Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Ka-Bar - Dozier Folding Hunter knife 4062D2 - Coyote Blue Zytel Handle - knife
Intended use: tactical
Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4062D2 -
Ka-Bar - Becker Folder - BK40 - knife
Intended Use: Sporting / Light Utility
Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -KB-BK40 -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Ka-Bar - Jarosz Spear Point Flipper knife 7509 - titanium handle - knife
Destination of use: tactical
Blade: stainless steel AUS 8A
Handle: titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 215mm.
balancing:
Weight: 124g.
Closing: frame lock
Opening: pinball
Clip: in steel
Sheath: Nylon
Design: by Jesse Jarosz
Production: TaiwanKB-7509 -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Ka-Bar - USSF Space Force Corser Folder Knife 5698SF - Blue GFN - knife
Intended Use: Sporting / Collection
Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logosKB-5698SF -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Ka-Bar - Dozier Folding Hunter knife 4062FG - Green Zytel Handle - knife
Intended use: tactical
Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steelDesign: by Bob Dozier
Production: TaiwanKB-4062FG -
Rick Hinderer Knives - XM-24 - Spearpoint 4.0" - Bronze Ti Custom Set - Coltello
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN 61 / 62HRC stainless steel
Blade treatment: stonewashed
Handle: titanium and G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Total length: 234mm.
Weight: 220g.
Closure: FrameLock
Clip: titanium, removable
Notes: custom version with screws and accessories in anodized bronze titanium
Additions compared to the standard model:
* Pivot screw in bronzed titanium
* 3 front screws in bronzed titanium
* 3 spacers in bronzed titanium
* Rear stabilizer lockbar in bronzed titanium
* Clip in bronzed titanium
* Clip cover in bronzed titaniumXM24TIB -
Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file
Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.
Features:
coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel
History of the coin:
The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914BDYB37 -
Rick Hinderer Knives - Half Track G10 Green - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Green
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSOD -
Rick Hinderer Knives - Half Track Ti - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 125g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009STSTI -
Rick Hinderer Knives - Half Track G10 Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSBL -
Rick Hinderer Knives - XM-24 - Spearpoint 4.0 "G10 Brown - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: Spear Point CPM-S35VN Stainless Steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: titanium and brown G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Overall length: 234mm.
Weight: 220g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K30030SP20 -
Rick Hinderer Knives - XM-18 - Fatty Harpoon Both Edition Black 3.5 "G10 - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 89mm.
Blade thickness: 4.5 mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 164g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2506SGSBL -
Rick Hinderer Knives - XM-18 - Bowie 3.5 "G10 Green / Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Green / Black
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 154g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2032SGSGB -
Rick Hinderer Knives - XM-18 - Spearpoint 3.0 "Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 76mm.
Blade thickness: 3.5 mm.
Closed Length: 106mm.
Overall length: 179mm.
Thickness when closed: 11mm.
Weight: 96g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K10810SPBL -
Hinderer Knives - XM-24 - Custom Grind Slicer - Carbon Fiber with Anodized Titanium - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: handcrafted by Rick Hinderer, CPM-S35VN 61 / 62HRC stainless steel, with double concave beveling
Blade treatment: Hand satin
Handle: grip plate in the liner thickness of titanium 1mm 6AL4V 3.5mm carbon fiber with blue anodizing. Frame titanium blue anodized 6AL4V, billet, thick 4.5mm with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 100mm.
Blade thickness: 4.5mm.
Closed Length: 135mm.
Overall length: 233mm.
Thick when closed: 15mm.
Weight: 210g.
Lock: Frame Lock type
Clip: blue anodized titanium
Notes: Lanyard black paracord with titanium wire stop 6AL4V blue anodized, billet, with a diameter of 9mm, custom by Rick Hinderer12479 -
Hinderer Knives - XM-18 - Spanto 3.5" Gen IV - Carbon Fiber with Flaming Horse Clip - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: CPM-S35VN Stainless Steel 61 / 62HRC
Blade treatment: Stonewashed
Handle: grip plate in 3mm carbon fiber liner of titanium 6AL4V 1mm thick. Frame titanium 6AL4V, billet, 4mm thick with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 120mm.
Overall length: 270mm.
Thick when closed: 13mm.
Weight: 175g.
Lock: Frame Lock type
Clip: 17-4 PH stainless steel, custom by Rick Hinderer, with Flaming Horse Design
Notes: Lanyard black paracord with wire stop in 6AL4V titanium billet, with a diameter of 9mm, custom by Rick Hinderer12478 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock