Wine Accessories, Kitchen Tools and Silicone Products | Coltelleria Collini

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

The "Speedy" corkscrew is made of fine materials: special aluminum alloys and stainless steel, entirely hand-polished and embellished with a special protective treatment such as to obtain different colors, bright and stable over time.
It is characterized by the use of an eccentric pin, movably inserted in the main body and pivoted in the bottle support lever. The combined relative motion between the main body, support lever and screwing worm, allows the length of the lever arm to be changed between the beginning if the end of the extraction action , allowing the bottle cap to be removed smoothly with a single maneuver.
"Speedy" also has a knife with a special ergonomic shape that allows it to be pulled out and put back in place with one hand.

Height: 120 mm.

Width: 17mm.

Thickness: 8mm.

Weight: 56g.

The IBIS : sweet extraction corkscrew is made of high quality materials and precision machining.
In particular, the body is made from solid with numerically controlled machines from special high-strength aluminum alloy, with sucessive brushing and polishing performed by hand.
The screwing worm is machined with patented numerically controlled equipment from a bar of high-strength Titanium alloy.
The IBIS corkscrew is characterized by the use of an eccentric pin,inserted in a movable seat in the main body and pivoted in the bottle support lever. The combined relative motion between the main body, support lever and screwing worm allows the length of the lever arm to be changed between the beginning and the end of the extraction action, allowing the bottle cork to be gently removed in a 'single maneuver.
IBIS : gentle extraction in a 'single maneuver

Height: 36mm

Length: 125mm

Thickness: 12mm

Weight: 94g

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

Artis - TEKNO stopper - wine

The Tekno stopper is made of stainless steel with a hand-polished and anodised aluminium alloy handle in various coloured versions. The Tekno stopper has three sealing gaskets that guarantee maximum adherence to different bottle sizes.

Design: Todeschini

Collection: Tecno

Produced in Italy

Description: Stopper

Dimensions:

Height 123 mm

Width 70 mm

Thickness 20 mm

Weight 100 g

Material: Steel/Aluminium.

Available in colours: black, silver and red.

Artis - The Astacus seafood crackers

The Astacus seafood crackers are refined designer items, easy to handle, hard wearing and a pleasure to use. They are made with fine materials and precision tooling. The levers for instance are in a special aluminium alloy developed for aeronautics, which is then hand brushed and polished. To ensure long-term colour and shine the surface undergoes an anodic oxy-coloration treatment. Thanks to its robust construction and solidity, it's especially good for easily cracking seafood claws.
Order to enable the surface to maintain color and gloss in time a treatment is performed oxy anode. Thanks to their robustness and solidity are particularly effective for easily crush the claws of shellfish.

Dimensions: H 150 mm x W 35 mm x D 14 mm

Weight 85 g

Artis - Corkscrews HIM - wine

   Dimensions: ITALY H 290 mm x W 118 mm x D 50 mm

Weight 275g

The Warbler corkscrew is inserted into the line Artis Light, and like other prestigious objects Artis, is signed by Giuseppe Todeschini.E 'made of thermoplastic material with high characteristics and colorie original finishes.
' Embellished by the typical technology Artis: the group rack screw mechanism is made of spring steel high strength, ricavatodal full, using numerical control machines with equipment patented and protected the surface by appropriate galvanic coating.
lightness, elegant lines and the essentiality Warbler make the corkscrew a very attractive object, simple to use and pleasing to the enrichment of the environment.
available colors:emerald green, orange and violet. >

The Kaiman Nutcracker is a classic and elegant nutcracker made of stainless steel.

Compared with other nutcrackers, the Kaiman can also be used to open champagne bottles.

In order not to take up too much space when storing it, it is held together by a magnet.

To open it, simply overcome the initial holding force of the magnet, then the pliers open via a spring.

Quality down to the last detail!

Made of stainless steel.

Recommended use: nutcracker and champagne pliers

Country of manufacture: Italy

Material: Stainless steel

Length: 21cm

Width: 6.3cm

Thickness: 1cm

Weight: 250g.

Package: Cardboard box

Artis - The sommelier corkscrew Ibis

The corkscrew Ibis: sweet extraction is made with high quality materials and precision machining. Man In particular, the body is made from solid with CNC machines in special aluminum alloy high resistance, followed by a subsequent brushing and polishing done by hand.
The screw mechanism is made with patented equipment numerically controlled by a bar of titanium alloy high strength.
corkscrew Ibis It is characterized by the use of an eccentric pin, inserted in the movable seat in the main body and hinged in the rest lever of the bottle. The combined movement between the main body, the rest lever and worm, allows to change the length of the lever arm between the beginning and the end of the lifting, allowing to remove the cap of the bottle so sweet with a 'single maneuver.

Height: 36mm

Length: 125mm

Thickness: 12mm

Weight: 94g