Wine Accessories, Kitchen Tools and Silicone Products | Coltelleria Collini

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

 

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

Mercer Culinary - Spherification Spoon The perfect addition to any mixologist's toolbox, this spoon allows you to easily scoop and strain flavorful garnishes created with the innovative, spherification technique. It's sure to be an essential, go-to tool for bartenders at trendy bars and restaurants. Regardless of the type of cocktail that's being created, Barfly Mixology Gear by Mercer Culinary is the top choice of professionals everywhere. Deep Bowl and Large Perforations While its deep bowl holds an ample capacity, its 1/8" perforations ensure quick, efficient draining. Use it to add small and large spheres to your drinks for added visual appeal and bursts of mouth-watering flavor. Built for those with an unwavering dedication to the art of crafting cocktails, Barfly Mixology Gear by Mercer Culinary products are made to deliver the best appearance, temperature, consistency and proportion in each and every glass. 6 3/4 (17.1 cm) Stainless Steel Item No. M35162 Accommodates small (caviar) and large (ravioli) spheres 1/8” Perforations for quick draining 18-8 Mirror-finish stainless steel Deep well bowl for greater capacity Balanced design for easier use

4.25-Inch Straight Spatula by Mercer Culinary No matter what you have to ice, decorate, or smooth, Mercer Culinary has a spatula the size and shape you need for the job. This 6-Inch Straight Spatula is perfect for spreading frosting evenly over the sides of a cake. The blade is made of precision-ground stainless steel to provide perfect flexibility, while the molded polypropylene handle gives you a sure grip. At 4.25” it’s ideal for frosting the sides of a single 2-4” high cake. If you just haven’t been able to produce a beautifully frosted cake, try this commercial Straight spatula by Mercer Culinary—you’ll see what difference perfect flexibility makes! Mercer Culinary 4.25” Straight Spatula Details Precision-ground stainless steel blade Provides the ideal flexibility Straight design for frosting the sides Molded polypropylene handle for a sure grip NSE certified Designed for spreading, smoothing, and detailed work Easily maneuvers around rounded or square edges Dishwasher safe Blade dimensions: 4.25” x 0.75" Item #: M18840P

The Claw Ice Chipper by Barfly Break down large ice blocks and hand-carve ice balls with The Claw Ice Chipper by Mercer Barfly. Precision-formed prongs have sharp points for greater efficiency, so you can serve that on-the-rocks drink in 2 minutes flat. The handle has a rubberized grip to keep even wet hands from slipping, and an integral hanging hole gives you storage options. For ice carvers and serious mixologists who craft their own ice balls, The Claw Ice Chipper will be a permanent addition to your kit. Barfly Mixology Gear – The Claw Ice Chipper Features: Ultra heavy-duty cast stainless steel construction Amazingly strong and durable Prongs are precision-formed to sharp points for greater efficiency Rubberized handle for sure grip 8.25” overall length Item #: M37073

The Hammer Ice Pick by Barfly Break down large ice blocks with The Hammer Ice Pick by Mercer Barfly. With ultra heavy-duty cast stainless steel construction, it’s amazingly strong and durable. The hardened blade gives you excellent precision and the end of the handle is designed for scoring ice. The handle has a rubberized grip to keep even wet hands from slipping. For ice carvers and serious mixologists who craft their own ice balls, The Hammer Ice Pick will be a permanent addition to your kit. Barfly Mixology Gear – The Hammer Ice Pick Features: Ultra heavy-duty cast stainless steel construction Amazingly strong and durable Hardened blade for precision Handle designed for scoring ice Rubberized handle for sure grip 7.5” overall length Item #: M37074

Mercer Culinary - Hell's Tools Set 3 pieces These tools are constructed of glass-reinforced nylon specially formulated for use in high-temperature applications (heat resistant up to 430 ° F / 220 ° C). These tools have an incredible durability and are resistant to stains and odors. Their innovative construction not only resists high heat, but is much more delicate on food and cooking surfaces than metal tools. The set consists of a utility tongs, a spoon and a fried spatula. Total length measurements: approximately 30 cm. Black colour. Features: Utility tongs have a monoblock construction, bevelled edges for greater control when picking food and is safe for use on non-stick pans. The mixing spoon has a monobloc construction, it does not damage the non-stick surfaces of the cookware. The grooved spatula has a monoblock construction, a bevelled edge and is safe for use on non-stick pans.

Mercer Culinary - Tasting Spoon/ Fork The only way to ensure the food is any good is to give a test taste. Use the Mercer Taste Tasting Spoon/Fork to make sure you are getting it just right. The utensil features a three tine fork on one end and a spoon on the other. Micro-serrations helps provide secure grip. Crafted with 18/8 stainless steel for quick and easy cleaning and dishwasher safe. - 18/8 Stainless Steel - Length 6-5/8 in -18-8 Stainless Steel -Strategically placed micro-serrations on the outside of tong for improved stability -Dishwasher safe -Compact Design

2" and 2.5" thai fruit carving knife 3.5", 4", and 5" Japanese carving knives 2.5" peeling knife Heavy-duty storage roll NSF certified Limited Lifetime warranty

Mercer Cutlery M15990 Mercer Cutlery 9-Piece Carving Tool Set for creative garnishing. Effortlessly turn fruit and vegetables into attractive, appetizing shapes. Constructed of high carbon, stain-free steel. Handles are a combination of polypropylene and slip-resistant soft grip. Heavy-duty nylon storage roll included.

Plating Spoon kit comes with: Saucier Spoon (M35142) Petite Saucier Spoon (M35143) 9 in. Solid Plating Spoon (M35138) 7 7/8 in. Solid Plating Spoon (M35140) 9 in. Slotted Plating Spoon (M35139) 7 7/8 in. Slotting Plating Spoon (M35141) Heavy Duty 6 slot Roll

Mercer Culinary - 8 Piece Silicone Wedge Plating Kit Entice guests before they take the first bite by using every wedge in this Mercer Culinary M35614 8 piece silicone wedge plating set to elevate your food's presentation. Included are 8 wedges designed to bring variety to your plate while allowing for an endless amount of possibilities. Use each wedge to create a unique design with your best sauce, puree, or coulis. Use Mercer Culinary's convenient color-coded system to quickly and easily identify the right wedge for the job. 8 Piece Silicone Wedge Plating Kit Wedge overall dimensions are 3 ¾" x 2 ½". Wedge tip width is 2 ¼". Set includes: M35606 3mm Graduated Lancet Arch M35607 Saw Tooth M35608 5mm Round Arch M35609 4mm Horseshoe Arch M35610 Angle M35611 Plain M35612 4mm Square Notch - 3 Gaps M35613 5mm Square Notch - 5 Gaps

Perfect size, perfect balance, perfect control. This set of easy-to-use brushes includes 5 different brush-head shapes for 5 choices of sauce or cream stripes. Each brush 7-5/8 inch overall, 3/4 inch width at brush head. Brush head is marked with company name on one side, item number on other side. Cloth bag closes with Velcro straps. High-heat nylon handle. 480F heat-resistant silicone brush head. Slip-resistant-even if wet-handle. Color-coded brush head. Matching color in handle tip to identify brush when head is immersed in liquid.

Anello salvagoccia
Anello salvagoccia non permette ad alcuna goccia di vino di cadere dalla bottiglia e sporcare tavolo o tovaglia.