Wine Accessories, Kitchen Tools and Silicone Products | Coltelleria Collini

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

 

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

Anello salvagoccia
Anello salvagoccia non permette ad alcuna goccia di vino di cadere dalla bottiglia e sporcare tavolo o tovaglia.

Monopol - Bottle opener and corker AH-SO MONOPOL Two-Prong Cork Puller AH-SO, chrome-plated MONOPOL Two-Prong Cork Puller AH-SO, chrome-platedWaiter's friend, super fine polished, satin-finished, two hardened steel prongs embrace the cork, without damaging it, thus ideal also for brittle corks. MONOPOL offers a specially sharpened cutting thread. The cutting thread “cuts” its way softly through the cork and does not press it apart. A breakage of the cork when pulling it out is almost impossible because of the wide, flat pulling surface of the thread. Two hardened steel prongs embrace the cork Thus ideal also for brittle corks With decorative casing With cap opener Dimensions: 4.33 inches x 2.55 inches x 0.39 inches Weight: 70 g Material: handle zinc-die casting, chrome-plated Casing steel chrome-plated Steel-prongs Manufacturer Art.-No.: 6285556C How to use and to care: First enter the longer prong between cork and bottle neck. Then apply twisting downwards movement until the handle touches the top of the bottle. By simultaneous turning and pulling the cork can easily be removed from the bottle. It is also possible to re-cork the bottle using the Ah-So following the steps in the opposite way round. The steel prongs are factory-wise treated with a foodfriendly grease and should be lubricated again from time to time with a drop of cooking oil. Please wipe Ah-So dry after every use.