Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

 

Fascinating knife used by the Japanese farmer "Higonokami kanekoma."

As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.

The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.

Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob Dozier

Charming knife used by the Japanese farmer.

As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.

The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.

It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.

Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:

Intended use: Sportsman / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Intended use: Sportsman / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert Carter

Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife

Charming knife used by the Japanese farmer " Higonokami kanekoma ."

As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.

The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .

It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .

production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters

Destinazione d'uso: Sportivo / EDC

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 158g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Utilitac II
Note: Design by Joe Pardue