japan Knife

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fascinating knife used by the Japanese farmer "Higonokami kanekoma."

As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.

The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.

Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leather

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019

Intended use: Collection / Sports

Type of production: Artisan
Lama production: Japan
Blade: Forged by hand, in Hitachi Shirogami 64HRC carbon steel
Blade treatment: -
Handle: traditional Japanese bamboo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: -
Total length: 215mm.
Thickness when closed: -
Balancing: -
Weight: 80g.
Closure: -
Clip: -
Sheath: bamboo wood
Packaging: Carton box
Notes: entirely handmade by Takeshi Saji

Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.

Uso previsto: Colección / Deportes

Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Hara

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Intended use: hunting / collection

Production Type Semi-Handmade
Blade: stainless steel M.V.S. 8 (AUS-8)
Country of production: Japan Seki
Handle: wood and leather rings, with knob and guard in mirror polished alpaca
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 210mm.
Weight: 172g.
Sheath: leather, hand-stitched
Packaging: cardboard box with Hiro logos
Notes: Knife in 1992, again, in perfect condition

Hikari Japan - Higo Folder Desert knife - HK105 SD2 - knife

production: Japanese semi-industrial
Blade: carbon steel D2
Handle: steel and G10 Desert
Closing: liner lock
Length closed: 110mm.
Blade length: 94mm.
Blade thickness: 4mm
Overall length: 215mm
Weight: 162g.
Notes: -
Packaging: cardboard

Hikari Japan - Higo Folder Black knife - HK105 SD2 - knife

production: Japanese semi-industrial
Blade: carbon steel D2
Handle: steel and G10
Closing: liner lock
Length closed: 110mm.
Blade length: 94mm.
Blade thickness: 4mm
Overall length: 215mm
Weight: 162g.
Notes: -
Packaging: cardboard

Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife

Kiku Matsuda is a great fisherman and model Momose Gawa is his favorite for fishing in the river.

Intended use: Sport / Fishing

Type of production: Artisan
Production Lama: Japan
Blade: stainless steel 14C28N
Treatment Lama: acid
Handle: Black Canvas Micarta
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG Knives

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife

Charming knife used by the Japanese farmer " Higonokami kanekoma ."

As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.

The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .

It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .

production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: SanMai steel with sharp stainless steel VG-10 at 59 / 60HRC and external chevron damask with 33 layers nickel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Handle material: Burl quince (apple quince)
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 2019