Fallkniven
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LWFallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmaxFallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDCFallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDDFallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbmFallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2ZFallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XFallkniven - F1x Pilot Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -F-F1XFallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1XFallkniven - FS3 FlipStone - Affiatore Ceramic and Diamond Pocket
Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .
Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .
The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .
The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.
Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel
Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .
Quality level : HighF-FS3Fallkniven - DC4 - Sharpener Ceramic and Diamond - Stone
Dry stone for sharpening ceramic grain with one hand and with one side to the 6000 diamond 25 micron (600 grit) to fine-grained. Size of 32x100 mm.
And 'accompanied by a convenient and robust black leather case and is the ideal size and weight to carry always with you on a hike to quick but effective sharpening field.
Quality: very good
F-DC4Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BLFallkniven - PXL Work Horse - knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel, three-layer laminate (VG2 and CoS to 60 HRC)
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length 111mm.
Total length: 197mm.
Thick when closed: 24mm.
Balance: -
Weight: 170g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Fallkniven
Notes: -F-PXLWHFallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1ZFallkniven - TK3 knife - Jigged Bone - coltello
Destinazione d'uso: sportivo
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Sweden
Manicatura: Acciaio Inox 420J2 e Cervo Ambrato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 95mm.
Lunghezza totale: 165mm.
Bilanciatura: -
Peso: 100g.
Chiusura: Back Lock
Clip: -
Fodero: Nylon
Note: -F-TK3JBFallkniven - A1 Pro knife - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection. Fallkniven A1 Pro model in a configuration no longer in production from 2020 - Overall in very good condition. Complete with slipcase and cardboard box. Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: Hiking / Hunting
Blade: hidden tang, in 60HRC CoS laminated stainless steel
Handle: Thermorun, with stainless steel guard
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 365g.
Sheath: in zytel
Notes: cardboard box with Fallkniven logos, ABS watertight box with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseAP-A1PRO-CPFallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmaxFallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLeyFallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3GicFallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -F-RL1EYFallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-ScoutFallkniven - NL5 - Idun knife - PRIVATE COLLECTION - knife
Withdrawn from a private collection - with original box - knife in excellent condition, with some small marks on the blade - slightly damaged and marked leather sheath (as shown in photos) - Checked, sharpened and certified by our in-house laboratory.
Fallkniven from Sweden - Idun (Celtic deity of fertility and youth) is a very compact model with excellent finishes, perfect for hunting use - The knife is handcrafted using only top quality materials
Intended use: collection / Survival
Type of production: Industrial
Production Lama: Japan
Blade: full tang in San-Mai VG-10 / 420J2 59HRC stainless steel
Handle: rings in Ox-Hide (ox skin) E
Blade length: 100mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 220mm.
Thick when closed: -
Balancing: -
Weight: 170g.
Closure: -
Clip: -
Sheath: in leather, of fine workmanship and sturdiness.
Packaging: cardboard box
Note:AP-FAL-IDFallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DIFallkniven - Survival knife S1 Pro - Knife
Intended Use: Hiking / Hunting
Blade: hidden tang, in CoS to 60HRC rolled stainless steel
Handle: Thermorun, with guard in stainless steel
Blade length: 130mm.
Blade Thickness: 7mm.
Overall length: 247mm.
Balancing: Advanced to 0.5cm. the branch of the lower guard
Weight: 268g.
Sheath: Zytel
Notes: cardboard box with Fallkniven logosF-S1PROFallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1ZFallkniven - U2 knife Zytel - Sagittarius Edition - Knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Japan
Blade: San-Mai SGPS 62HRC stainless steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 150mm.
Thick when closed: 11mm.
Weight: 42g.
Opening: Two-handed
Closure: Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fallkniven logos
Notes: Special edition: the constellation of Sagittarius is engraved on the bladeF-U2SAFallkniven - H1 Zytel knife - CoS steel - knife
Available only with Zytel sheath - discontinued leather sheath
Intended use: hunting
Type of production: Industrial
Production Lama: Japan
Blade: full tang in San-Mai CoS / 420J2 59HRC stainless steel
Blade treatment: -
Handle: Thermorun E
Blade length: 100mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 215mm.
Thick when closed: -
Balance: set back, at 2cm.
Weight: 188g.
Closing: -
Clip: -
Sheath: in Zytel
Packaging: white cardboard box with Fallkniven logos
Note: -F-H1Fallkniven - U2 knife Zytel - Aquarius Edition - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Japan
Blade: San-Mai SGPS 62HRC stainless steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 150mm.
Thick when closed: 11mm.
Weight: 42g.
Opening: Two-handed
Closure: Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fallkniven logos
Notes: Special edition: the constellation of Aquarius is engraved on the bladeF-U2AQFallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2ZFallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1ZFallkniven - U2 Zytel - Pegasus Edition - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Japan
Blade: San-Mai SGPS 62HRC stainless steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 86mm.
Total length: 150mm.
Thick when closed: 11mm.
Weight: 42g.
Opening: Two-handed
Closure: Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fallkniven logos
Notes: Special edition: the constellation of Pegasus is engraved on the bladeFK-U2PeFallkniven - PD knife 35 years - SGPS 67 layer steel - Ironwood - knife
Intended use: collection
Type of production: industrial
Blade: 67-layer laminated steel (VG2 and SGPS "Super Gold Powder Stainless Steel" at 62 HRC)
Blade treatment: -
Lama production: Japan
Handle: 420J2 Stainless Steel and Ironwood
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 180mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: Nylon
Notes: Limited Edition to celebrate the 35th anniversary of FallknivenF-PDFallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2LFallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XBFallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XBFallkniven - F1xb Pilot Knife black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -F-F1XBFallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MBFallkniven - Survival F1 Pro - knife
Intended Use: Hiking / Hunting
Blade: hidden tang, in CoS to 60HRC rolled stainless steel
Handle: Thermorun, with guard in stainless steel
Blade length: 100mm.
Blade Thickness: 7mm.
Overall length: 215mm.
Balancing: Advanced to 0.5cm. the branch of the lower guard
Weight: 178g.
Sheath: Zytel
Notes: cardboard box with Fallkniven logos, watertight box in ABS with Fallkniven logos, sharpening stone Fallkniven DC4 with leather pouchF-F1PROFallkniven - F1 Pilot Survival Desert 3G - knife
Fallkniven - F1 Pilot Survival Desert 3G - knife
Intended use: tactical / military / hunting
Blade: full tang stainless steel black laminate CoS to 62HRC
Handle: E Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Overall length: 215mm.
Balancing: back 2.5 cm from the branch of the lower guard
Weight: 150g.
Closed: -
Clip: -
Sheath: kydex
Notes: Official knife of the Swedish Air Force pilots from 1995F-F1DZFallkniven - PXL Loveless Micarta - knife
Fallkniven - PXL Loveless Micarta - knife
Type of production: Industrial
Production Lama: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 SGPS and "Super Gold Powder Stainless Steel" to 62 HRC)
Blade treatment:
Handle: Micarta Green, heads of stainless steel
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Overall length: 197mm.
Thick when closed: 24mm.
Balancing: -
Weight: 178g.
Lock: Liner Lock
Clips: stainless steel
Sheath: -
Packaging: cardboard box with Fallkniven logos
Notes: each piece is numberedF-PXLGMFallkniven - GP CoS Cocobolo - knife
Intended use: Hunting / Sports
Type of production: Semi-Craft
Production Blade: Japan
Blade: stainless steel laminate CoS
Treatment Lama: -
Handle: Cocobolo
Blade length: 78mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 19mm.
Balance: -
Weight: 97g.
Lock: Liner Lock
Clip: -
Sheath: -
Packing: Wooden case
Notes: -F-GPGMFallkniven - FH9MOP - Mother of Pearl - Coltello
Destinazione d'uso: sportivo
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Testine in acciaio inox 420J2 e madreperla con abalone
Lunghezza lama: 67mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 158mm.
Peso: 88g.
Chiusura: Lockback
Clip: -
Note: -F-FH9MOPFallkniven - FH9BH - Black Hawk - Coltello
Destinazione d'uso: sportivo
Tipo di produzione: industriale
Lama: Acciaio Inox CoS laminato a tre strati a 60HRC
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Testine in acciaio inox 420J2 e micarta nera
Lunghezza lama: 67mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 158mm.
Peso: 84g.
Chiusura: Lockback
Clip: -
Note: -F-FH9BHFallkniven - Erna SK18 - BBQ Chef 18cm - professional kitchen knife
Recommended use: Barbecue, Vegetable, Raw Meat, Fish
Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked FallknivenF-SK18Fallkniven - PC - Folding Concept - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Japan
Blade: stainless steel, three-layer laminate (VG2 and CoS to 60 HRC)
Treatment Blade: -
Handle: Grilon
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length 100mm.
Overall length: 174mm.
Thick when closed: 12mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Fallkniven
Notes: -F-PC