Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.

Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specifications

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

This is a knife designed to excel in the EDC (Everyday Carry) role. It has the right size, shape, and look for EDC.

Destinazione d'uso: collection / tactical / military

Tipo di produzione: industrial
Lama: D2 steel 60-61 HRC
Finitura lama: Stonewashed
Impugnatura: G10
Lunghezza lama: 74mm.
Spessore della lama: 4mm.
Lunghezza totale: 180mm.
Bilanciatura: arretrata
Peso: 90g.
Clip: reversibile
Note: -

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Knife from a private collection

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Survival

Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.

Intended use: Sports / Collection

Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.

Intended use: Sports / Collection

Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 110 mm
Handle material: Titanium
Color:
Weight: 98 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: Italy

Intended use: collection / tactical / military

Type of production: industrial
Blade: CTS XHP 61-63 hrc stainless steel
Blade finish: satin
Handle: black micarta
Blade length: 76mm.
Blade thickness: 4mm.
Total length: 185mm.
Balancing: backward
Weight: 147 g.
Clip: reversible
Note:

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.

Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.

This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades.

Intended use: Sports / Collection

Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: red G10
Color: Black PVD Coating
Weight: 64 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.

The Dellatorre is an elegant knife with an innovative design that redefines the classic pocket knife. Its name derives from the Val della Torre, a city located on the picturesque foothills of Piedmont, where Sandrin knives are born and worked.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.

Intended use: Sports / Collection

Total length: 180mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.

Sharper, thinner and harder than any blade ever made, TCK is an ultra-thin and easily portable folder.

This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.

Intended use: Sports / Collection

Total length: 198mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 80mm
Handle thickness: 6 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 60 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: Italy

With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.

The Lanzo, with its wave-shaped blade, is designed for cutting and slicing when you are not looking for a tipless knife. It takes its name from the winding "road" located at the foot of Piedmont, Italy, where Sandrin knives are born and made.
This sleek design made from patented tungsten carbide with Sandrin's patented StaySharp Technology ™ keeps a clean, sharp edge longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / Collection

Total length: 180 mm
Blade length: 79 mm
Blade thickness: 0.0889 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98 mm
Handle thickness: 10.5 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slip joint
Country of production: Italy

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019

Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.

Features:

coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel

History of the coin:

The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended use: hunting

Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -

Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate

Rockstead - SAI Titanium ZDP-189 - knife

Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel Aus-8
Treatment Blade: Hardcased Black Ti-Ni
Handle: Black Linen Micarta
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 112mm.
Overall length: 198mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Stainless steel removable and reversible TiNi
Sheath: -
Packaging: Cardboard box with logos SOG
Notes: Design by Kiku Matsuda

Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

The SOG Toothlock knife model TK-01 has a unique feature you will not find in other knives. The locking mechanism integrated into the handle nudges the blade ajar when the user slides it backward. This nudging action gets the blade started out of the handle, and with the flick of the wrist, the user can pop the blade out in a hurry. This combined motion makes for a very fast opening knife. The shape of the blade is fabulous and has VG-10 laminated onto its surface for a razor sharp edge and excellent retention. The handle is made of sturdy Zytel with textured grooves and grips. A bayonet style clips is mounted on the end of the knife for a nice, deep carry.

• Blade Length: 3 inches
• Overall Length: 7.3125 inches
• Weight: 3.3 oz
• Blade Material: VG-10
• Handle Material: Zytel
• In Stock: more than 10

Intended Use: Hunting

Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -

Sog - Spec-Elite Mini - SE01 - knife

Intended Use: Tactical / Sport

Type of production: Industrial Production Blade:
Japan Blade: stainless steel VG-10 59/60HRC
Treatment Lama: -
Handle: GRN - Glass Reinforced Nylon
Blade length: 70mm.
Blade thickness: 3.4mm.
Closed Length: 93mm.
Total length: 165mm.
Thick when closed: -
Balance: -
Weight: 76.5g.
Closure: Arc-Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos SOG
Notes: -

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 2019

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production since
* Condition: in excellent condition, like new
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: GRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed length: 114mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 113g.
Closure: Arc-Lock Pendulum
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with SOG logos
Note: -

Sog - Spec-Elite 1 - SE14 - knife

Intended Use: Military / Sports

Type of production: industrial
Blade: AUS-8 stainless steel
Production Blade: Seki - Japan
Handle: Zytel
Blade length: 100mm.
Blade Thickness: 3.5mm.
Closed Length: 120mm.
Overall Length: 220mm.
Balance: -
Weight: 120g.
Closure: Arc Lock
Clip: Reversible and removable stainless steel
Sheath: -
Notes: -

SOG - Vulcan - VL-01 - knife

Intended Use: sports

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Handle: Zytel and steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 120mm.
Total length: 210mm.
Thick when closed: 20mm.
Balance: -
Weight: 135g.
Closure: Arc Lock
Clip: removable stainless steel
Packaging: cardboard box with black and gray logos SOG
Notes: -