Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Poliwog Knife C98F - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.
Intended use: Sporting / EDC
Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -AP-C98F -
Spyderco - Cricket Knife - C29BK - ATS-55 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratoryIntended use: Sporting
Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.AP-C29BK -
Spyderco - 1997 Calypso Jr. Experiment PLN Micarta - C52BMP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDC / Collection
Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.C52BMP-CP -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Spyderco - Military - Natural G-10 & CPM-M4 Black DLC - Exclusive Edition - C36GM4BK - Knife
Intended Use: Collection / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210C36GM4BK -
Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file
Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.
Features:
coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel
History of the coin:
The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914BDYB37 -
Guardian Tactical - Conix - G10 Blackwashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Blackwashed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0006 serial number imprinted on the clipGT-81611 -
Guardian Tactical - Conix - G10 Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0019 serial number imprinted on the clipGT-81511 -
Guardian Tactical - Conix - Carbon Fiber Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0027 serial number imprinted on the clipGT-82511 -
Guardian Tactical - Conix - Carbon Fiber Two Tone - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Dual Tone - Stone Washed + PVD
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0024 serial number imprinted on the clipGT-82211 -
Spyderco - Native 5 - Maxamet Sprint Run - C41PGY5 - knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint runC41PGY5 -
Spyderco - Endura 4 Knife - Titanium and Damascus - C10TIPD - knife
Intended Use: Collection
Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.C10TIPD