Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
Aitor - Jungle King I knife Black - green sheath - 16016V - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos16016V -
Indiana - Miniature knife - Bowie Sitting Bull Black - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TSB€23.77Only 1 left -
Indiana - Miniature knife - Bowie Bison - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-BI€23.77Only 2 left -
Indiana - Miniature knife - Bowie Survival - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-S€23.77Only 2 left -
Indiana - Miniature knife - Sitting Bull Bowie - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TS€23.77Only 4 left -
No brand - Scout knife vintage - knives
Type of production: Industrial
Production Lama: Italy
Blade: 440A steel
Blade treatment: polished blade
Handle: plastic material
Blade length: 120mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 84g.
Sheath: in leather
Note: -NB-SCOUT€15.57Only 4 left -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - Knife
ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.L446228 -
Aitor - Jungle King II Black knife Camo - 16071 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16071 -
Down Under Knives - The Arkansas Toothpick Bowie - DUK-TP - knife
Intended use: Sport / Collection
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with selective tempering
Blade treatment: -
Handle: Leather rings
Blade length: 285mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 415mm.
Thickness when closed: -
Balance: -
Weight: 630g.
Lock: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with Down Under Knives logos
Notes: -L446029 -
Aitor - Commando Black knife - 16021 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16021 -
Aitor - Commando Satin knife - 16020 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16020 -
Aitor - Jungle King I knife Black - 16016N - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16016N -
Aitor - Jungle King II Black knife - 16013N - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013 -
Aitor - Jungle King II knife satin - 16012 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16012 -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
Down Under Knives - Kookaburra Throwing Knives DUK-KB - Throwing Knives
Set of two throwing knives with sheath
Intended use: Throwing / Outdoor
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel - 52HRC
Handle: Leather
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 305mm.
Weight: 358g.
Sheath: Leather, crocodile-like
Packaging: Cardboard box with Down Under logosL446017 -
Down Under Knives - Red Rock Raptor Kukri Machete - L446026 - knife
Intended use: Kukri/Heavy Utility
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with differential tempering 59/46HRC
Blade Treatment: Mirror polishing
Handle: Brass and leather rings
Blade length: 260mm.
Blade thickness: 5.5mm.
Total length: 395mm.
Weight: 690g.
Sheath: Leather, reptile-likePackaging: Cardboard box with Down Under logos and warranty certificates
L446026 -
Down Under Knives - The Outback Bowie - knife - L446028
Intended use: Hunting / Outdoor
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened differentiated 58/45HRC
Treatment Blade: Mirror polishing
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Sheath: In leather, crocodile-like
Packaging: cardboard box with logos Down Under, sharpener for sharpening
Notes: The outback is a clear homage to the knife used by Paul Hogan in Crocodile Dundee movie, in fact faithfully reproduces the shape, size and material as the one used for filming.L446128 -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Sanelli Ambrogio - BBQ - Toothed carving knife 20cm - Kitchen knife
Sanelli Ambrogio's toothed carving knife for shredding, chopping, slicing and dicing meat before barbecuing. Belongs to a professional line of cutlery designed for cutting and processing meat.
The blade of the serrated knife is manufactured from nitro nitrogen B steel, and the polished finish allows for better meat processing.
The handle has an excellent grip between blade and handle, the latter non-slip polypropylene provides perfect ergonomics and a firm grip during cutting.
Intended Use: Barbecue
Production type: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 200mm.
Total length: 325mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safeBC03.020 -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Intended Use: Hunting / OutdoorProduction Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collectionL446228-CP -
Chris Reeve - Inyoni Drop Point - MagnaCut & Natural Canvas Micarta - knife
In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird." Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.
Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.
Intended use: sports/hunting
Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warrantiesCR-INY-1001 -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Treeman Knives - Recon Hunter Knife - Green G-10 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratoryIntended Use: Tactical/Collection
Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -AP-TREE-RECON€0.00Only -20 leftOut of stock -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
Aitor - Ferfal Outdoor knife - N680 steel - 16099 - knife
Intended use: Collection / Outdoor
Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers
Packaging: cardboard with Aitor logosAI-16099 -
Chris Reeve - Inyoni knife - Cocobolo - PRIVATE COLLECTION - collection knife
Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.
Intended use: sports / huntingBlade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means birdAP-INY-CR -
Aitor - Jungle King I knife Satin - 16015 - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16015 -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Indiana - Set 3 pieces miniature knives - Survival Tanto series - collection knife
Faithful miniature reproduction of survival knives produced in Italy around the 90s
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Sheath: vinyl cordura sheath
Big Knife
Blade length: 75mm.
Blade thickness: 2mm.
Total length: 130mm.
Weight: 36g.Medium Knife
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 90mm.
Weight: 15g.Small Knife
Blade length: 30mm.
Blade thickness: 2mm.
Total length: 50mm.
Weight: 3g.IN-SET1€0.00Only -20 leftOut of stock -
Chris Reeve - Green Beret 5.5 "knife - Dark Earth by W. Harsey - knife
Intended use: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: CPM-S35VN stainless steel at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balancing: on the lower guard branch
Weight: 335g.
Sheath: Nylon thigh, M.O.L.L.E.compatible
Notes: New 2018 version - Guarantee and authenticity certificates - Design by William W. HarseyGBS-1002 -
Wildrock Gear - Strikeback Tomahawk Desert Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-DC€401.64Only 0 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-C€401.64Only 0 leftOut of stock -
Hydra Armaments - Hecate knife tactical stonewashed - craft knife
Type of production: Artisan
Lama production: Italy
Blade: integral, D2 (59-61 HRC) with cryogenic treatment
Blade treatment: satin
Handle: G10 with 3D texture
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 280mm.
Balancing: set back
Weight: 425g.
Sheath: Kydex with belt attachment and MOLLE clip attachment
Package: -
Notes: limited series of 40 pieces.HA-HED2SW€0.00Only -99 leftOut of stock -
Chris Reeve - Green Beret 7" knife by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1000 -
Chris Reeve - Green Beret 7" knife Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1002 -
Erapuu Antler - Lappland Carver Finland knife 62 - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: on the guard branch
Weight: 84g.
Sheath: Brown leather
Note:14550€0.00Only -20 leftOut of stock -
Erapuu Antler - Pocket Finland knife - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone
Blade length: 55mm.
Blade thickness: 2mm.
Total length: 125mm.
Balancing: on the guard branch
Weight: 62g.
Sheath: in bone
Note:14553€53.28Out of stock -
Erapuu Antler - Lappland Carver Finland knife 95 - knife
Finnish artisan knives.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 93mm.
Blade thickness: 3mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 114g.
Sheath: Brown leather
Note:14551€0.00Only -20 leftOut of stock -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Chris Reeve - Pacific Dark Eart by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1005 -
Chris Reeve - Pacific Plain by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1000 -
Chris Reeve - Pacific by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1001 -
Chris Reeve - Green Beret 5.5" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balance: on the lower guard branch
Weight: 335g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB5-1003 -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Chris Reeve - Green Beret 7" by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1001 -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Chris Reeve - Nyala Insingo - knife
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -12424 -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Down Under Knives - Walkabout Bowie - knife - L446021
Down Under Knives - Walkabout Bowie - knife - L446021
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel 440C Differentiated hardening 58 / 45HRC
Lama treatment: Mirror polishing
Handle: brass, ebony wood and leather rings
Blade length: 195mm.
Blade thickness: 6mm.
Overall length: 325mm.
Weight: 566g.
Sheath: Leather
Packaging: cardboard box with logos Down Under, sharpening steel for sharpening
Notes:L446021 -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Down Under Knives - The Mistress Bowie - knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -L446033 -
Down Under Knives - The Bushmate - knife
Intended Use: Light Utility
Type of production: Industrial
Blade: 440C stainless steel hardened differentiated 59/46HRC
Treatment Blade: Mirror polishing
Handle: Brass rings and leather
Blade length: 100mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Weight: 360g.
Sheath: In leather, with bone inserts
Packaging: cardboard box with logos Down Under and warranty certificatesL446010 -
Down Under Knives - The Razorback knife - L446018 - DUK-RB - knife
Intended use: Heavy Utility
Type of production: Industrial
Blade: 440C stainless steel with differential hardening 59/46HRC
Blade Treatment: Mirror polish
Handle: Brass and leather rings
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Weight: 465g.
Sheath: Leather, with bone inserts
Packaging: Cardboard box with Down Under logos and warranty certificatesL446018 -
Aitor - Crow Black Tactical Knife - 16129 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 115mm.
Spessore della lama: 5mm.
Lunghezza totale: 235mm.
Bilanciatura: 2 cm arretrata dal ramo di guardia
Peso: 280g.
Fodero: in cuoio con attacco orizzontale e verticale4051B -
Aitor - Crow Tactical Knife - 16128 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 115mm.
Spessore della lama: 5mm.
Lunghezza totale: 235mm.
Bilanciatura: 2 cm arretrata dal ramo di guardia
Peso: 280g.
Fodero: in cuoio con attacco orizzontale e verticale4051 -
Aitor - One Black Tactical Knife - 16131 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252B -
Aitor - One Tactical Knife - 16130 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiata
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252S -
Aitor - Zero Black Tactical Knife - 16127 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: black
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 125mm.
Spessore della lama: 5mm.
Lunghezza totale: 245mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 316g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido
Note: affilatore alloggiato nel manico4450B -
Aitor - Zero Tactical Knife - 16126 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiata
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 125mm.
Spessore della lama: 5mm.
Lunghezza totale: 245mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 316g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido
Note: affilatore alloggiato nel manico4450 -
Chris Reeve - Green Beret 5.5 "- knife
Chris Reeve - Green Beret 5.5 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S30V 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 275mm.
Balance: on the branch of lower guard
Weight: 320g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0013 -
Chris Reeve - Inyoni coltello
Novità 2007 direttamente dallo Shot Show di Orlando, Florida
Destinazione d'uso: sportivo/caccia
Lama: in acciaio inox CPM-S30V 58/59HRC
Trattamento Lama: stonewash finish
Manicatura: Legno di cocobolo
Lunghezza lama: 88mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 201mm.
Bilanciatura: arretrata
Peso: 76g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: inyoni in zulu significa uccello0022 -
Chris Reeve - Neil Roberts 6 "knife - knife
The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve
Intended use: Fighter / Tactical
Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranksCR0014 -
Chris Reeve - Nyala - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -0035 -
Chris Reeve - Pacific by W. Harsey - black canvas micarta - knife
Winner of "American year knife" to Blade Show 2007.
The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.
Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity0026 -
Chris Reeve - Professional Soldier - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Sportivo / Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 55/57HRC
Trattamento Lama: KG Gun-Kote
Manicatura: In acciaio inox CPM-S35VN 55/57HRC
Lunghezza lama: 86mm.
Spessore lama: 4.1mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: -
Clip: -
Fodero: in Kydex by Blade Tech
Confezione: scatola in cartone bianco con loghi Chris Reeve, Certificati di garanzia
Note: Design by Bill Harsey0030 -
Tomahawk - traditional Indian ax - collection tool
Faithful reproduction of an Indian tomahowk
Intended use: Sports / Collection
Type of production: Industrial
Country of production: China
Blade: 420 stainless steel
Blade treatment: -
Handle: in wood with leather finishes
Blade length: 80mm.
Blade thickness: 40mm.
Total length: 440mm.
Weight: 355g.
Sheath: -
Notes: Excellent for display use, not suitable for real and heavy usTOMA-IND€36.89Only 0 leftOut of stock -
Chris Reeve - Green Beret 7 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0012