Knife - Essential Tool for Camping, Outdoor Adventure and collection
-
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Brian Tighe and Friends - Tighe Fighter Large knife Blackwash Grey Aluminum Flipper - 1100-3BG - knife
Intended use: collection
Type of production: mid tech
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Blackwash
Handle: Aluminum
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Weight: 128g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: in cardboard with Brian Tighe and Friends logos, Design by Brian Tighe, opening system on IKBS type ball bearings with Carson Flipper type openingBT-1100-3BG -
Brian Tighe and Friends - Tighe Fighter Large Fixed Carbon Fiber - 1104-1 - knife
Destination of use: collection
Type of production: mid tech / semi-custom
Country of production: USA
Blade: 154CM stainless steel
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 124mm.
Blade thickness: 6.3mm.
Total length: 254mm.
Balancing: on the guard branch
Weight: 220g.
Sheath: Kydex
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe
Notes: numbered seriesBT1104-1 -
Brian Tighe and Friends - Tigers Fighter Large knife G10 Flipper - 1100-3 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: 154CM stainless steel
Lama treatment: Satin
Handle: G10
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Balancing: -
Weight: 134g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1100-3 -
Brian Tighe and Friends - Tighe Breaker Small Integral Pinball - 1202-1 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: CPM S30V stainless steel
Lama treatment: Satin
Handle: titanium
Blade length: 84mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 204mm.
Thick when closed: 12mm.
Balancing: -
Weight: 114g.
Closing: Plunge Lock
Clip: titanium
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1202-1 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Mission - MPK10-Ti Half Serrated - Coltello
Destinazione d'uso: Tattico/Sub
Tipo di Produzione: industriale
Lama: in Titanio Beta con finitura micropallinata
Produzione Lama USA
Manicatura: Hytrel
Lunghezza lama: 140mm.
Spessore della lama: 6.3mm.
Lunghezza totale: 267mm.
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: in Hytrel
Confezione: scatola di cartone con loghi Mission
Note: -10857€409.02Only -99 leftOut of stock -
Mission - MPU7-TI - coltello
ATTENZIONE: DISPONIBILE SOLO CON FILO SEGHETTATO
Mission Knives and Tool è una piccola compagnia americana nata con lo scopo di proporre sul mercato coltelli non tanto famosi per il loro design ricercato quanto per gli innovativi materiali utilizzati.
I loro prodotti sono subito risultati estremamente resistenti tanto da meritare un U.S. Government National Stock Number (NSN 1386-01-417-1263)per il coltello MPK12-Ti e destare l'immediato interesse di reparti speciali militari quali SEAL, SWAT,USMC, USAF, US Coast Guard, FBI e Bomb squads che ne hanno immediatamente richiesto una dotazione.
Vincente è risultato l'utilizzo di Titanio-Beta per le lame che offre vantaggi innegabili rispetto all'acciaio: completa resistenza a ruggine e a corrosione, leggerezza del 40%, totale amagneticità, superiore duttilità, maggiordurezza e flessibilità, biologicamente inerte. Ottima anche la scelta delle manicature in Hytrel caricato con Kevlar che conferiscono leggerezza, ergonomicità e resistenza agli acidi ed alle altissime temperature. Esistono ancheversioni più economiche in acciaio A2 con elevate capacità di taglio e resistenza.
L'MPU è stato realizzato inizialmente per i reparti speciali e per le forze SWAT che avevano necessità di un coltello piccolo, di backup, da legare all'avambraccio o da utilizzare in uno stivale.
Destinazione d'uso: Tattico/Militare/Sub
Lama: full tang in Titanio Beta 45HRC antiriflesso
Manicatura: -
Lunghezza lama: 77mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 180mm.
Bilanciatura: arretrata a 2.5 cm dal ramo di guardia inferiore
Peso: 60g.
Chiusura: -
Clip: -
Fodero: in kydex con agganci Tek-Lok
Note: amagnetico, 40% più leggero dell'acciaio, immune alla corrosione. L'Hytrel è resistente al calore, agliacidi e non conduce elettricità5704€245.08Out of stock