Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Sandrin knives - Torino knife FC - Recoil Lock - Tungsten Carbide Blade - Carbon Fiber - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.
This elegant knife, made with Sandrin's patented tungsten carbide blade with StaySharp Technology ™, keeps a clean and sharp edge longer than traditional steel blades.
Intended use: Sports / Collection
Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: Carbon fiber
Color: Black PVD Coating
Weight: 63 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: ItalySK-TORINO-FC -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Buck - Buck 345 Vantage large - 0345BKS - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper systemAP0345BKS -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Sandrin knives - Monza Zirconium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-Z -
Sandrin knives - Monza Titanium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 110 mm
Handle material: Titanium
Color:
Weight: 98 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-T -
Sandrin knives - Torino knife - Recoil Lock - Tungsten Carbide Blade - G-10 Red - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades.
Intended use: Sports / Collection
Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: red G10
Color: Black PVD Coating
Weight: 64 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: ItalySK-TORINO -
Sandrin knives - Sandrin knives - Dellatorre SK-1 Slipjoint knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
The Dellatorre is an elegant knife with an innovative design that redefines the classic pocket knife. Its name derives from the Val della Torre, a city located on the picturesque foothills of Piedmont, where Sandrin knives are born and worked.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.Intended use: Sports / Collection
Total length: 180mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: ItalySK-1 -
Sandrin knives - TCK 2.0 Slipjoint knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
Sharper, thinner and harder than any blade ever made, TCK is an ultra-thin and easily portable folder.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / Collection
Total length: 198mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 80mm
Handle thickness: 6 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 60 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: ItalyTCK2.0 -
Sandrin knives - Lanzo SK-2 knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
The Lanzo, with its wave-shaped blade, is designed for cutting and slicing when you are not looking for a tipless knife. It takes its name from the winding "road" located at the foot of Piedmont, Italy, where Sandrin knives are born and made.
This sleek design made from patented tungsten carbide with Sandrin's patented StaySharp Technology ™ keeps a clean, sharp edge longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / CollectionTotal length: 180 mm
Blade length: 79 mm
Blade thickness: 0.0889 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98 mm
Handle thickness: 10.5 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slip joint
Country of production: ItalySK-2 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file
Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.
Features:
coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel
History of the coin:
The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914BDYB37 -
Buck - Vantage Force Pro Combo - 0847BLX-B - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Lama USA
Blade: CPM-S30V stainless steel
Blade treatment: nitriding Titanium
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed Length: 112mm.
Overall length: 190mm.
Thick when closed: 11mm.
Balancing: -
Weight: 134g.
Lock: Liner Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Buck logos
Notes: Hardened by Paul Bos2828B-COMBO -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Buck - Hunt Foldover 11100 - knife
Buck - Hunt Foldover 11100 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 122mm.
Total length: 215mm.
Thick when closed: 16mm.
Balance: -
Weight: 210g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -B11100 -
Buck - King Charles 550 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 185mm.
Thick when closed: 13mm.
Balance: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -buck -
Buck Lightning HTA II Pocket Knife - Model 175 - knife
Intended use: Sport
Type of production: Industrial
Production Lama USA
Blade: Stainless steel Aus-6
Treatment Lama: -
Handle material: aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 76g.
Lock: Liner Lock
Clip: Reversible and removable steel
Sheath: -
Packaging: cardboard box with logos Buck
Notes: -00175 -
Buck 171 Mayo Waimea BOS S30V Titanium Framelock Folding Pocket knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box00171 -
-
Buck - Vantage Force Pro - 0847BLS coltello
DISPONIBILE UNICAMENTE CON LAMA PARZIALMENTE SEGHETTATA Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Nitrurazione al Titanio
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 190mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Liner Lock
Clip: Reversibile e amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Buck
Note: Temprato da Paul Bos2828B -
Buck - Vantage Force Pro A-TACS Camouflage - 0845CMS-B coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stonewash
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 190mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Liner Lock
Clip: Reversibile e amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Buck
Note: Temprato da Paul Bos2828CAMO -
Buck - Vantage Force Pro Marine - 0847ODX-B - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stonewashed
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 190mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 134g.
Chiusura: Liner Lock
Clip: Reversibile e amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Buck
Note: Temprato da Paul Bos2828G -
Buck/TOPS - CSAR-T Knife - Black G-10 + Multitool Set - 0095BKSTP-B - knife
Collaboration between TOPS and BUCK for this CSAR-T 095, designed as a heavy-duty pocket knife for use by military professionals.
The shape of the blade is "modified tanto." This means that the traditional angle of a tanto blade is slightly curved. It is extremely strong, with a thickness of 4.4 mm and a weight of 247 grams.
The ring at the end of the handle can be used as a screwdriver, using the tool kit already provided, and + it is possible to use standard drill bits that also fit the drill. The included nylon sheath is MOLLE compatible, but can also be worn on a belt.
Intended use: Sporting / Multi-role / Military
Blade: stainless steel ATS-34
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 87mm.
Blade thickness: 4.5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 244g.
Closure: Liner Lock
Clip: removable stainless steel
Sheath: Nylon
Packaging: Unboxed/packaged, sold loose with its own sheath the screwdriver kits
Notes: Hardened by BOS - Screwdriver and extension set included0095BKSTP-B