knives made in Italy
-
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
Fox - TRIBAL K Fixed Karambit by Doug Marcaida - FX-803 - Knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-803 -
Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife
The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano RonFX-826 -
Fox - TRIBAL K - Karambit Knife by Doug Marcaida - FX-802
Intended use: Tactical / Collection
Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-802 -
Fox - Spore - mushroom knife - olive wood - FX-409OL - Fungaiolo
Intended use: Mushroom knife
Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo GobbatoFX-409-OL -
ExtremaRatio - K-Talon Karambit - N690 Dark Stone Washed - Knife
The K-Talon is a karambit with a particularly thin full tang structure that, including sheath and grips, reaches a thickness of only 10 mm. The curved, hooked blade is designed inspired by the shape of a claw. It is designed to achieve precise, deep cuts while simultaneously hooking, trapping and/or ripping.
The back ring is designed to achieve a strong and secure grip in all conditions preventing the knife from sliding back and making it exceptionally difficult to disarm or turn against the user.
The very thin Kydex sheath has a quick release and comes with paracord that allows it to be used as a neck knife or attached to MOLLE-system platforms.
Intended use: tactical
Type of production: industrial
Country of production: Italy
Blade: full tang, stainless steel N690Co 58/60HRC
Blade finish: Dark Stone Washed
Handle: anodized anticorodal aluminum
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 175mm.
Weight: 130g.
Sheath: Kydex
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with multi-position, M.O.L.L.E.-compatible attachment systems.ER-KTAL-DS -
Lionsteel - L.E.One Flipper Karambit by Emerson - Green and Chemical Black - LE1 A GB - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Chemical Black
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1AGB -
Lionsteel - L.E.One Flipper Karambit by Emerson - Brown and Stonewashed - LE1 A ES - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1AES -
Antonini Knives - Old Bear mushroom knife Walnut - 9387 / 19_LN - knife
Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle
Type of production: semi artisanal
Production Lama: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: walnut wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closure: viro block
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.AE-9387/19LN -
Antonini Knives - Old Bear Mushrooms knife Olive - 9387/19 - knife
Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle
Type of production: semi-artisan
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: olive wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Length closed: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closing: viro block
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.AE-9387/19LU -
MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGY -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PBK -
Fox - Mini-Ka - Blue Nylon - Sandblasted - FX-535BL - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535BL -
Fox - Mini-Ka - Red Nylon - Sandblasted - FX-535R - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535R -
Fox - Mini-Ka - Orange Nylon - Sandblasted - FX-535O - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535O -
Fox - Mini-Ka - Blue Nylon and Idroglider - FX-535BLB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535BLB -
Fox - Mini-Ka - Orange Nylon and Idroglider - FX-535OB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535OB -
Fox - Mini-Ka - Black Nylon - Sandblasted - FX-535 - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535 -
Fox - Mini-Ka - Red Nylon and Idroglider - FX-535RB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535RB -
Fox - Mini-Ka - Black Nylon and Idroglider - FX-535B - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logosFX-535B -
Fox - Fixed Blade Karambit - G10 Black - FX-598 - Knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co stainless steel
Blade treatment: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 95g.
Sheath: kydex, with belt clips made of synthetic material
Packaging: cardboard box with Fox FKMD logos
Notes: Fixed blade version of the FX-599 folding Mini Karambit modelFX-598 -
Fox - Rescue Karambit G10 UV Yellow - FX-599 RSY - Knife
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Stonewashed
Grip: steel folders, G10 grips sensitive to UV rays
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RSY -
Fox - Rescue Karambit G10 Nero - FX-599 RS - Coltello
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Teflon coating
Grip: steel folders, G10 grips
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RS -
Fox - Black Bird Karambit by Bastinelli and Bram Frank - Black - FX-591 - knife
Purpose: Sportsman / Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Black Idroglider
Handle: G10
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total Length: 170mm.
Closure thickness: 14mm.
Balance: -
Weight: 98g.
Opening: KOR Kinetic Opening Ramp system by Bram Frank
Washers: Brass, with ball bearings
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Sheath: -
Packing: Cardboard box with Fox logos
Notes: Aluminum ring - Design by BastinelliFX-591 -
Fox - Mini Karambit Titanium Framelock - Bronze CeraKote - FX-599TiC - Knife
Target: Tactical / CQC
Type of production: Industrial
Country of production: Italy
Blade: stainless steel Elmax 59/61HRC
Blade treatment: Black Hidroglider
Handle: carbon fiber and bronze CeraKote titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500FX-599TiC -
Fox - Mini Karambit Titanium Framelock - FX-599TiCS - Knife
Target: Tactical / CQC
Type of production: Industrial
Country of production: Italy
Blade: Elmax stainless steel 59/61HRC
Blade treatment: satin finish
Handle: carbon fiber and titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500FX-599TiCS -
Extrema Ratio - Corvo Black - tactical knife
Knife Traditional Chilean army combat, CORVO origins are mysterious, probably arrived in the New World alongside the Spanish Conquistadors who, in turn, had "appreciated" in the war against the Moors. Undoubted affinity with Jambiya, traditional Arab knife still typical accessory menswear Yemeni.
The CORVO, the protagonist of the Pacific War, was realized in many variants the most common of which are the "Corvo Curvo" with a blade that folds almost 90°, version to which we were inspired by the "Corvo Aracameño", longest but with gentle curvature of the blade, which favors more flexibility of use.
Intended use: Tactical Utility
Type of production: Industrial
Country of production: Italy
Blade: 58HRC stainless steel Bohler N690Co
Blade treatment: Browning MIL-C-13924
Handle: Forprene
Blade length: 176mm.
Blade thickness: 6.3mm.
Overall length: 307mm.
Weight: 362g.
Sheath: Nylon compatible with MOLLE system
Packaging: Cardboard box with Extrema Ratio logos12525 -
Maserin - Knife Mushrooms - Olive - 806/OL
Intended Use: Knife Mushrooms
Blade: Stainless steel 440
Handle material: Olive
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 138mm.
Total length: 208mm.
Balance: -
Weight: 95g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: brush hair Exchange - inch and tweezersMA-806/OL -
Fox - Chiroptera Karambit by Derespina - FX-590 - knife
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: Teflonata
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 155mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 110g.
Chiusura: Liner Lock
Clip: Amovibile e reversibile, in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Fox FKMD
Note: Realizzato per Derespina Knives USAFX-590 -
Fox - FKMD - Kuku Hanuman Karambit - FX-636T - PRIVATE COLLECTION - knife
Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: Excellent
Available in the market: No
Sharpening: Original
Marks on the blade: No
Marks on the handle: No
Packaging: Yes
Sheath: In Kydex
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our internal laboratory
Intended Use: Tactical/CQCType of Production: Industrial
Blade Production: Italy
Blade: Full tang in N690Co steel 58/60HRC
Blade Treatment: Teflon Coating
Handle: G-10
Blade Length: 75mm.
Blade Thickness: 4mm.
Closed Length: -
Total Length: 195mm.
Thickness when closed: -
Balance: Backward, at 3cm.
Weight: 170g.
Lock: -
Clip: on the sheath
Sheath: in Kydex
Packaging: Gray cardboard box with Fox logos
Notes: -FX-636T -
Maserin - Champignon Bubinga - 808/LG - coltello per funghi
Lama: in acciaio inox 440A adatta anche per funghi di piccole dimensioni
Manicatura: legno di bubinga
Lunghezza lama: 60mm.
Spessore lama: 2mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 190mm.
Peso: 110g.
Chiusura: molla di ritenzione
Note: Moschettone per trasporto rapido e sicuro - Pennello posteriore in setole naturali di tasso, richiudibile sul manicoMA-808/LG -
Maserin - Champignon Olivo - 808/OL - coltello per funghi
Lama: in acciaio inox 440A adatta anche per funghi di piccole dimensioni
Manicatura: legno di olivo
Lunghezza lama: 6mm.
Spessore lama: 2mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 190mm.
Peso: 110g.
Chiusura: molla di ritenzione
Note: Moschettone per trasporto rapido e sicuro - Pennello posteriore in setole naturali di tasso, richiudibile sul manicoMA-808/OL -
Maserin - Knife Mushrooms - Rosewood - 806/LG
Intended Use: Knife Mushrooms
Blade: Stainless steel 440
Handle material: Rosewood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 138mm.
Total length: 208mm.
Balance: -
Weight: 95g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: brush hair Exchange - inch and tweezersMA-806/LG -
Viper - Boletus - Cattle Horn Tip by Fabrizio Silvestrelli - V5600PC - Mushroom Knife
NOTE: The bovine horn used to make the handle is a natural material; the colorations, shades and veins present may vary from what is displayed in the photo in this product sheet
Intended use: knife for mushroom picking
Type of production: industrial
Country of manufacture: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin finish
Handle: Cattle Horn Tip
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" SilvestrelliV5600PC -
Viper - Boletus Cocobolo Wood by Fabrizio Silvestrelli - V5600CB - Mushroom Knife
Intended use: Knife for collecting mushrooms
Type of production: industrial
Country of Production: Italy
Blade: Nitro B stainless steel
Blade finish: Satin finish
Handle: Cocobolo wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" SilvestrelliV5600CB -
Fox - Spore - mushroom knife - Eucalyptus wood - FX-409 - Mushroom
Intended use: Mushroom knife
Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo GobbatoFX-409 -
ExtremaRatio - K-Talon Karambit - N690 Stone Washed - Knife
The K-Talon is a karambit with a particularly thin full tang structure that, including sheath and grips, reaches a thickness of only 10 mm. The curved, hooked blade is designed inspired by the shape of a claw. It is designed to achieve precise, deep cuts while simultaneously hooking, trapping and/or ripping.
The back ring is designed to achieve a strong and secure grip in all conditions preventing the knife from sliding back and making it exceptionally difficult to disarm or turn against the user.
The very thin Kydex sheath has a quick release and comes with paracord that allows it to be used as a neck knife or attached to MOLLE-system platforms.
Intended use: tactical
Type of production: industrial
Country of production: Italy
Blade: full tang, stainless steel N690Co 58/60HRC
Blade finish: Stone Washed
Handle: anodized anticorodal aluminum
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 175mm.
Weight: 130g.
Sheath: Kydex
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with multi-position, M.O.L.L.E.-compatible attachment systems.ER-KTAL-SW -
Lionsteel - L.E.One Flipper Karambit by Emerson - Black and Chemical Black - LE1 A BB - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to catch on the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Chemical Black
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1ABB -
Lionsteel - L.E.One Flipper Karambit Knife by Emerson - Red and Stonewashed - LE1 A RS - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1ARS -
Lionsteel - L.E.One Flipper Karambit by Emerson - Black and Stonewashed - LE1 A BS - knife
lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.
The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.
Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:
* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.
* Wave: Ernest Emerson's patented system that allows the blade to catch on the pocket of the pants, on extraction, allowing it to open automatically with the right motion.
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst EmersonLS-LE1ABS -
ExtremaRatio - Leucoton Black - knife
Traditional combat knife designed on the basis of the CORVO. Sampling part developed for the Chilean army.
Intended use: Tactical, Utility
Type of production: Industrial
Country of production: Italy
Blade: Bohler N690Co stainless steel at 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 141mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 339g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logosER-LEUCO -
Fox - Black Bird Karambit by Bastinelli and Bram Frank - Grey - FX-591SW - knife
Purpose: Sportsman / Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58HRC
Blade Treatment: Stonewashed
Handle: G10
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total Length: 170mm.
Closure thickness: 14mm.
Balance: -
Weight: 98g.
Opening: KOR Kinetic Opening Ramp system by Bram Frank
Washers: Brass, with ball bearings
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Sheath: -
Packing: Cardboard box with Fox logos
Notes: Aluminum ring - Design by BastinelliFX-591SW -
Bastinelli Knives - Kalinou Karambit - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01 -
Bastinelli Knives - Kalinou Karambit Black - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01PVD -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD -
ExtremaRatio - SKAR Testudo - Karambit Limited Edition - knife
This knife is a Collini Cutlery exclusive edition, the one and only Karambit blade ever made by Extrema Ratio and you will not be able to find it in other stores - This is a very small worldwide limited edition of 50 serialized pieces.
Blade: 58HRC N690Co Testudo Stainless Steel
Country of production: Italy
Handles: Black satin anticorodal
Blade Lenght: 90mm.
Blade Thinckness: 4mm.
Total Lenght: 205mm.
Hole Diameter: 22mm
Weight: 152g.
Sheath: Kydex with Tek-Lok
Notes: Worldwide limited edition, only 50pcs each serializedSKAR-T-KIT -
ExtremaRatio - SKAR - Karambit Collector's Edition - knife
ExtremaRatio - SKAR - Karambit Collector's Edition - knife
SKAR COLLECTOR'S EDITION
Available in only 10 numbered copies (from 1 to 5 in the version black blade and 1 to 5 in the blade clear version), this edition of the Skar Extremaratio is sold in an elegant box in polymers with the version Skar training aluminum.
Intended Use: collection / CQB
Type of production: Industrial, Limited
Blade: stainless steel N690
Treatment Blade: Stonewashed
Production Lama: Italy
Handle: Anticorodal removable grips
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 205mm.
Hole diameter: 22mm
Balancing: back, 2 cm from the branch guard
Weight: 152g.
Sheath: Kydex, thermoformed, connection type Tek-Lok
Notes: Limited edition and numbered with certificate, in only 5 pieces
Housing: plastic, with logos ExtremaRatioFaithful implementation of the 1/1 scale SKAR. Entirely anodized aircraft aluminum, this Karambit is made by Extrema Ratio in collaboration with Cutlery Collini Busto Arsizio.
Free tip and sharp, this knife offers a realistic feeling and maximum safety during training and practice of martial arts that require the use karambit.
Intended Use: Training
Production: Italy
Lama: Aeronautical Aluminum 6061 T6
Treatment: Anodizing
Handle: series comes the paracord to assemble; select the drop down menu under the favorite color! E 'can also purchase the handle in aluminum that are mounted on steel version SKAR.
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 205mm.
Hole diameter: 22mm
Weight: 34g.SKAR-KIT -
BladeTech - Riptide Karambit - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson12063 -
ExtremaRatio - SKAR Testudo - Karambit Limited Edition - knife
This knife is a Collini Cutlery exclusive edition, the one and only Karambit blade ever made by Extrema Ratio and you will not be able to find it in other stores - This is a very small worldwide limited edition of 50 serialized pieces.
Blade: 58HRC N690Co Testudo Stainless Steel
Country of production: Italy
Handles: Black satin anticorodal
Blade Lenght: 90mm.
Blade Thinckness: 4mm.
Total Lenght: 205mm.
Hole Diameter: 22mm
Weight: 152g.
Sheath: Kydex with Tek-Lok
Notes: Worldwide limited edition, only 50pcs each serializedskar-testudo -
ExtremaRatio - SKAR - Karambit Limited Edition - knife
This knife is a Collini Cutlery exclusive edition, the one and only Karambit blade ever made by Extrema Ratio and you will not be able to find it in other stores - This is a very small worldwide limited edition of 50 serialized pieces.
Blade: 58HRC N690Co Stonewashed Stainless Steel
Country of production: Italy
Handles: Black satin anticorodal
Blade Lenght: 90mm.
Blade Thinckness: 4mm.
Total Lenght: 205mm.
Hole Diameter: 22mm
Weight: 152g.
Sheath: Kydex with Tek-Lok
Notes: Worldwide limited edition, only 50pcs each serializedskar -
Fox - Mushroom Knife - Cocobolo - FX-408
Intended Use: Mushroom Knife
Blade: Stainless steel 440
Handle material: Cocobolo
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 175mm.
Balance: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes: Nylon brush408 -
Maserin - mushroom knife - Olive - 804/OL
Purpose b>: Knife Mushrooms Lama b>: Stainless steel 440 Handle b>: olive wood Blade length b>: 75mm. Blade Thickness b>: 2mm. Length closed b>: 125mm. Total length b>: 205mm. Balancing b>: - Weight b>: 100g. Closing b>: Back Lock Clip b>: - Sheath b>: - Notes: b>: Brush synthetic disappearance2306SF -
Consigli Scarperia - Ronchetta Horn R-RVC17 - knife
Ronchetta Horn R-RVC17 - knife
Quaint old-fashioned knife, used in Valtellina especially for agricultural work in viticulture. Lightweight and easy to handle, has achieved perfect functionality, pocket comfortably.
Lama with particular sickle shape
Lama. 440 stainless steel,
Handle: made from a full horn tip
Total length 150 mm
Blade length: 65 mm
Sharp Hand2439 -
Maserin - Voyager - 281 - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox 440 56HRC
Produzione Lama: Italia
Manicatura: Alluminio
Lunghezza lama: 85mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 250mm.
Bilanciatura: -
Peso: 175g.
Chiusura: Liner Lock
Clip: amovibile in acciaio inox
Fodero: -
Note: skull crasher e tagliasagole di emergenza2930