Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Gerber - Tri-Tip Mini Cleaver Knife - Stonewash - Black - G1693 - knife
Intended use: Sports
Type of production: industrial
Blade: full tang, in 7Cr17MoV stainless steel
Blade finish: stonewash
Country of production: China
Handle: aluminum
Blade length: 73mm.
Blade thickness: 4.5mm.
Total length: 148mm.
Balancing: backward
Weight: 170g.
Sheath: ABS with multi-position belt attachment
Note: -G1693 -
Gerber - Tri-Tip Mini Cleaver - Black Coating - G1694 - knife
Intended use: Sports
Type of production: industrial
Blade: full tang, in 7Cr17MoV stainless steel
Blade finish: Teflon coating
Country of production: China
Handle: aluminum
Blade length: 73mm.
Blade thickness: 4.5mm.
Total length: 148mm.
Balancing: backward
Weight: 170g.
Sheath: ABS with multi-position belt attachment
Note: -G1694 -
Gerber - StrongArm Fixed Black Plain - knife
Intended Use: Tactical / Hiking
Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with holeG31-003654 -
Gerber - StrongArm Fixed Black - knife
Intended Use: Tactical / Hiking
Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with holeG31-003648 -
Gerber - Brown LMF II Infantry - 1400 - knife
Gerber - Brown LMF II Infantry - 1400 - knife
The knife is in fact designed not only to be extremely nimble and fleet changes of grip , but also rugged enough to pierce the fuselage of a plane but also simply be used as a hammer, frangivetri or throwing knife .
Intended Use : Sport / Tactical / Military
Intended Use: Military
Type of production : industrial
Blade: Stainless steel 12C27
Treatment Blade: TiNi - Titanium Nitride
Production Lama USA
Handle material: non-slip fiberglass and nylon
Blade length : 125mm .
Blade Thickness: 4mm .
Length closed: -
Total length : 275mm .
Balance: backward 3cm .
Weight: 330g .
Closing: -
Clip: -
Sheath: Nylon and fire retardant polymers slip , multi- attacks SPRINGS system , ultra-thin to limit the overall dimensions , integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and holes for wrist strap or to be used with a pole to create a spear5725 -
Gerber - LMF II Infantry Black - 1629 - knife
Gerber - LMF II Infantry Black - 1629 - knife
After two years of collaboration with the expert military instructor Frank Heyl the Gerber is happy to bring to market what they define as the most resistant of the military knives / survival as never costruiti.Il knife is in fact designed not only to be extremely agile and rapid changes in grip , but also rugged enough to pierce the fuselage of a plane but also simply be used as a hammer, frangivetri or throwing knife .
Intended Use: Military
Type of production : industrial
Blade: Stainless steel 12C27
Treatment Blade: TiNi - Titanium Nitride
Production Lama USA
Handle material: non-slip fiberglass and nylon
Blade length : 125mm .
Blade Thickness: 4mm .
Length closed: -
Total length : 275mm .
Balance: backward 3cm .
Weight: 330g .
Closing: -
Clip: -
Sheath: Nylon and fire retardant polymers slip , multi- attacks SPRINGS system , ultra-thin to limit the overall dimensions , integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and holes for wrist strap or to be used with a pole to create a spear.5738 -
Gerber - LMF II Infantry Verde - 1626 - Cuchillo
Gerber - LMF II Infantry Verde - 1626 - Cuchillo
Después de dos años de colaboración con el instructor militar experto Frank Heyl el Gerber se complace en llevar al mercado lo que definen como el más resistente de los cuchillos militares / de supervivencia como nunca cuchillo costruiti.Il es , de hecho, diseñado no sólo para ser extremadamente ágil y cambios rápidos en agarre , pero también lo suficientemente resistente como para perforar el fuselaje de un avión, pero también simplemente ser utilizados como un martillo , frangivetri o cuchillo de lanzamiento .
Uso previsto : Military
Tipo de producción : industrial
Hoja: Acero inoxidable 12C27
Tratamiento de la hoja: TiNi - nitruro de titanio
Producción Lama EE.UU.
Material del mango : fibra de vidrio antideslizante y nylon
Longitud de la hoja : 125mm .
Espesor de la hoja : 4 mm .
Longitud cerrado : -
Longitud total: 275mm .
Balance: hacia atrás 3cm .
Peso: 330 g .
Cierre: -
Clip -
Funda: Nylon y resistente al fuego polímeros desliz , múltiples ataques SPRINGS sistema , ultra -delgado para limitar las dimensiones generales , integrado afilador
Notas : Skullcrasher / Martillo en acero inoxidable y los orificios para la correa de muñeca o para ser utilizado con un poste para crear una lanza .5738G -
Chris Reeve - Inyoni Drop Point - MagnaCut & Natural Canvas Micarta - knife
In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird." Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.
Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.
Intended use: sports/hunting
Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warrantiesCR-INY-1001 -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Bark River - Bravo 1 Field Knife - Mil-Spec - Camo G-10 - COLLEZIONE PRIVATA - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: non più in produzione
* Affilatura: Di fabbrica
* Segni su lama: Leggeri
* Segni su impugnatura: No
* Scatola: Non presente
* Fodero: In Cuoio
* Manuali, Certificati e Garanzie: NO
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Tattico/Collezione
Tipo di produzione: Semi-Industriale
Paese di produzione: USA
Lama: in acciaio inox CPM-S35VN
Trattamento lama: satinatura
Manicatura: G-10 Camo
Lunghezza lama: 110mm.
Spessore lama: 5.5mm.
Lunghezza totale: 244mm.
Bilanciatura: arretrata di circa 2 cm dal bordo della guancetta
Peso: 240g. (350g. fodero compreso)
Fodero: In cuoio
Confezione: privo di scatola e certificati
Note: -AP-BRAVO1 -
Chris Reeve - Inyoni knife - Cocobolo - PRIVATE COLLECTION - collection knife
Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.
Intended use: sports / huntingBlade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means birdAP-INY-CR -
Gerber - LMF II Infantry knife Black - PRIVATE COLLECTION - 1629 - knife
Knife withdrawn from a private collection - In like new condition, original sharpening, without original box - Checked and certified by our in-house Coltelleria Collini laboratory.
After two years of collaboration with expert military instructor Frank Heyl, Gerber is delighted to bring to market what they themselves define as the strongest military / survival knife ever built. quick to change the handle, but also so robust that it can pierce an aircraft fuselage but also simply be used as a hammer, glass breaker or throwing knife.
Intended use: Military
Type of production: industrial
Blade: 12C27 stainless steel
Blade treatment: TiNi - Titanium Nitriding
Production Lama: USA
Handle: non-slip in fiberglass and nylon
Blade length: 125mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 275mm.
Balancing: 3cm back.
Weight: 330g.
Closure: -
Clip: -
Sheath: Nylon and fire retardant anti-slip polymers, M.O.L.L.E. system, ultra-flat to limit the overall dimensions, integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and slots for wrist strap or to be used with a rod to create a spear.AP-1629-GER -
Gerber - StrongArm Fixed Coyote Plain - G1058 - knife
Intended use: Tactical / Hiking
Type of production: industrial
Blade: full tang, 420HC stainless steel
Blade Treatment: Ceramic Coating
Blade production: USA
Handle: fiberglass and nylon with non-slip rubberized polymers
Blade length: 122mm.
Blade thickness: 5mm.
Total lenght: 248mm.
Balance: set back 1cm.
Weight: 204g.
Scabbard: Nylon and polymer, multi-position and MOLLE compatible.
Notes: Rear skullcrasher that integrates the hole for the wrist strap.G31-003615 -
BlackJack - Model 5 knife - A2 - Green Canvas Micarta - outdoor knife
Intended use: hunting / sports / collection
Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark RiverBCB5GM -
Chris Reeve - Green Beret 5.5 "knife - Dark Earth by W. Harsey - knife
Intended use: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: CPM-S35VN stainless steel at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balancing: on the lower guard branch
Weight: 335g.
Sheath: Nylon thigh, M.O.L.L.E.compatible
Notes: New 2018 version - Guarantee and authenticity certificates - Design by William W. HarseyGBS-1002 -
Bark River - Sandstorm - CPM154 Steel - Green Canvas - BA07150MGC - knife
Intended use: Hunting / Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Total length: 244mm.
Balancing: advanced
Weight: 168g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07150MGC -
Bark River - Bravo 1 Field knife - A2 Steel - Green Canvas - BA07112MGC - knife
Intended use: Outdoor
Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 10mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced
Weight: 192g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07112 -
Bark River - Bravo 1.5 Field knife - CPM 3V - Black Canvas - BA07124LT - knife
Intended use: Outdoor
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 4mm.
Total length: 270mm.
Balancing: advanced
Weight: 194g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07124LT -
Bark River - Bravo Survivor knife A2 - Green Canvas - BA07116MGC - knife
Intended use: Outdoor / Tactical
Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 315mm.
Balancing: advanced
Weight: 480g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -
Send feedback
History
Saved07116MGC -
Gerber - 05981 Fixed Blade Tactical Knife - knife
Intended use: Survival / Utility / Hiking
Type of production: Industrial
Lama production: Taiwan
Blade: full tang, in 9Cr19MoV stainless steel
Blade treatment: satin finish
Handle: rubber
Blade length: 135mm.
Blade thickness: 4.2mm.
Length closed: -
Total length: 265mm.
Thick when closed: -
Balancing: -
Weight: 206g.
Closing: -
Clip: -
Sheath: in Nylon
Packaging:
Note:05981 -
Bark River - Bravo Tope Record - Black Canvas - 10-221M-BC - knife
Intended use: Outdoor / Tactical
Type of production: semi-industrial
Country of production: USA
Blade: full tang in CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 327mm.
Balancing: advanced
Weight: 380g.
Sheath: in leather
Packaging: Cardboard box with Bark River logos
Note: -BR-BTRB -
Chris Reeve - Green Beret 7" knife by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1000 -
Chris Reeve - Green Beret 7" knife Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Chris Reeve - Pacific Dark Eart by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1005 -
Chris Reeve - Pacific Plain by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1000 -
Chris Reeve - Pacific by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1001 -
Chris Reeve - Green Beret 5.5" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balance: on the lower guard branch
Weight: 335g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB5-1003 -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Chris Reeve - Green Beret 7" by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1001 -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Chris Reeve - Nyala Insingo - knife
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -12424 -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Gerber - StrongArm Fixed Coyote - knife
Intended Use: Tactical / Hiking
Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole12284 -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Gerber - Bear Grylls Ultimate Pro Fixed Blade - 31-001901 - knife
Blade: 9Cr19MoV Stainless Steel Handle: TPE Blade Lenght: 122mm. Blade Thickness: 5mm. Overall Lenght: 254mm. Weight: 388.4g. Lock: - Clip: - Sheath: - Notes: Pull-through carbide sharpener in sheath, for guaranteed sharpness - Built-in fire starter rod in watertight holder10070 -
Bark River - North Star A2 - Green Canvas Micarta - 06-137M-GC
Purpose : Hunting / Outdoor / Bushcraft
Type of production : Semi-Industrial
Country of production : USA Blade : A2 steel at 58HRC
blade Treatment : -
Handle : Green Canvas Micarta
blade length : 103mm.
blade thickness : 4mm.
Length closed : -
total length : 212mm.
thickness when closed : -
Balancing : -
Weight : 126g.
Closing : -
Clip : -
Sheath : brown leather, style Loveless
Pack : Cardboard box with logos Bark River
Notes : -10044 -
Gerber - Bear Grylls Survival Hatchet - 31-002070 - Accetta
Destinazione d'uso: Sportivo/Escursionismo
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr13
Trattamento Lama: Verniciatura
Manicatura: Polimeri gommati
Lunghezza lama: 89mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 242mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 590g.
Chiusura: -
Clip: -
Fodero: in Nylon, da cintura, con chiusura a velcro
Confezione: Scatola di cartone con loghi Gerber e Bear Grylls
Note: Piccolo manuale di sopravvivenza incluso10015 -
Gerber - Bear Grylls Ultra Compact Fixed Blade - 31-001516
Destinazione d'uso: Sportivo/Escursionismo Tipo di produzione: Industriale Produzione Lama: China Lama: in acciaio inox 7Cr17MoV Trattamento Lama: Verniciatura Manicatura: Polimeri gommati Lunghezza lama: 83mm. Spessore lama: 3mm. Lunghezza chiuso: - Lunghezza totale: 159mm. Spessore da chiuso: - Bilanciatura: - Peso: 127g. Chiusura: - Clip: - Fodero: in ABS, multiposizione; da cintura, da collo, da stivale, con clip amovibile Confezione: Scatola di cartone con loghi Gerber e Bear Grylls Note: Piccolo manuale di sopravvivenza incluso10014 -
Gerber - Bear Grylls Compact Parang Machete - 22-31-002072
Destinazione d'uso: Escursionismo Leggero
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio al carbonio 1055
Trattamento Lama: Verniciatura
Manicatura: Polimeri gommati
Lunghezza lama: 236mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 380mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 385g.
Chiusura: -
Clip: -
Fodero: Cordura
Confezione: Scatola di cartone con loghi Gerber e Bear Grylls
Note: Piccolo manuale di sopravvivenza incluso10013 -
Bark River - Huntsman A2 Green Canvas Micarta - Coltello
Destinazione d'uso: Caccia/Outdoor/Bushcraft
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio A2 a 58HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 82mm.
Spessore lama: 4.8mm.
Lunghezza chiuso: -
Lunghezza totale: 178mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: -
Clip: -
Fodero: In pelle marrone, stile Loveless
Confezione: Scatola di cartone con loghi Bark River
Note: -3296 -
Bark River - Northstar Companion A2 Green Canvas Micarta - Coltello
Destinazione d'uso: Caccia/Outdoor/Bushcraft
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio A2 a 58HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 82mm.
Spessore lama: 3.8mm.
Lunghezza chiuso: -
Lunghezza totale: 180mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 114g.
Chiusura: -
Clip: -
Fodero: In pelle marrone, stile Loveless
Confezione: Scatola di cartone con loghi Bark River
Note: -3295 -
Chris Reeve - Green Beret 5.5 "- knife
Chris Reeve - Green Beret 5.5 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S30V 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 275mm.
Balance: on the branch of lower guard
Weight: 320g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0013 -
Chris Reeve - Inyoni coltello
Novità 2007 direttamente dallo Shot Show di Orlando, Florida
Destinazione d'uso: sportivo/caccia
Lama: in acciaio inox CPM-S30V 58/59HRC
Trattamento Lama: stonewash finish
Manicatura: Legno di cocobolo
Lunghezza lama: 88mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 201mm.
Bilanciatura: arretrata
Peso: 76g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: inyoni in zulu significa uccello0022 -
Chris Reeve - Neil Roberts 6 "knife - knife
The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve
Intended use: Fighter / Tactical
Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranksCR0014 -
Chris Reeve - Nyala - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -0035 -
Chris Reeve - Pacific by W. Harsey - black canvas micarta - knife
Winner of "American year knife" to Blade Show 2007.
The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.
Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity0026 -
Chris Reeve - Professional Soldier - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Sportivo / Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 55/57HRC
Trattamento Lama: KG Gun-Kote
Manicatura: In acciaio inox CPM-S35VN 55/57HRC
Lunghezza lama: 86mm.
Spessore lama: 4.1mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: -
Clip: -
Fodero: in Kydex by Blade Tech
Confezione: scatola in cartone bianco con loghi Chris Reeve, Certificati di garanzia
Note: Design by Bill Harsey0030 -
Gerber - Big Rock Camp Knife - 22-01589 - Coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: China
Lama: full tang, in acciaio inox 440A
Trattamento Lama: -
Manicatura: Nylon e fibra di vetro, gommata
Lunghezza lama: 113mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 242mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 178g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Scatola di cartone con loghi Gerber
Note: -4408 -
Gerber - G01063 - Bear Grylls Ultimate Fine Edge Fixed Blade - coltello
L'ultimate knife è il fiore all'occhiello della serie survival sviluppata in collaborazione con Bear Grylls.
Disegnato dietro strette indicazioni di Bear, è carico di innovazioni che non è possibile trovare su altri modelli a lama fissa.
Destinazione d'uso: Utility
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 7Cr17MoV a filo liscio
Trattamento Lama: Nitrurazione
Manicatura: Gomma antiscivolo e Nylon
Lunghezza lama: 120mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 255mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: Cordura con guscio rigido in Nylon
Confezione: Scatola con loghi Gerber/Bear Grylls
Note: acciarino incluso - affilatore al diamante
Caratteristiche del coltello:
- Lama drop point in acciaio inox liscia
- Impugnatura ergonomica in gomma texturizzata per massimizzare il comfort e massimizzare il grip della presa
- Pomolo in acciaio inox, ideale per essere utilizzato come martello
- Battente per acciarino integrato nel dorso della lama
- Fischietto di emergenza integrato con il lacciolo di sicurezza
Caratteristiche del fodero:
- Fodero in Nylon
- Acciarino al ferro-cerio integrato
- Affilatore al diamante integrato
- Piccolo manuale di emergenza con consigli di sopravvivenza di Bear Grylls
Il consiglio di Bear Grylls:
“Il compagno delle mie avventure più estreme, senza di lui non mi sentirei al sicuro. Un'impugnatura super grippante è essenziale nella natura ed un fodero così ricco ben concepito aiuta a tenere tutto a portata di mano in caso di emergenza."4613L -
Gerber - G01066 - Bear Grylls Compact Fixed Blade - knife
Un nuovo fisso della serie Gerber Bear Grylls. Il Compact Fixed Blade si propone come un coltello compatto e leggero, ideale da inserire nella propria dotazione outdoor.
Anche in questo caso è stato disegnato seguendo le indicazioni di Bear ed è dotato di una corta e robusta lama, di un'ergonomica manicatura in gomma e di un resistente fodero in plastica.
Destinazione d'uso: Utility
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 7Cr17MoV
Trattamento Lama: Nitrurazione
Manicatura: Gomma antiscivolo e Nylon
Lunghezza lama: 86mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 196mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 106g. (144g. compreso il fodero)
Chiusura: -
Clip: -
Fodero: ABS, con clip rimovibile
Confezione: blister con loghi Gerber/Bear Grylls
Note: inclusa Guida di Sopravvivenza4617 -
Gerber - G0751 - Bear Grylls Ultimate Fixed Blade - coltello
L'ultimate knife è il fiore all'occhiello della serie survival sviluppata in collaborazione con Bear Grylls.
Disegnato dietro strette indicazioni di Bear, è carico di innovazioni che non è possibile trovare su altri modelli a lama fissa.
Destinazione d'uso: Utility
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 7Cr17MoV
Trattamento Lama: Nitrurazione
Manicatura: Gomma antiscivolo e Nylon
Lunghezza lama: 120mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 255mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: Cordura con guscio rigido in Nylon
Confezione: Scatola con loghi Gerber/Bear Grylls
Note: acciarino incluso - affilatore al diamante
Caratteristiche del coltello:
- Lama drop point in acciaio inox parzialmente seghettata
- Impugnatura ergonomica in gomma texturizzata per massimizzare il comfort e massimizzare il grip della presa
- Pomolo in acciaio inox, ideale per essere utilizzato come martello
- Battente per acciarino integrato nel dorso della lama
- Fischietto di emergenza integrato con il lacciolo di sicurezza
Caratteristiche del fodero:
- Fodero in Nylon
- Acciarino al ferro-cerio integrato
- Affilatore al diamante integrato
- Piccolo manuale di emergenza con consigli di sopravvivenza di Bear Grylls
Il consiglio di Bear Grylls:
“Il compagno delle mie avventure più estreme, senza di lui non mi sentirei al sicuro. Un'impugnatura super grippante è essenziale nella natura ed un fodero così ricco ben concepito aiuta a tenere tutto a portata di mano in caso di emergenza."4613 -
Gerber - G31-002289 - Bear Grylls Parang Carbon Steel - Machete
Nuova versione con lama in acciaio al carbonio
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio al carbonio 1055
Trattamento Lama: Nitrurazione al Titanio
Manicatura: nylon e gomma antiscivolo
Lunghezza lama: 345mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 500mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 550g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Blister con loghi Gerber ed immagini di Bear Grylls
Note: -
Parang
Il Parang è una rivisitazione moderna del classico machete tribale utilizzato nella jungla. La sua pesante lama è l'ideale per tagliare arbusti e sterpaglie. Un attrezzo indispensabile nelle foreste.
- Lama curva, ideale per sfruttare al massimo l'inerzia dei colpi
- Robusta lama in acciaio inox; massima resistenza alla corrosione e facile da riaffilare
- Costruzione Full Tang per aumentare la robustezza
- Impugnatura ergonomica in gomma texturizzata per massimizzare il comfort e massimizzare il grip della presa
- Corda di sicurezza
- Fodero in nylon, leggero e robustissimo
- Piccolo manuale di emergenza con consigli di sopravvivenza di Bear Grylls
Il consiglio di Bear Grylls:
“Questo è il machete che porto sempre con me quando devo attraversare una jungla. Pratico ed efficace, è basato sui classici disegni dei machete tribali.”4609 -
Gerber - L.H.R. Larsen Harsey Reeve - 30-000183 - coltello
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: in acciaio inox 420HC
Trattamento Lama: TiNi - Nitrurazione al Titanio
Produzione Lama: USA
Manicatura: TacHide, antiscivolo
Lunghezza lama: 175mm.
Spessore della lama: 5,5mm.
Lunghezza totale: 314mm.
Bilanciatura: sulla guardia
Peso: 332g. (636g. con fodero)
Fodero: in ABS, con sicura all'estrazione
Note: progettato da Matt Larsen (esperto di Close Quarter Combat), William Harsey Jr. e Chris Reeve (noti coltellinai custom).5829 -
Gerber - Prodigy Combat Black - coltello
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: in acciaio inox 12C27
Trattamento Lama: TiNi - Nitrurazione al Titanio
Produzione Lama: USA
Manicatura: antiscivolo in fiberglass e nylon
Lunghezza lama: 120mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata di 1cm.
Peso: 205g.
Fodero: in Nylon e polimeri antiscivolo fire retardant,
Note: Skullcrasher/Martello4616 -
Gerber - Prodigy Tanto Urban Camo 0558 - coltello
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: in acciaio inox 12C27 punta tanto
Trattamento Lama: TiNi - Nitrurazione al Titanio
Produzione Lama: USA
Manicatura: antiscivolo in fiberglass e nylon
Lunghezza lama: 120mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata di 1cm.
Peso: 205g.
Fodero: in Nylon e polimeri antiscivolo fire retardant, camo
Note: Skullcrasher/Martello4616T -
Gerber - Profile Fixed Blade - 41795 coltello
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: in acciaio inox 12C27
Produzione Lama: Cina
Manicatura: kraton
Lunghezza lama: 90mm.
Spessore della lama: 3mm.
Lunghezza totale: 220mm.
Bilanciatura: arretrata di 2cm.
Peso: 178g.
Fodero: in Nylon e polimeri antiscivolo fire retardant,
Note: Skullcrasher/Martello4614 -
Chris Reeve - Green Beret 7 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0012