bing

Consigli

Set Ascending Direction

Items 1-48 of 57

Page
  1. Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife

    This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

    Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
    Very robust and suitable for all jobs


    Handle: ox horn
    Blade: 440A Steel
    Total length: 16 cm
    Blade length: 7.5 cm

    50075
    €131.15
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
    Out of stock
  2. Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife

    Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn and nickel silver
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 243mm.
    Weight: 148g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.
    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    R-FIC24
    €274.59
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  3. Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife

    Pattada Brotzu raw mutton 22cm PBM22G - knife
    Typical folding knife craftsmanship Sardinian manufactured by Conaz Scarperia

    Blade: stainless steel 420
    Handle: raw mutton
    Blade length: 90mm.
    Overall length: 215mm.
    Weight: 64g.

    WARNING: these are natural material, the color of the horn may be different from the one in the picture.

    PBM22G
    €95.90
    Only 2 left
    Only 2 left
    Rating:
    100%
    5
  4. Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 24cm - 53164 - knife

    Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 243mm.
    Weight: 83g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    PBM24G
    €108.20
    Only 1 left
    Only 1 left
    Rating:
    80%
    4
    Out of stock
  5. Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 27cm - 53165 - knife

    Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Raw ram horn
    Blade length: 110mm.
    Blade thickness: 3mm.
    Length closed: 145mm.
    Total length: 265mm.
    Weight: 102g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    PBM27G
    €137.70
    Only 2 left
    Only 2 left
  6. Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife

    Maremma in Olivo - Series Kilama MFO18 - knife

    The series Kilama Councils is a modern interpretation of Italian regional knives.
    The materials and finishes remain the same as always but the line has the form "new"
    that reflect the traditional and regional Italian classics knives.


    Total length: 185
    Blade length: 80
    blade thickness: 2.5
    weight. 55g
    Steel: 420
    manicatura: amaranth wood
    Sheath: fabric
    Package: Box Advice with cleaning kit knife

    50157
    €118.03
    Only 1 left
    Only 1 left
  7. Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife

    The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
    Type of production: artisan

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: olive wood
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Length closed: 95mm.
    Total length: 185mm.
    Weight: 50g.
    Closing: retention spring
    Packaging: Tips box with knife cleaning kit
    Sheath: fabric case

     

    GAO18
    €118.85
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  8. Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife

    The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: amaranth wood
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 90mm.
    Total length: 185mm.
    Weight: 55g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    SEAM18
    €89.34
    Only 1 left
    Only 1 left
  9. Conaz Consigli Scarperia - Piemontese knife in polished ox - 50046 - knife

    Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
    Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox horn
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Length closed: 90mm.
    Total length: 180mm.
    Weight: 50g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    PIC-18
    €136.07
    Only 1 left
    Only 1 left
  10. Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife

    Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
    Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
    Intended use: Collection

    Type of production: artisanal
    Blade: X50CrMoV15 stainless steel
    Production Lama: Italy
    Handle: Ox horn
    Blade length: 85mm.
    Blade thickness: 2.5mm.
    Total length: 200mm.
    Weight: 58g.
    Closing:
    Notes: handcrafted in the city of Scarperia (FI)

    The colors of the materials with which our handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.

    50001
    €172.13
    Only 1 left
    Only 1 left
    Rating:
    97%
    4.9
  11. Conaz Consigli Scarperia - Arbus knife - Arburese Bovine Blonde Horn 20cm - 53021 - knife

    Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.

    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn and nickel silver with handcrafted engravings
    Blade length: 85mm.
    Blade thickness: 2.5mm.
    Length closed: 15mm.
    Total length: 205mm.
    Weight: 73g.
    Closing: without blade lock
    Packaging: cardboard box
    Sheath: fabric case
    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    2448B
    €77.04
    Only 1 left
    Only 1 left
    Rating:
    73%
    3.7
  12. Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife

    Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.

    The shape reached today derives from ancient styles used in past times.

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox wood
    Blade length: 85mm.
    Blade thickness: 2mm.
    Length closed: 115mm.
    Total length: 205mm.
    Weight: 50g.
    Closing: without lock
    Packaging: cardboard box
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    2448
    €77.04
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  13. Consigli - Portaintavola - 4 piece cheese knife set

    4 piece cheese knife set CHEESE SET Savouring cheese is a pleasure to be accompanied by the right knife. Consigli proposes a Cheese Set complete with four knives in Plexiglas, an elegant, hygienic and strong material that ensures a product that will last. This Cheese Set is a little masterpiece of design: blades in tempered stainless steel enclosed in a discreetly refined box in black-andwhite Plexiglas. Available
    8720
    €114.75
    Only 1 left
    Only 1 left
  14. Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife

    Intended use: sporting/collection
    Type of production: artisan
    Blade production: Italy
    Blade: Stainless steel X50CrMoV15
    Blade treatment: -
    Handle: Raw ox horn
    Blade length: 70mm.
    Blade thickness: 1,6mm.
    Length closed: 90mm.
    Total length: 160mm.
    Weight: 53g.
    Closure: without blade lock
    Packaging: cardboard box
    Sheath: -

    Craftsmanship is beautiful because it is varied

    The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

    50307
    €49.18
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  15. Consigli - Portaintavola - 2 piece cheese knife set

    2 piece cheese knife set CHEESE SET Savouring cheese is a pleasure to be accompanied by the right knife. Consigli proposes a Cheese Set complete with four knives in Plexiglas, an elegant, hygienic and strong material that ensures a product that will last. Cheese knives are equally important to serve your favorite cheeses properly and to make the most of their flavor and taste. Consigli’s cheese knives are handcrafted cutting tools that combine high-performance blades and an elegant and distinctive look. The sets of 2 include an almond knife and a soft cheese knife with their block. Consigli is a family of knife makers who has been producing high end cutting tools for more than 60 years. How to use cheese knives Product details: - stamped blade made of high quality stainless steel AISI 420 - full tang, 4.3 inches blade size - Plexiglass handles and block.
    8720B
    €57.38
    Out of stock
  16. Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife

    The series Kilama by Consigli is a modern interpretation of Italian regional knives.
    The materials and finishes remain the same as always but the line has the form "new"


    Total length: 185
    Blade length: 80
    Blade thickness: 2.5
    Weight. 55g
    Steel: 420
    Hanfle: amaranth wood
    Sheath: -
    Package: box with cleaning kit

    50154
    €108.20
    Out of stock
  17. Conaz Consigli Scarperia - Hunchback Abruzzese Cattle knife 24cm - knife

    This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.

    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 105mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 247mm.
    Weight: 107g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    50024
    €225.41
    Only 0 left
    Only 0 left
    Out of stock
  18. Conza Consigli Scarperia - Maremmano knife 24cm Ox Horn - 50031 - knife

    The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 140mm.
    Total length: 240mm.
    Weight: 120g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    R-MFC24
    €225.41
    Only 0 left
    Only 0 left
    Out of stock
  19. Consigli Scarperia - Calabrese in bovine R-CAC20 - knife

    A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

    Stainless steel blade 440.
    Blade length 8 cm.
    Blade thickness 3 mm.
    Overall length 20 cm.
    Weight 62 gr.
    Handle in horn tip

    R-CAC20
    €163.93
    Only 0 left
    Only 0 left
    Rating:
    90%
    4.5
    Out of stock
  20. Consigli Scarperia - Napoletano in bovine R-NAC20 - knife

    The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

    Stainless steel blade 440.
    Blade length 8 cm.
    Blade thickness 3 mm.
    Overall length 20 cm.
    Weight 62 gr.
    Handle in horn tip

    R-NAC20
    €163.93
    Only 0 left
    Only 0 left
    Rating:
    87%
    4.4
    Out of stock
  21. Consigli Scarperia - Casertano in bovine R-CASC20 - knife

    The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

    Stainless steel blade 440.
    Blade length 8 cm.
    Blade thickness 3 mm.
    Overall length 20 cm.
    Weight 70 gr.
    Handle in horn tip

    R-CASC20
    €171.31
    Only 0 left
    Only 0 left
    Rating:
    90%
    4.5
    Out of stock
  22. Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife

    Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Raw ram horn
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 95mm.
    Total length: 170mm.
    Weight: 34g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

    PBM17G
    €72.95
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  23. Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 20cm - 53162 - knife

    Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Raw ram horn
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Weight: 50g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

    PBM20G
    €88.52
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  24. Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife

    The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Length closed: 105mm.
    Total length: 185mm.
    Weight: 63g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    RAB18
    €122.95
    Only 0 left
    Only 0 left
    Out of stock
  25. Consigli Scarperia - Zuava Cattle Polished R-ZXC19 - knife

    Zuava Cattle Polished R-ZVC19 - knife

    Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

    Stainless steel blade 440.
    Blade length 8 cm.
    Blade thickness 3 mm.
    Overall length 19 cm.
    Weight 100 gr.

    R-ZXC19
    €97.54
    Out of stock
  26. Conaz Consigli Scarperia - Zuava ox horn - cm 19 - 50077 - knife

    Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

    440 stainless steel blade.
    Blade length 8 cm.
    Blade thickness 3 mm.
    Open length 19 cm.
    Weight 100 gr.

    50077
    €154.92
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  27. Conaz Consigli Scarperia - 24cm ox horn Zuava with blade lock - 50079 - folding knife, made in Italy

    Intended use: collection

    Type of production: handmade
    Country of Production: Scarperia - Italy
    Blade: stainless steel X50CrMoV15
    Blade finish: satin-finished
    Handle: ox horn and brass
    Blade length: 100mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 240mm.
    Weight: 193g.
    Closure: blade lock
    Packaging: cardboard box with Consigli logos
    Sheath: fabric pouch

    Handicrafts are beautiful because they are varied!
    The colors of the materials from which crafts are made may vary from those shown in the pictures.

    Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

    50079
    €250.00
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  28. Conaz Consigli Scarperia - Palmerino horn cattle PA2C20 two blades - knife

    Palmerino horn cattle PA2C20 two knives - knife

    The production of Scarborough has not devoted much attention to penknives.
    It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
    This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
    In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
    Proposed model is at the tip of the horn two blades.

    Stainless steel blade 440.
    Blade length 4.6 cm.
    Blade thickness 2.5 mm.
    Overall length 15 cm.
    Weight 40 gr.

    PA2C20
    €89.34
    Out of stock
  29. Consigli Scarperia - Rasolino in bovine RAC-20 - Knife

    Rasolino in bovine RAC-20 - Knife

    The name of this knife comes from the shape of the blade, reminiscent of the razor.
    Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
      The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

    Stainless steel blade 440.
    Blade length 9 cm.
    Blade thickness 2.5 mm.
    Overall length 20 cm.
    Weight 70 gr.

    RAC-20
    €163.11
    Only 0 left
    Only 0 left
    Out of stock
  30. Conaz Consigli Scarperia - Fiorentino knife Engraved Silver Cattle 50017 - knife

    The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.

    Intended use: sports / collection

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn and Silver with handcrafted engravings
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Length closed: 110mm.
    Total length: 195mm.
    Weight: 76g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which our handcrafted products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    R-FIC20A
    €254.10
    Only 0 left
    Only 0 left
    Out of stock
  31. Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife

    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Raw ox horn
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 110mm.
    Total length: 190mm.
    Weight: 79g.
    Closing: without blade lock
    Packaging: cardboard box
    Sheath: -


    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    50309
    €53.28
    Only 0 left
    Only 0 left
    Rating:
    73%
    3.7
    Out of stock
  32. Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife

    Mugello 16 cm horn cattle raw E-CMC16G - knife

    Blade: 420 stainless steel
    Handle: raw beef
    Blade length: 75mm.
    Overall length: 165mm.
    Weight: 39g.
    Closed Length: 90mm.


    CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

    50306
    €49.18
    Only 0 left
    Only 0 left
    Rating:
    80%
    4
    Out of stock
  33. Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife

    Ghiandina 16 cm horn cattle raw E-GHC16G - knife

    Blade: 420 stainless steel
    Handle: raw beef
    Blade length: 70mm.
    Overall length: 160mm.
    Weight: 36g.
    Closed Length: 90mm.


    CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

    E-GHC16G
    €48.36
    Only 0 left
    Only 0 left
    Out of stock
  34. Conaz Consigli Scarperia - Pattada knife Brotzu raw ram horn - 53037 - 22cm - knife

    This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox horn
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Length closed: 120mm.
    Total length: 215mm.
    Weight: 53g.
    Closing: without lock
    Packaging: cardboard box
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    S-CMM22
    €77.05
    Only 0 left
    Only 0 left
    Out of stock
  35. Conaz Consigli Scarperia - Pattada Brotzu knife ram horn - 53035 - 17cm - knife

    This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox wood
    Blade length: 70mm.
    Blade thickness: 2mm.
    Length closed: 95mm.
    Total length: 170mm.
    Weight: 35g.
    Closing: without lock
    Packaging: cardboard box
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

    S-CMM17
    €69.67
    Only 0 left
    Only 0 left
    Out of stock
  36. Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife

    Roman Ring with polished horn cattle R-RMC30A - knife

    Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

    Intended Use: Collection

    Type of production: craft
    Blade: carbon steel
    Treatment Blade: -
    Production Blade: Italy
    Handle: Horn Cattle Etched
    Blade length: 130mm.
    Blade Thickness: 2.5mm.
    Closed Length: 160mm.
    Overall length: 290mm.
    Balancing: -
    Weight: 106g.
    Closure: Without Rear Blade
    Clip: -
    Sheath: -
    Notes: -

    R-RMC30A
    €286.07
    Out of stock
  37. Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife

    Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

    Type of production: artisan

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: bovine horn
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Length closed: 110mm.
    Total length: 200mm.
    Weight: 70g.
    Closing: without spring
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    0260
    €151.64
    Only 0 left
    Only 0 left
    Out of stock
  38. Conaz Consigli Scarperia - Centenario Maremmano R-MFC20 Lama a Foglia Corno

    Le prime notizie certe su questo coltello risalgono al 1848. Un esemplare, datato 1871, è conservato nell'Archivio di Stato di Firenze, allegato agli atti di un processo a carico di un pregiudicato. Su di esso è ben visibile il marchio di un fabbricante di Scarperia, Gustavo Buffi, la forma della lama è quella con dorso angolato, mantenuta anche nel Novecento e presente nei cataloghi di varie ditte scarperiesi. Il Maremmano è un modello in punta di corno. 

    Lama. in acciaio inox 440, 
    Manicatura: in corno bovino lucido
    Lunghezza totale 200 mm
    Lunghezza lama: 90 mm 
    Affilato a mano

     

    ATTENZIONE: trattandosi di materiale naturale, la colorazione del corno può risultare diversa da quella presente in foto.

    7164
    €180.33
    Out of stock
  39. Conaz Consigli Scarperia - Maremmano Flat blade Olive - 50040 - knife

    Knife in use for certain information until the first half of the 19th century in the Tuscan and Lazio Maremma.
    Through finds from the criminological museum of Rome, he was seen among those knives handed over by the rioters of the penal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to put down a revolt.

    Intended use: sports / collection
    Type of production: artisanal
    Production Lama: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: olive wood
    Blade length: 80mm.
    Blade thickness: 3mm.
    Closed length: 105mm.
    Total length: 205mm.
    Weight: 56g.
    Closure: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    The craftsmanship is beautiful because it is varied

    The colors of the materials with which the handicrafts are made may vary from those shown in the images.
    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

    50040
    €131.15
    Out of stock
  40. Conaz Consigli Scarperia - Mozzetta light ox horn 50034 - knife

    This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
    Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
    For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

    Intended use: sports / collection
    Type of production: artisanal
    Production Lama: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 80mm.
    Blade thickness: 3mm.
    Closed length: 105mm.
    Total length: 185mm.
    Weight: 63g.
    Closure: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

     

    The craftsmanship is beautiful because it is varied

    The colors of the materials with which the handicrafts are made may vary from those shown in the images.
    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

    50034
    €110.66
    Out of stock
  41. Conaz Consigli Scarperia - Pattada Brotzu knife bovine horn 22cm - 53142 - knife

    This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
    The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
    Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".


    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn and nickel silver with handcrafted engravings
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Length closed: 120mm.
    Total length: 215mm.
    Weight: 62g.
    Closing: without blade lock
    Packaging: cardboard box
    Sheath: fabric case


    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    CO-0255
    €55.74
    Only 0 left
    Only 0 left
    Out of stock
  42. Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife

    This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox horn
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 243mm.
    Weight: 76g.
    Closing: without lock
    Packaging: cardboard box
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

    7161
    €75.41
    Only 0 left
    Only 0 left
    Rating:
    87%
    4.4
    Out of stock
  43. Conaz Consigli Scarperia - Senese knife polished bovine horn 50063 - knife

    The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
    The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

    Intended use: sports / collection

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 197mm.
    Weight: 73g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

    2381
    €172.13
    Only 0 left
    Only 0 left
    Out of stock
  44. Conaz Consigli Scarperia - The Guascona Sabre à Champagne - Sabre

    Conaz Consigli Scarperia - The Guascona Sabre à Champagne - Sabre For generations the Family Councils produces coninfinita passion and with great skill prized pocket knives of Italian regional tradition and cutlery table forged , in the manner of knife Scarperia who have made ​​an art of this craft since 1300 . Sabre à Champagne , available with Black methacrylate handle, olive wood or snake wood. Packaged in a prestigious wooden box with tissue case and stand from exposure . Overall length 54 cm . Blade thickness : 4 mm . Blade length : 38 cm made ​​of steel AISI 420 .
    5333G
    €319.67
    Only 0 left
    Only 0 left
    Out of stock
  45. Conaz Consigli Scarperia - Vernante Horn horn ox - 20 cm - 50073 - knife

    Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
    Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

    The 420 stainless steel blade can be scimitar or straight.
    On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
    Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
    The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

    Total length: 200 mm
    Blade length: 90mm
    Handle: in full polished horn
    Sharpened by hand

    2351
    €163.11
    Only 0 left
    Only 0 left
    Out of stock
  46. Conaz Consigli Scarperia - Zuava knife Buffalo horn "in the old way" 50091 - knife

    Traditional Scarperia knife and used throughout Tuscany until the early 1800s.
    It had an element of novelty, for the time: the metal structure inside the handle. As well as in the traditional bovine, Consiglio proposes it today also in buffalo and exotic woods.

    Intended use: sports / collection

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Buffalo horn
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 110mm.
    Total length: 19mm.
    Weight: 93g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    50094
    €171.31
    Only 0 left
    Only 0 left
    Rating:
    80%
    4
    Out of stock
  47. Conaz Consigli Scarperia - Zuava knife with Ox horn sundial - 50080 - knife

    The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox horn
    Blade length: 105mm.
    Blade thickness: 3mm.
    Length closed: 130mm.
    Total length: 240mm.
    Weight: 190g.
    Closing: retention spring
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    50080
    €225.41
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  48. Conaz Consiglio Scarperia - Gobbo Abruzzese Olivo - 50025 - knife

    This slender-shaped knife with a curved handle derives from ancient models, used by the shepherds of Abruzzo.
    Its adoption in the repertoire of knives manufactured in Scarperia (where the particular fold of the handle earned it the name of "hunchback") dates back to the end of the nineteenth century and took place without obvious changes compared to the original type, equipped with a simple spring and one piece bovine horn handle.

    Intended use: sports / collection
    Type of production: artisanal
    Production Lama: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: olive wood
    Blade length: 85mm.
    Blade thickness: 3mm.
    Closed length: 112mm.
    Total length: 200mm.
    Weight: 60g.
    Closure: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    The craftsmanship is beautiful because it is varied

    The colors of the materials with which the handicrafts are made may vary from those shown in the images.
    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.
    Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
    Invia commenti
    Riquadri laterali

    50025
    €122.95
    Out of stock
Set Ascending Direction

Items 1-48 of 57

Page




ecommerce sicuro