Fixed Blade Knives: sturdiness and versatility for every adventure
-
ExtremaRatio - KIRI Neck Knife - N690Co Dark Stone Washed - Kiridashi Knife
The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency.
Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.
Intended use: Neck knife / UtilityType of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)ER-KIRI-DSW -
ExtremaRatio - KIRI Neck Knife - N690Co Satin - Kiridashi Knife
The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency.
Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.
Intended use: Neck knife / UtilityType of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)ER-KIRI-SA -
Maserin - Mini Trapper - Elmax & Deer Horn - 924/CV-1 - knife
Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.
Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.
Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.
Intended Use: Hunting / Hiking
Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -MA-924/CV-1 -
Benchmade - Flyway - Small Game Hunter Knife - CPM-S90V & OD Green G10 - 15700-01 - knife
The Flyway has proven to be the ultimate fixed blade for offshore game and waterfowl. The 15700-01 offers the ultimate in edge retention thanks to CPM-S90V steel, which will keep you in the field well into the season. To change things up even further, the ergonomic handle now includes OD green G10 gauntlets with orange rings for visibility, while the orange Boltaron sheath is perfect for attaching to a chest rig or stuffing into a backpack.
Intended Use: Hunting/Light Utility
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15700-01 -
Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife
The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano RonFX-826 -
Fox - AKA Spear Point by D. Simonutti - Elmax Top Shield - FX-554B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 60g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-554B -
Fox - AKA Drop Point by D. Simonutti - Elmax Top Shield - FX-553B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 65g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-553B -
Viper - Lille 1 Fixed Knife by Vox - Elmax Carbon Fiber - VT4022FC - knife
Intended Use: Sporting / Hunting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4022FC -
Benchmade - Flyway - Small Game Hunter - 15700 - knife
Game and waterfowl require a fixed scalpel-like blade and the all-new 15700 Flyway™️ is the right tool for the job. With the right length of blade in CPM-154, featuring SelectEdge with 14-degree penetrating sharpening, this knife is perfect for working your game. The solid, stable orange G10 handle boasts perfect ergonomics, while the two-tone Boltaron sheath makes it easy to slip into your backpack for river or creek trips. With surgical precision and efficient design, the 15700 Flyway™️ is the small game hunter's new best friend.
Intended Use: Hunting/Light Utility
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM (58/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: kydex
Packaging: cardboard box with Benchmade logos
Notes: -BM-15700 -
ExtremaRatio - Satre - N690 Black - Neck Knife - Knife
Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.
It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).
In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.
The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle
This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.
Intended use: Neck / Hiking / Utility Knife
Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)ER-SAT-BL -
ExtremaRatio - Satre - S600 Black EXP Dark - Neck Knife
Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.
It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.
In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.
The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.
The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.
The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.
Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.
Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.
The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.
Intended Use: Neck Knife / Hiking / Utility
Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).ER-SAT-S6 -
ExtremaRatio - Satre - N690 Stone Washed - Neck Knife
Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.
It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.
In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.
The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.
The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.
Intended Use: Neck Knife / Hiking / UtilityType of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).ER-SAT-SW -
Spartan Blades - Enyo Black AUS-8A - Field Grade - SBBL2BK - Knife
Intended Use: Neck / Tactical / Military
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.SBBL2BK -
Ka-Bar - USSF TDI Astro MP - 1480SF - knife
Intended Use: Tactical / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSFKB-1480SF -
Ka-Bar - TDI Investigator Law Enforcement - 1493 - knife
Intended use: tactical / military
Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 modelKB-1493 -
Viper - Berus 2 by T. Rumici - Green Canvas Micarta - VT4014CG - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta canvas
Blade length: 62mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4014CG -
Viper - Berus 2 by T. Rumici - Marbled Carbon Fiber - VT4014FCR - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4014FCR -
Fox - Fixed Blade Karambit - G10 Black - FX-598 - Knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co stainless steel
Blade treatment: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 95g.
Sheath: kydex, with belt clips made of synthetic material
Packaging: cardboard box with Fox FKMD logos
Notes: Fixed blade version of the FX-599 folding Mini Karambit modelFX-598 -
GiantMouse - GMF1-F by Vox & Anso - M390 PVD Stonewashed - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Absolutely like new, untouched, never used, never put in the sheath - Supplied with box and warranty - Checked and certified by our in-house laboratory.
Intended Use: Sporting / HuntingType of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang stainless steel M390 59/61 HRC
Blade treatment: PVD Stonewashed
Handle: stainless steel M390
Blade length: 60mm.
Total length: 135mm.
Blade thickness: 5mm.
Weight: 70g.
Sheath: leather sheath
Packaging: Cardboard box with GiantMouse ACE logos
Notes: Design by Jens Anso & Jesper Voxnaes - Knife withdrawn from private collection, absolutely like newGM-GMF1-FAP -
ExtremaRatio - Satre Expeditions - Utility Neck Knife - Knife
Satre Expeditions, as well as the Satre model from which it derives, is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses or as part of an EDC (Every Day Carry) kit.
It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor. In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards.
The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.
The full-tang skeletonized structure, allows you to customize the knife using Paracord as a coating for the handle.
Satre Expeditions uses Böhler N690 steel heat treated to 58 HRC with MIL-C-13924 burnishing and stone washed surface treatment (Dark Stone finish). It comes with a desert-colored pre-formed kydex sheath on which you can attach the Firesteel for lighting fires (provided inside the box).
Intended use: Neck knife / Hiking / Utility
Production type: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58
Blade finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Stainless steel N690Co 58
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes:Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).ER-SAT-EX -
CRKT - Bear Claw Rescue Fixed Blade Knife 2510 - emergency knife
Intended use: tactical / emergency belt cutter
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel AUS4
Blade treatment: -
Handle: Glass Reinforced Nylon
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: -
Total length: 146mm.
Weight: 96g.
Closing: -
Sheath: Glass-Reinforced Nylon
Packaging: Cardboard box with CRKT logos
Note: -C2510 -
Wander Tactical - Tryceratops Neck - Raw Finish and Cherry Brown Micarta - custom knife
"Neck Knife" version with slimmer sheath and tapered grips, to make the knife more comfortable and suited to the neck
Intended Use: Tactical / Collection
Type of production: Custom
Country of Production: Italy
Blade: D2 Tool Steel 59/60HRC
Blade Treatment: RAW
Handle: Micarta Fire
Blade length: 65 mm.
Blade thickness: 5.5 mm.
Overall length: 132 mm.
Balancing: backward
Weight: 176 g.
Sheath: Custom maded OD Black Kydex
Packaging: -
Note: each knife is unique because it is hand maded, could therefore be small differences / inaccuracies respect to the model on pictures.WT-TRT-NE -
Wander Tactical - Tryceratops Raw Finish and Darkwood Micarta - custom knife
The Tryceratops, small, compact and very robust, born from the idea of being able to have with him a knife reliable in different situations even with minimum dimensions. Very sharp, comfortable and easy to handle, the knife Tryceratops is a great demand from American hunters and field operators.
Intended Use: Tactical / Collection
Type of production: Custom
Country of Production: Italy
Blade: D2 Tool Steel 59/60HRC
Blade Treatment: OD Green
Handle: Micarta Fire
Blade length: 65 mm.
Blade thickness: 5.5 mm.
Overall length: 132 mm.
Balancing: backward
Weight: 176 g.
Sheath: Custom maded OD Black Kydex with black leather loop
Packaging: -
Note: each knife is unique because it is hand maded, could therefore be small differences / inaccuracies respect to the model on pictures.12273 -
Takeshi Saji - Kurosameshotou traditional knife - handmade knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, 64HRC Hitachi Shirogami carbon steel
Blade treatment: -
Handle: traditional Japanese, ray skin and rattan
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 184mm.
Thick when closed: -
Balancing: -
Weight: 100g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiTS-10698 -
Takeshi Saji - Kiridashi Seiryu - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Il kiridashi è uno strumento a metà tra un coltello e un taglierino dai molteplici utilizzi. La particolarità del Kiridashi è data dalla bisellatura asimmetrica: uno solo dei due lati è affilato mentre l'altro resta piatto.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: intreccio in rattan
Lunghezza lama: 65mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: -
Clip: -
Fodero: scatola di legno
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4033