bing

italian regional knives

Set Ascending Direction

6 Items

  1. Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife

    This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

    Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
    Very robust and suitable for all jobs


    Handle: ox horn
    Blade: 440A Steel
    Total length: 16 cm
    Blade length: 7.5 cm

    50075
    €131.15
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
    Out of stock
  2. Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife

    Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.

    The shape reached today derives from ancient styles used in past times.

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox wood
    Blade length: 85mm.
    Blade thickness: 2mm.
    Length closed: 115mm.
    Total length: 205mm.
    Weight: 50g.
    Closing: without lock
    Packaging: cardboard box
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    2448
    €77.04
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  3. Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife

    The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

    Intended use: sports / collection
    Type of production: artisan
    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: Ox horn
    Blade length: 80mm.
    Blade thickness: 2.5mm.
    Length closed: 105mm.
    Total length: 185mm.
    Weight: 63g.
    Closing: without blade lock
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    RAB18
    €122.95
    Only 0 left
    Only 0 left
    Out of stock
  4. Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife

    Roman Ring with polished horn cattle R-RMC30A - knife

    Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

    Intended Use: Collection

    Type of production: craft
    Blade: carbon steel
    Treatment Blade: -
    Production Blade: Italy
    Handle: Horn Cattle Etched
    Blade length: 130mm.
    Blade Thickness: 2.5mm.
    Closed Length: 160mm.
    Overall length: 290mm.
    Balancing: -
    Weight: 106g.
    Closure: Without Rear Blade
    Clip: -
    Sheath: -
    Notes: -

    R-RMC30A
    €286.07
    Out of stock
  5. Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife

    Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

    Type of production: artisan

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: bovine horn
    Blade length: 90mm.
    Blade thickness: 2.5mm.
    Length closed: 110mm.
    Total length: 200mm.
    Weight: 70g.
    Closing: without spring
    Packaging: elegant box with Recommendations logos
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

    0260
    €151.64
    Only 0 left
    Only 0 left
    Out of stock
  6. Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife

    This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

    Lama production: Italy
    Blade: X50CrMoV15 stainless steel
    Blade treatment: -
    Handle: ox horn
    Blade length: 70mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 243mm.
    Weight: 76g.
    Closing: without lock
    Packaging: cardboard box
    Sheath: fabric case

    Craftsmanship is beautiful because it is varied

    The colors of the materials with which the handmade products are made may vary from those shown in the images.

    Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

    7161
    €75.41
    Only 0 left
    Only 0 left
    Rating:
    87%
    4.4
    Out of stock
Set Ascending Direction

6 Items





ecommerce sicuro