custom knives

Type of Production: Handcrafted
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Black Micarta
Blade Length: 118 mm
Blade Thickness: 5mm
Total Length: 240mm
Balance: Rearward, approximately 2 cm
Weight: 274g
Sheath: Thermoformed Kydex, with Tek-Lok type attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors, and materials compared to the photographed product

Use: EDC / Light Utility / All Round

Type of Production: Handcrafted
Country of Production: Italy
Blade: Integral, D2 steel at 59/61HRC
Blade Treatment: -
Handle: Micarta
Blade Length: 100mm
Blade Thickness: 5mm
Total Length: 205mm
Balance: Rearward
Weight: 214g
Sheath: Thermoformed Kydex, with tek-lok attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors, and materials compared to the photographed product

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended use: collectible/sporting/military

Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshop

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting

Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting/Tactical

Production Type: Mid-Tech
Country of Production: USA
Blade: stainless steel CPM-S35VN
Blade finish: PVD
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: PVD titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade finish: Marble Gun Coated
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: advanced
Weight: 293g.
Sheath: in Kydex, thermoformed, with belt loop compatible with M.O.L.L.E.
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

Intended Use: Light Utility

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 234mm.
Balance: backward
Weight: 214g.
Sheath: made of thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by certificate of guarantee and authenticity,
Notes: handcrafted knife

Intended use: collection/sporting

Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available No.
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted and hand-stitched
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Accredited Member C.I.C. (Corporazione Italiana Coltellinai) Livio Montagna. 

Intended use: bushcraft / utility

Type of production: handcrafted
Country of manufacture: Italy
Blade: RWL34 steel
Blade finish: satin-finished
Handle: micarta with 416 stainless steel cotter
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Weight: 230g.
Scabbard: handcrafted, leather, hand-stitched
Packaging: unwrapped, comes with certificate of authenticity and warranty
Notes: previously purchased knife, from a private collection, "homage" to the Bayley S4 knife, designed and handcrafted by Rob Bailey, famous for being used by Bear Grylls during his first TV appearances, before he made business deals with Gerber.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Knife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.

Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -

The Wander Tactical Lynx knife is an excellent option for anyone looking for a robust and reliable knife. The blade is made of D2 steel, which offers good resistance to wear and corrosion. The length of the blade is approximately 10cm and has a clip point shape, making it ideal for many outdoor activities.

The handle of the knife is made of micarta, a resistant and non-slip material that offers excellent grip even in humid or sweaty conditions. The length of the handle is approximately 12cm which gives a good balance to the knife, making it easy to handle and control.

The Lynx knife comes with a Kydex sheath, which protects and keeps it safe during transport. In addition, the cover can be easily attached to a belt or trousers thanks to its quick fastening system.

Overall, the Wander Tactical Lynx knife is an excellent choice for anyone looking for a reliable and durable knife for outdoor activities. With its sturdy blade, non-slip handle and Kydex sheath, the Lynx knife is a very attractive option for hikers, campers and outdoor enthusiasts.

Intended use: utility / bushcraft

Type of Production: Artisanal
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backwards
Weight: 260g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcrafted

Intended use: Utility / Collection

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backwards
Weight: 318g.
Sheath: in kydex
Packaging: without packaging - supplied with Wander Tactical certificate of authenticity and guarantee
Notes: Each knife is unique and handcrafted, custom version with WT and DP hallmark; there may be slight differences in finishes, colors and materials compared to the product photographed.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Collection / Vintage

Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in mint condition - year of manufacture 1997
* Sharpening: Factory
* Marks on blade: None
* Signs on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: without certificate
* Checked and Certified by our internal laboratory

Intended use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì with Scrimshaw (wolf's head) by Mirella Pachì
Blade production: Italy
Blade: ATS-34 stainless steel
Handle: in desert ironwood with insert in mammoth fossil ivory with handcrafted scrimshaw depicting a wolf's head
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 235mm.
Weight: 215g.
Sheath: in handmade leather
Packaging: Pachì cordura pocket
Note:

Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition
* Commercially available Unique specimen made in 2008.
* Sharpening: Original, with a few small marks from use.
* Marks on blade: A couple of small marks.
* Marks on handle: A couple of small abrasions on titanium folder.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended Use: Collection 

Production type: custom
Country of production: Denmark
Blade: handcrafted and beveled, stainless steel RWL-34
Blade treatment: dual tone: stone washed and handcrafted satin finish
Handle: micropallinated titanium and carbon fiber
Blade length: 107mm.
Blade thickness: 4mm.
Length closed: 137mm.
Total length: 245mm.
Thickness when closed: 15mm.
Weight: 215g.
Closure: Framelock
Clip: Removable, anodized titanium
Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing opening

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade finish: Marble Gun Coated
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: advanced
Weight: 293g.
Sheath: in Kydex, thermoformed, with belt loop compatible with M.O.L.L.E.
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory

Intended Use: Regional Italian / Collection

Type of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like new

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: set back
Weight: 274g.
Sheath: in kydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 98mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 187g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Ice Brush Tiger
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 264g.
Sheath: in ckydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences

Intended use: Utility / Collection

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 238mm.
Balancing: set back
Weight: 293g.
Sheath: in Kydex
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab. 

Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.

Intended use: hunting/collecting

Type of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good condition

Knife collected from a private collection in like new condition with original box - Knife made in 2017 by the famous Japanese knifemaker Takeshi Saji - The knife is supplied together with the sheath made by Saji, with an additional sheath made by the Italian cutler Simone Tonolli. This second sheath allows horizontal attachment to the belt. Checked and certified by our internal laboratory.

Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.

Intended use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, Yoshoku laminated damask with Hitachi Aogami cutting edge at 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closure: -
Clip: -
Sheath: two leather sheaths, one produced by Takeshi Saji for vertical positioning and one made by the Italian knifemaker Simone Tonolli for horizontal fixing
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji

Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.

Intended use: hunting / collection

Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:

Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.

"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.

Intended Use: utility / bushcraft

Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcrafted

Knife withdrawn from a private collection. Condition like new, production dating back to 2005 supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.

Randall's Model 11 features a serrated top blade for thumb placement. From a leather handle of about 11 cm equipped with a duralumin bottom. The drop-point blade was designed in 1952 by Tommy Thompson, a well-known Alaska guide. Excellent blade for skinning large game.

Intended use: hunting / collection

Type of production: artisanal
Production Lama: america
Blade: stainless steel
Blade treatment: -
Handle: leather and brass discs
Blade length: 105mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 225mm.
Balance: set back, at 2cm.
Weight: 163g.
Closure: -
Clip: -
Sheath: Leather
Note:

Intended Use: Utility / Collection

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Black Blood
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total lenght: 235mm.
Balance: backward
Weight: 271g.
Sheath: thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Package: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by hand

Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: Collection 

Kind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.

Destinazione d'uso: Utility / Collezione

Tipo di produzione: Artigianale
Paese di produzione: Italia
Lama: in acciaio D2 a 59/60HRC
Trattamento lama: Raw
Manicatura: Micarta
Lunghezza lama: 105mm.
Spessore lama: 6mm.
Lunghezza totale: 235mm.
Bilanciatura: arretrata
Peso: 319g.
Fodero: in cuoio marrone
Confezione: privo di imballo - fornito con certificato di originalità e garanzia Wander Tactical
Note: Ogni coltello è unico e realizzato artigianalmente; possono esserci leggere differenze di finiture, colori e materiali rispetto al prodotto fotografato.

Intended use: Tactical / EDC

Type of production: semi artisanal
Country of production: USA
Blade: CPM-S35V steel
Blade treatment: Black PVD
Handle: anodized titanium with a thickness of 3.5mm per folder
Blade length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: Ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: in titanium, removable
Packaging: tactical case in polymer with Medford logos
Notes: Skull Crasher on Shank - Designed and built by Greg Medford

handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.

Intended use: collection / hunting

Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsman

Intended Use: Utility / Collection

Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 105mm.
Blade thickness: 6mm.
Total length: 235mm.
Balance: backward
Weight: 319g.
Sheath: brown leather
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Use: Tactics / collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: gun cote heart
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT Limited Exclusive Project - Single Edge - Wander Tactical Certified

Intended Use: Utility / Collection

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total lenght: 235mm.
Balance: backward
Weight: 289g.
Sheath: Kydex
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

Tryceratops model .:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Use: Tactics / collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: dual tone
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT exclusive project limited to 5 pieces - single edge - Wander Tactical certified

Intended use: Utility / Collection

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Washed
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balancing: set back
Weight: 289g.
Sheath: in leather
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balancing: backward
Weight: 260g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed.

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the type of foreign steel and the laminated structure.

Tryceratops Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbonaceous) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: backward
Weight: 184g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SCRAMBLER Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

Lynx Model:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 107mm.
Blade thickness: 6.5mm.
Total length: 237mm.
Balancing: backward
Weight: 310g.
Sheath: brown leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Intended use: Tactical / Collection

Type of production: Midtech
Country of production: Usa
Blade: in D2 steel
Blade treatment: Black PVD
Handle: G10 and titanium liners 6AL4V
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 230mm.
Thick when closed: 15mm.
Balancing: on the guard branch
Weight: 214g.
Closure: Liner Lock
Clip: in Black PVD stainless steel
Sheath: nylon case with zip
Packaging: cardboard box with Medford logos
Notes: Designed and built by Greg Medford

Intended use: Tactical / Collection

Type of production: Midtech
Country of production: Usa
Blade: in D2 steel
Blade treatment: Black PVD
Handle: G10 and titanium liners 6AL4V
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 230mm.
Thick when closed: 15mm.
Balancing: on the guard branch
Weight: 214g.
Closure: Liner Lock
Clip: in Black PVD stainless steel
Sheath: nylon case with zip
Packaging: cardboard box with Medford logos
Notes: Designed and built by Greg Medford

Intended use: collection / sports

Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 145mm.
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closing: -
Clip: -
Sheath: -
Packaging: rigid package with artisan production certificate signed by Antonio Deroma
Note: -

The Lynx is designed to satisfy all users in the 'scope of the Hunt, the Bushcraft and Survival. Thickness and dimensions have been studied to facilitate precision work and at the same time be reliable even for heavy work. Handy and compact, it is the perfect companion for the outdoors.

Intended use: Utility / Collection

Type of production: Custom
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: GunKote Raw Dual Tone
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balancing: set back
Weight: 318g.
Sheath: leather, ambidextrous
Packaging: no packaging - supplied with a certificate of originality and Wander Tactical guarantee
Notes: Each knife is unique and handcrafted; there may be slight differences in finish, color and materials with the product shown in the photo.

Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.

Intended use: Collection

Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001

Intended use: Tactical / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN 61 / 62HRC stainless steel
Blade treatment: stonewashed
Handle: titanium and G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Total length: 234mm.
Weight: 220g.
Closure: FrameLock
Clip: titanium, removable
Notes: custom version with screws and accessories in anodized bronze titanium

Additions compared to the standard model:
* Pivot screw in bronzed titanium
* 3 front screws in bronzed titanium
* 3 spacers in bronzed titanium
* Rear stabilizer lockbar in bronzed titanium
* Clip in bronzed titanium
* Clip cover in bronzed titanium

Model winner of the 2016 Blade Show as "American Made Knife of the Year"

The model photographed is the Limited Edition 2019

After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.

Intended use: Collection / Sports
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Washed
Handle: titanium 6AL-4V
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 125mm
Total length: 225mm.
Weight: 168g.
Closure: FrameLock
Clip: in anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey - 2019 limited edition anodized with engravings

Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.

Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.

Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.

Intended use: collection

Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collection

Intended use: Tactical / EDC

Type of production: artisan seeds
Country of production: U.S.A.
Blade: in S35VN steel
Blade treatment: satin finish
Handle: lighting
Blade thickness: 4mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balancing: set back
Weight: 104g.
Opening: pinball
Washers: in brass
Closure: button lock
Clip: titanium, removable
Packaging: in cardboard with Medford logos
Note: -

Intended use: collection / sport / military

Type of production: artisan
Country of production: South Africa
Blade: stainless steel N690Co
Blade treatment: dual tone satin
Handle: titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Length closed: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balancing: 2cm back from the guard branch
Weight: 212g.
Opening: Flipper type on ball bearings
Closure: FrameLock
Clip: titanium anodized, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Black
Handle: Black titanium
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Rescue knife made by Wander Tactical in collaboration with Collini Cutlery and SICS, Italian Rescue Squad.

Use: Rescue / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Iron Wash
Handle: about 4 meters of Paracord
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 124g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique with certificate, numbered and with official logos SICS Italian Squad Rescue Dogs

Rescue knife made by Wander Tactical in collaboration with Collini Cutlery and SICS, Italian Rescue Squad.

Use: Rescue / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Iron Wash
Handle: about 4 meters of Paracord
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 124g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique with certificate, numbered and with official logos SICS Italian Squad Rescue Dogs

Rescue knife made by Wander Tactical in collaboration with Collini Cutlery and SICS, Italian Rescue Squad.

Use: Rescue / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Iron Wash
Handle: about 4 meters of Paracord
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 124g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique with certificate, numbered and with official logos SICS Italian Squad Rescue Dogs

Intended use: collection / sport / military

Type of production: artisan
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thick when closed: 14mm.
Balancing: on the guard branch
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Closing: FrameLock with additional cursor lock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Intended use: collection / sports / military

Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Satin
Handle: Dual Tone titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De Villiers

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: -
Handle: Paracord
Blade length: 97mm.
Blade thickness: 6.5mm.
Total length: 204mm.
Balancing: set back
Weight: 170g.
Sheath: in Kydex, thermoformed, with tek-lok type connection
Package: -
Notes: Limited edition single piece

In collaboration with Wander Tactical we decided to propose one of their most iconic knives, the Tryceratops model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Application: outdoor / hunting

Type of production: handmade
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.8mm.
Overall length: 130mm.
Balancing: backward
Weight: 210g.
Sheath: Kydex, thermoformed, with Tek-Lok system
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Knife born from the collaboration between Wander Tactical and Safer Faster Defense

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balancing: set back
Weight: 235g.
Sheath: Kydex, thermoformed, with tek-lok attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed - Limited edition of 5 pieces

Type of production: handmade
Production Country: Italy
Blade: D2 steel 59 / 60HRC
Treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.5mm.
Overall length: 220mm.
Balancing: backward
Weight: 338g.
Sheath: Kydex, thermoformed, with Tek-Lok attack
Packaging: -
Notes: Each knife is unique and handmade; there may be slightly different from the one shown in the pictures

Intended use: collection / sport

Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De Villiers

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -