are compatible with traditional N ° 08 knives with wooden handle and double safety ring marketed since 2000.
op-picnic+ -
Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145G -
Opinel - No. 08 Tour de France 2022 Black and Yellow - Beech Wood - Knife
The Arc de Triomphe, Mont Ventoux, the best climber motif, rain, fog: the knife's beechwood handle is decorated with pad printing in yellow and black. This graphic collaboration with Manovelle (Matthieu Lifschitz) pays homage to the iconic Tour de France motifs!
The blade is made of Sandvik 12C27M stainless steel and measures 8.5 cm. The double safety ring allows the blade to be locked in the open and closed position. The yellow leather strap at the end of the handle is a nod to the symbolic color of the Tour de France. Delivered in kraft carton with Tour de France sticker.
Type of production: industrial
Country of production: France
Blade: stainless steel Sandvik 12C27
Handle: made of Beech wood with black and yellow pad printing
Blade length: 80mm.
Blade thickness: 1.6mm.
Length closed: 110mm.
Thickness closed: 20mm.
Total length: 195mm.
Weight: 60g.
Locking system: Virobloc both when open and closed
Notes: special limited edition to celebrate the Tour de France 2022op-8tdf22 -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
ExtremaRatio - Satre - N690 Stone Washed - Neck Knife
Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.
It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.
In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.
The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.
The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.
Intended Use: Neck Knife / Hiking / UtilityType of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).ER-SAT-SW -
ExtremaRatio - DMP - HCS StoneWashed - Knife
DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.
The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.
Intended Use: Tactical / Multi-role
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -ER-DMP-HC -
ExtremaRatio - DMP - Wolf Gray StoneWashed - Knife
DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.
The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.
Intended Use: Tactical / Multi-role
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -ER-DMP-WG -
ExtremaRatio - DMP - Ranger Green StoneWashed - knife
DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.
The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.
Intended Use: Tactical / Multi-role
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -ER-DMP-RG -
Opinel - N ° 08 Luxe knife - Padouk wood - Knife
With a stainless steel blade with a polyglass finish, this knife offers exceptional cutting and ease of maintenance. The shape of the handle developed by Opinel guarantees the user an ideal grip. Always equipped with its Virobloc safety ring, the N ° 08 guarantees good reliability. Padouk is highly resistant to moisture.
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror
Handle: Padouk wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Closed length: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 58g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos and black case
Note:op-8lupa -
Opinel - N ° 10 Effilé knife Beech - Knife
Opinel - Les Effilés ash wood - 10 in stainless steel - knife
Ranked # 10
Type of production: industrial
Lama production: France
Blade: stainless steel
Handle: in beech wood
Blade length: 95mm.
Blade thickness: 2mm.
Length closed: 146mm.
Thick when closed: 125mm.
Total length: 225mm.
Weight: 44g.
Closing: viro blockop-10effa -
Opinel - No. 07 Chestnuts, garlic and pitting
Since 1890, in a pocket, backpack, kitchen drawer or on the table, Opinel has been synonymous with a nomadic art of living, natural spirit, moments of sharing and complicity.
Opinel - No. 07 Chestnuts, garlic and pitting
A knife for nature-loving foodies!
This pocket knife is used for cutting and peeling chestnuts, as well as peeling garlic or quickly removing stones and pits from fruit by making an incision. It is ideal for preparing jams and tarts Its small size means it fits easily into your pocket and its short, pointed and curved 4 cm blade is easier to handle than a long blade. Perfect as a useful and practical gift idea. This knife can be personalised.
Blade length :4 cm Stainless steel We use Sandvik 12C27 modified stainless steel. It is anti-corrosive thanks to the addition of chrome and requires no special maintenance. Its carbon content of at least 0.40% gives excellent cutting edge.
Blade hardness 57-58 HRC Safety ring Invented by Marcel Opinel in 1955, the Virobloc safety ring is fitted to all folding knives from the N° 06. Cut out of stainless steel, the Virobloc has two sections, one fixed and one sliding. In addition to locking the blade open (safety in use), it is now possible to lock the blade closed (safety in transport).
op-7cas -
Opinel - N ° 08 Luxe knife - Beli wood - Limited Edition - Knife
Intended use: Sports / Collection
Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polished
Handle: Beli wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 58g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos and black case
Notes: Limited edition 3500 pieces, not numberedop-8lube -
Opinel - N ° 08 Luxe birch knife red laminated - Knife
Intended use: Sports / Collection
Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Red laminated birch wood
Blade length: 82mm.
Blade thickness: 2mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 44g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos
Note:op-8lublro -
Opinel - N ° 08 Luxe Birch knife laminated brown - Knife
Intended use: Sports / Collection
Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Brown laminated birch wood
Blade length: 82mm.
Blade thickness: 2mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 44g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos
Note:op-8lublma -
ExtremaRatio - Giant Mamba - HCS - tactical knife
The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.
Intended use: Tactical / MultiroleType of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-GMA-HC -
ExtremaRatio - Contact C Knife Ranger Green - tactical knife
Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced.
The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.
Intended use: Tactical / Backup
Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 373g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-CC-RG -
ExtremaRatio - Resolza 10 - Stone Washed - pattada knife
RESOLZA, a term of ancient origin, is today one of the most famous traditional knives of our country. The name suggests the razor by chance.
It was born in Sardinia centuries ago and has accompanied its inhabitants until today in the daily work of a peasant and pastoral life, following them even when its men were called to war. The chronicles of the Sassari Brigade during the First World War cite this knife among its soldiers' equipment.
We wanted to make a tribute by revisiting it according to our canons, without wanting to hurt any of the prestigious Sardinian artisans who still today pass on the tradition and wisdom of their ancestors. The dimensions and proportions are the original ones of a 10 cm blade, but the materials and technologies are those of our production. The handle revised in our style, the blade most faithful to tradition. In addition to the original, it has the blade lock open.
Intended use: sports
Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 100mm.
Blade thickness: 3mm.
Total length: 220mm.
Weight: 65g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: blade with stonewashed treatmentER-RE10-SW -
ExtremaRatio - Contact Ranger Green Knife Stone Washed - tactical knife
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -Extrema Ratio developed the first knife of a new production line, called CONTACT.
It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.
The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.
The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.
The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.
so be used as glass breakers
ER-CON-RG -
ExtremaRatio - Contact Wolf Gray Knife Stone Washed - tactical knife
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -Extrema Ratio developed the first knife of a new production line, called CONTACT.
It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.
The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.
The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.
The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.
so be used as glass breakers
ER-CON-WG -
Mcusta - Take knife VG10 Damascus - Shinra Series - Stamina Wood - MC-0075D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0075D -
Mcusta - Tsuchi Damascus knife - Shinra Stamina Wood - MC-0078D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0078D -
Mcusta - Katana knife series - MC-0044C - Black / Green - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0044C -
Mcusta - Katana knife series - MC-0042C - Blue / Orange - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with VG-10 edge hardened to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0042C -
Mcusta - Masamune Dates MC-0186D knife - VG10 Damascus SanMai - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Notes: -MC-0186D -
ExtremaRatio - Nimbus Special - Collector's Edition - Knife
Born from the revisitation of the 39-09 model, the Nimbus was developed and chosen by the 183rd "Nembo" Paratrooper Regiment as a commemorative knife of the events of Case Grizzano which on 19 April 1945 saw the Nembo paratroopers engaged against the paratroopers of a German division . The clashes raged for 12 hours and were often resolved by hand-to-hand combat with the white weapon. A few days after the end of the Second World War one third of the battalion's men remained on the field, but their sacrifice led to the conquest of the battle. The knife in addition to wanting to commemorate an important event of our Armed Forces is the result of a development that has been carefully studied also in the technical aspects, so as to make it suitable for a concrete operational use.
Particular attention has been paid to taking care of the dimensions, the shape and the search for solutions such as the kydex sheath, which is designed to make the knife an instrument capable of adapting to the most complex requirements of the port.
The light and compact blade meets the demands of a modern tactical knife today.
Intended use: Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin finish
Handle: Wood
Blade length: 141mm.
Blade thickness: 5mm.
Total length: 263mm.
Weight: 203g.
Sheath: in Leather
Packaging: display case
Notes: -ER-NIM-SP -
Opinel - N ° 08 Gravure Vélo - Mountain Bike Engraving - Knife
From the famous French company Opinel, a fold has now become a timeless classic.
Blade: Sandvik stainless steel (carbon content 0.4%).
Handle: in beech wood
Locking system: exclusive Virobloc system to lock the blade in closing and opening.No.8
- Blade length: 8cm
- Total length: 19cm
- Weight: 44 gr.
- Special edition 2018 with handle engraved in pyrography
- Series composed of 3 different subjects (Trekking, Ski and Mountain Bike)op-8grve -
Opinel - N ° 08 Gravure Rondo - Trekking Engraving - Knife
From the famous French company Opinel, a fold has now become a timeless classic.
Blade: Sandvik stainless steel (carbon content 0.4%).
Handle: in beech wood
Locking system: exclusive Virobloc system to lock the blade in closing and opening.No.8
- Blade length: 8cm
- Total length: 19cm
- Weight: 44 gr.
- Special edition 2018 with handle engraved in pyrography
- Series composed of 3 different subjects (Trekking, Ski and Mountain Bike)op-8grro -
Opinel - Nomad Cooking Kit
Since 1890, in a pocket, backpack, kitchen drawer or on the table, Opinel has been synonymous with a nomadic art of living, natural spirit, moments of sharing and complicity. The Nomad Cooking Kit Designed for the wanderer, the Opinel Nomad Kit includes a cutting board (20cm x 12cm) and three essential cooking tools: Corkscrew knife. 10cm stainless steel folding knife with integrated corkscrew in the handle Bread knife. 12cm stainless steel with serrated blade. Perfect for bread, fruit and vegetables. Folding Peeler. #6 stainless steel The set comes bundled in a piece of microfibre cloth in the Japanese Furoshiki method. Unpack the kit and use the carrying cloth as a kitchen towel or place mat. All three stainless steel tools are made in France and feature a wooden handle made from European-grown, sustainably harvested beech wood. Designed for ski cabins, campsites, van life, vacation rentals, or wherever wanderlust leads (and good meals follow).OP-2177 -
Mcusta - MC-0191C Slip Joint Knife Black / Red Wood - knife
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-0191C -
Mcusta - MC-193C Slip Joint Knife Black / Green - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-193C -
ExtremaRatio - Panthera Satin - folding knife
Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.
Intended use: Sports / Tactical
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal Anodised aluminum
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 165mm.
Total length: 247mm.
Weight: 130g.
Closure: Liner Lock
Clip: absent
Sheath: absent
Note: -ER-PAN-SA -
Opinel - Les Effilés walnut - n15 stainless steel - knife
Opinel is a French company founded by the Opinel family based in Saint-Jean-de-Maurienne, which since 1890 produces and distributes quality knives.
The structure of the Opinel knife is simple, with a steel or carbon blade and the stabilized wooden handle, covered with a special protective paint.
Opinel knives are lightweight, easy-to-handle and affordable, and are therefore among the best-selling in the world.N.15
Type of production: industrial
Blade production: France
Blade: stainless steel
Manicure: in walnut wood
Blade Length: 150mm.
Blade thickness: 1.4mm.
Closed length: 175mm.
Closed thickness: 21.5mm.
Total length: 320mm.
Weight: 56g.
Closure: viro blockop-15efno -
Opinel - Les Effilés walnut - n8 stainless steel - knife
Opinel is a French company founded by the Opinel family based in Saint-Jean-de-Maurienne, which since 1890 produces and distributes quality knives.
The structure of the Opinel knife is simple, with a steel or carbon blade and the stabilized wooden handle, covered with a special protective paint.
Opinel knives are lightweight, easy-to-handle and affordable, and are therefore among the best-selling in the world.N.08
Type of production: industrial
Blade production: France
Blade: stainless steel
Manicure: in walnut wood
Blade Length: 80mm.
Blade thickness: 1.2mm.
Closed length: 105mm.
Closed thickness: 17.5mm.
Overall length: 181mm.
Weight: 24g.
Closure: viro blockop-8efno -
Opinel - N ° 7 Outdoor Junior Red - knife
Destination of use: Hiking
Type of production: Industrial
Country of production: France
Blade: Stainless Steel Sandvik 12C27
Blade treatment: satin finish
Manicure: polymers with non-slip inserts
Blade Length: 75mm.
Blade thickness: 2mm.
Closed length: 103mm.
Total Length: 179mm.
Closed thickness: 18mm.
Weight: 48g.
Closure: Virobloc
Packing: Cardboard box with Opinel logos
Notes: Rounded Tip - 100db Emergency Whistleop-7outjr -
Opinel - N ° 7 Outdoor Junior Blue - knife
Destination of use: Hiking
Type of production: Industrial
Country of production: France
Blade: Stainless Steel Sandvik 12C27
Blade treatment: satin finish
Manicure: polymers with non-slip inserts
Blade Length: 75mm.
Blade thickness: 2mm.
Closed length: 103mm.
Total Length: 179mm.
Closed thickness: 18mm.
Weight: 48g.
Closure: Virobloc
Packing: Cardboard box with Opinel logos
Notes: Rounded Tip - 100db Emergency Whistleop-7outjb -
Opinel - Mon Premier Opinel - 7 round toe inox - Knife
Opinel - 7 - stainless steel blade - knife
From the famous French company Opinel, a folding has become a timeless classic.
Sandvik stainless steel blade (carbon content 0.4%).
Handle of beech wood.
Exclusive Virobloc system to lock the blade in the closing and opening.
Ranked # 8
- Blade 7.5 cm, total length 17.5 cm
- Weight: 38 gr.op-7prem -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Opinel - Oak Wood - 8 steel - knife
intended use: sports / collection
type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinelop-8luq -
Opinel - Olive Wood - 8 steel - knife
intended use: sports / collection
type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinelop-8luu -
Opinel - Walnut Wood - 8 steel - knife
intended use: sports / collection
type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinelop-8lun -
Victorinox - Trailmaster Desert - 0.8461.MWC941 - Swiss Pocket Knife
You never know when a simple morning walk will take you down new trails, but that possibility is no problem if you have the Desert Camo multi-purpose Trailmaster with you.
Nestled between the two two-component cheek pads of this item are ten features that combine to give you all the support you might need. So no matter where you're going or what you're doing, this is the reliable tool you should take with you on every adventure!
FEATURES
1. Large lockable blade
2. Phillips screwdriver
3. Can opener with
4. - Small screwdriver
5. Cap lifter with
6. - Screwdriver
7. - Wire stripper
8. Reamer / Awl
9. Key ring
10. Wood sawSPECIFICATIONS
Functions: 10
Cheek material: two-component
Dimensions: 11.10 x 1.80 x 3.45cm
Weight: 130g
Blade opening: one-handed
Locking system: Liner Lock on blade and main flat screwdriverV-0.8461.MWC941 -
ExtremaRatio - N.K.3 Karambit Stone Washed - Neck Knife - NK3K - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3K-SW -
Opinel - Folding Saw No.12 - knife
The monster stainless-bladed no.12 Opinel locking saw is large, perfect for cutting branches and foliage of up to 8/9cm in diameter. With its blade designed with razor-sharp teeth like knives, cutting is clean, even and effortless. The blade locks using the Virobloc safety ring, which in addition to locking the blade in the open position for safety of use, now enables locking of the blade in the closed position for safety during carrying.
Blade Material: Carbon steel blade with anti-corrosion coating
Blade Length (cm): 12.0
Blade Length (cm): 12.0
Blade Thickness (cm): 0.2
Overall Length (cm): 24.0
Cutting Edge (cm): 12.0
Handle Material: Beech
Lock Type: Ring Lockop-12seg -
ExtremaRatio - Resolza S Satin - folding knife
The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.
Intended use: Sports
Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 79mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 173mm.
Weight: 36g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -ER-RE8-SW -
Opinel - N. 10 Corkscrew - knife
The famous French company Opinel, a particular issue of a folding has become a timeless classic. This version of the n. 10 is equipped with a practical corkscrew (5 sipirali, total length 65mm) folded into the handle.
Stainless steel blade Sandvik (carbon content 0.4%)
Virobloc exclusive system to lock the blade in closing and opening.Ranked # 10
Type of production: Industrial
Production Lama France
Blade: Stainless steel
Handle: beech wood
Blade length: 100mm. - Corkscrew Length 65mm.
Blade Thickness: 2mm.
Closed Length: 130mm.
Thick when closed: 24mm.
Overall length: 230mm.
Weight: 62g.
Closing: Viroblocop-10cav -
ExtremaRatio - N.K.2 Stone Washed - Neck Knife - NK2
NK2 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK2-SW -
Opinel - Display Glass Collection 10-piece stainless steel blade - knife
Opinel - Display Glass Collection 10-piece stainless steel blade - knife
Invented in 1890 and still today produced in Savoy, the pocket knife Opinel is famous worldwide.
Collection Set of 10 pieces 2-12 with glass lid
Type of production: Industrial
Production Lama France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Wood
Packaging: Wooden box with logos Opinelop-001314 -
Victorinox - Hunter Pro Wood Handle 0.9410.63 - utility knife
Victorinox - Hunter Pro Wood Handle 0.9410.63 - utility knife
Intended use: Sport / Hunting
Type of production: Industrial
Production Lama: Switzerland
Blade: stainless steel 1.4116
Blade treatment: Satin
Handle material: wood
Blade length: 96mm.
Blade thickness: 2.5mm.
Length closed: 130mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closure: Back Lock
Clip: -
Sheath: Vinyl
Packaging: Cardboard box with logos Victorinox
Notes: -V-0.9410.63 -
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Opinel - n. 9 Oysters and Shells - knife
From the famous French company Opinel, a particular issue of a folding has become a timeless classic. A knife studied for the opening of oysters and shells, thanks to the shape of the blade and to its generous thickness.
Blade in Sandvik stainless steel (carbon content 0.4%)
Exclusive Virobloc to lock the blade in closing and opening.Ranked # 9
Type of production: industry
Production Lama France
Blade: stainless steel
Handle: bubinga wood
Blade length: 65mm.
Blade Thickness: 2.2mm.
Length closed: 118mm.
Thick when closed: 22mm.
Overall length: 180mm.
Weight: 62g.
Closing: Viroblocop-9ostr -
Opinel - N ° 15 Effilé Padouk - Knife
Opinel - N ° 15 Effilé Padouk - Knife
Ranked # 15
Type of production: industrial
Production Blade: France
Blade: stainless steel
Handle material: Padouk
Blade length: 150mm.
Blade Thickness: 1.2mm.
Closed Length: 175mm.
Thick when closed: 22mm.
Overall length: 325mm.
Weight: 58g.
Closure: viro blockop-15efpa -
Opinel - N ° 08 Luxe birch knife gray laminated - Knife
Intended use: Sports / Collection
Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Laminated birch wood in silver gray color
Blade length: 82mm.
Blade thickness: 2mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 44g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos
Note:op-8lublg