Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 10 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Chris Reeve - Large Sebenza - Classic 2000 Micarta + Leather Sheath - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition, with a few small marks due to time.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small marks due to being placed in the scabbard and the passage of time.
* Box: Present and complete
* Scabbard: Present (not included at the time, but sold separately), original, brown leather, well maintained
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Sportsman
Type of production: Handcrafted
Country of Production: USA
Blade: CPM-S30V 58/59HRC stainless steel
Handle: micro-bead-blasted titanium with Black Canvas Micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 17mm.
Weight: 125g.
Closure: Frame Lock
Clip: removable, in micropallinated titanium
Packaging: December 2006 "Sebenza Classic MM" version - Previously purchased, from private collection - Full set, complete with white cardboard box with Chris Reeve logos and warranty certificates, original leather sheath with Chris Reeve logosCR-LSCMMM-CP -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Chris Reeve - Large Sebenza 31 Plain Tanto - MagnaCut & Titanium - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted
Blade length: 91.7mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 213.5mm.
Weight: 133g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-L31-1010 -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Chris Reeve - Large Sebenza 21 Plain knife - Insingo - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection, Chris Reeve model out of production and no longer available on the market. In excellent condition, complete with original box, certificates, stickers, cleaning cloth, fluorinated grease and maintenance key - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008-CP -
Aitor - Cocker navaja knife - 345.180 - 6.5 cm - knife
Vintage folding knife made by the well-known Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood with Cocker engraving
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 163mm.
Balancing:
Weight: 83g.
Blade lock: back lock345.180 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Aitor - Brama navaja knife - knife
Vintage folding knife made by the famous Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 200mm.
balancing:
Weight: 130g.
Sheath: -AI-BR -
Smith & Wesson - S.W.A.T. Utility Folder Knife - SW24-7B - tactical knife
Intended use: sports
Type of production: industrial
Blade: full tang in 440B stainless steel
Blade treatment: -
Lama production: China
Handle: kryton
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Weight: 102g.
Closing: -
Clip: in steel
Sheath: -
Note: -SW24-7B€45.08Out of stock -
Begg Knives - Kwaiken Frame Lock Carbon Fiber Inlays Blue Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MKW-CF-BLKB -
Begg Knives - Kwaiken Frame Lock Carbon Fiber Inlays Gold Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MKW-CF-BLKG -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays Gold Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F-G -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays Blue Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F-B -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F -
Begg Knives - Mini Glimpse Frame Lock Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MG-CF-BLK -
Begg Knives - Mini Glimpse Companion OD Green Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MG-ODG -
Chris Reeve - Large Inkosi - Insingo Blade - knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1022 -
Chris Reeve - Small Inkosi - Insingo Blade - knife
Intended use: Sports / Collection
Type of production: Semi-Artisan
Country of production: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Blade treatment: stonewashed
Handle: titanium 6Al4V
Blade length: 70mm.
Blade thickness: 3.5mm.
Length closed: 95mm.
Total length: 165mm.
Thick when closed: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfibre cloth, maintenance kit
Note: -SIN-1022 -
Coin knife - Meiji Dragon Yen 1870-1914 - multipurpose with blade, scissor and file
Japanese multipurpose made of blade, scissor and file, inserted inside two coins that faithfully reproduce the Japanese Yen coined during the Meiji period 1870-1914.
Features:
coin diameter: 38mm.
weight: 30 gr.
blade length: 2cm
thickness: 5.5 mm
blade material: 420J2 steel
History of the coin:
The introduction of the yen occurred in 1872 by the Meiji government and replaced by an excessively complex monetary system of the Edo period.Initially, the yen was minted in gold, until 1888 and then moved to silver, until 1914BDYB37 -
Chris Reeve - Umnumzaan Clip Plain - folding knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -UMN-1000 -
Chris Reeve - Small Inkosi knife - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium inlay
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -SIN-1000 -
Chris Reeve - Small Sebenza 21 Cross Hatch - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium
Blade Length: 75mm.
Blade thickness: 3.5mm.
Closed length: 100mm.
Total Length: 175mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -S21-1036 -
Chris Reeve - Large Sebenza 21 - Plain Insingo - knife
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008 -
Chris Reeve - Large Inkosi - folding knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1000 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410203 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410980 -
Aitor - Desollador 347 180 - knife
Aitor - Desollador 347 180 - knife
Vintage folding knife made by famous Spanish house Aitor
Intended use: Sport
Type of production: semi-homemade
Blade: Stainless steel 440
Treatment Blade: -
Production Lama: Spanish
Handle material: brass and wood
Blade length: 70mm.
Blade Thickness: 4mm.
Overall length: 200mm.
balancing:
Weight: 136g.
Sheath: -347.180 -
Aitor - Luchadera 349.180 - coltello
Coltello chiudibile vintage realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: semi-artigianale
Lama: in acciaio inox 440
Trattamento Lama: -
Produzione Lama: spagnola
Manicatura: ottone e legno
Lunghezza lama: 150mm.
Spessore della lama: 4mm.
Lunghezza totale: 345mm.
Bilanciatura:
Peso: 628g.
Fodero: -349.180 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Chris Reeve - Glorious Computer Graphic - Large Sebenza 21 - knife
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio 6AL4V, con incisioni Computer Graphic
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 207mm.
Spessore da chiuso: 17mm
Peso: 125g.
Chiusura: Frame Lock
Clip: amovibile, in titanio
Confezione: scatola in cartone bianco con loghi Chris Reeve e certificati di garanzia, olio lubrificante, custodia da tasca in cuoio e panno in microfibra per la manutenzione10853 -
Chris Reeve - New Sebenza 25 - knife
Sebenza 25:
Making the Best Even Better
Virtually every year since the inception of the Sebenza in 1987 has seen small, incremental developments, improvements and changes. Celebrating the 25th anniversary of the Sebenza in 2012, Chris brought some new concepts to the Sebenza 25.
• Large Hollow Grind Technology—the first blade to feature this new grind that blends the best of hollow and flat grinds.
• Shaped phosphor bronze washer on the lock side brings additional stability to that side of the blade.
• One-eighth inch ceramic ball acts as the interface between the lock bar and the blade, and doubles to drop into the detent, ensuring the blade stays in place when closed.
• Larger perforations in the washers reduce friction, store more lubricant and offer space for small dirt particles to move away from the blade/washer interface, helping to prevent blade action from becoming “sticky”.
• 416 Heat treated stainless steel stop pin is interference fit into the lock side of the handle.
• Asymmetrical pattern thumb serrations on a curved thumb ramp of the blade give excellent purchase.
At 0.140” (3.56mm), the blade is more robust than previous Sebenza models.
SPECIFICATIONS:
Blade Material:
CPM S35VN Stainless Steel
Blade Hardness:
58-59 RC
Blade Length:
Large - 3.625" (92 mm)
Blade Thickness:
0.14" (3.56 mm)
Overall Length:
8.335" (212 mm)
Handle Length:
4.71" (147.64 mm)
Handle Material:
6Al4V Titanium
Handle Thickness:
0.150" (3.8 mm)
Weight:
5.2 oz. (145 g)
Fittings:
303 Stainless Steel
Double Thumblugs:
6Al4V Titanium
Pocket Clip:
6Al4V Titaniumsebenza25 -
Chris Reeve - Mnandi Elder Burl Inlay - knife
Intended use: Collection / Sports
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium and Radica
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 91mm.
Total length: 156mm.
balance:
Weight: 40g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: Leather
Notes: Production certificate included: production date July 30, 2013 - Mnandi in Zulu means "very nice"0019R -
Chris Reeve - Large Sebenza 21 Inlay - Insigo Micarta - knife
Intended use: collection / sport
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Manicure: Titanium with micarta inserts
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 128g.
Closure: Frame Lock
Clip: removable, titanium
Packing: white cardboard box with Chris Reeve logos and warranty certificatesL21-1148 -
Chris Reeve - Small Sebenza 21 - Insingo Micarta
Intended Use: collection / sports
Type of production: Semi-Craft
Blade Production: USA Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium with polished inserts micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Total length: 175mm.
Thick when closed: 17mm
Weight: 82g. Closure: Frame Lock
Clip: removable titanium
Packaging: cardboard box with white logos Chris Reeve and warranty certificates
Notes: The word "Sebenza" in Zulu means "Work", while the word "Insingo" in Zulu means "Razor"0031I -
Chris Reeve - Mnandi Gabon Ebony Inlay - coltello
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio ed Ebano
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: Certificato di produzione incluso: data di produzione 23 luglio 2012 - mnandi in zulu significa "molto bello"0019E -
Chris Reeve - Large Sebenza 21 - African Blackwood - coltello
Destinazione d'uso: collezione
Tipo di produzione: Artigianale
Produzione Lama: USA
Lama: in acciaio inox CPM-S30V 58/59HRC
Manicatura: Titanio lucidato e inserto African Blackwood
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 207mm.
Spessore da chiuso: 17mm
Peso: 125g.
Chiusura: Frame Lock
Clip: amovibile, in titanio
Confezione: scatola in cartone bianco con loghi Chris Reeve e certificati di garanzia0033 -
Chris Reeve - Large Sebenza 21 Cross Hatch - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Balance: -
Weight: 130g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -L21-1036 -
Chris Reeve - Mnandi Bocote - coltello
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio e Bocote
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: mnandi in zulu significa "molto bello"0019 -
Chris Reeve - Small Inkosi Inlay micarta natural canvas - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium inlay
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -SIN-1014 -
Chris Reeve - Small Sebenza 21 - Diamond Plate - knife
Coltelleria Collini is Chris Reeve official dealer for Italy
Destinaation: collection/sporting
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium
Blade Length: 73mm.
Blade Thickness: 3mm.
Length Closed: 98mm.
Total Length: 175mm.
Balancing: -
Weight: 80g.
Locking system: Frame Lock
Clip: Titanium
Notes: -0036D -
Chris Reeve - Small Sebenza 21 - Eyes of the Tiger - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox CPM-S30V 58/59HRC
Manicatura: Titanio lucidato con grafica computerizzata "Eyes of the Tiger"
Lunghezza lama: 73mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 98mm.
Lunghezza totale: 175mm.
Bilanciatura: -
Peso: 80g.
Chiusura: Frame Lock
Clip: in titanio
Note: Esemplare fuori catalogo, non più in produzione e non più reperibile, con certificato di garanzia e produzione datato 9 Marzo 200910948 -
Chris Reeve - Small Sebenza 21 - Granato Almandino - Unique Graphic
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox CPM-S30V 58/59HRC
Manicatura: Titanio lucidato con grafica computerizzata "Unique Graphic" e Granato Almandino con taglio cabochon incastonato
Lunghezza lama: 73mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 98mm.
Lunghezza totale: 175mm.
Bilanciatura: -
Peso: 80g.
Chiusura: Frame Lock
Clip: in titanio
Note: -0036A -
Chris Reeve - Small Sebenza 21 - knife
The Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Intended use: Collection / Sports
Blade: stainless steel CPM-S35VN 58/59 HRC stonewashed
Handle: Titanium
Blade length: 72mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Total length: 172mm.
Balance: -
Weight: 82g.
Closure: Frame Lock
Clip: Titanium
Sheath: -
Notes: -0015 -
Chris Reeve - Ti-Lock design by Grant and Gavin Hawk knife
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so we can offer greater design freedom. Fully ambidextrous, the Ti-Lock does not want to be a mere exercise in style, but must be understood as an innovation and mechanics as a solid and reliable evidence of the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sport / Collection
Type of production: Semi-Craft
Production Lama USA
Blade: stainless steel CPM-S35VN 58/59HRC
Treatment Blade: Stonewashed
Handle: Titanium 6AI4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Closed Length: 100mm.
Total length: 182.5mm.
Thick when closed: -
Balance: -
Weight: 85g.
Closure: Ti-Lock Titanium 6AI4V
Clip: Titanium 6AI4V
Sheath: -
Packaging: Cardboard box with logos Chris Reeve
Notes: Design by Grant and Gavin Hawk0037 -
Chris Reeve - Ti-Lock Stone Washed - design by Grant and Gavin Hawk knife
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so we can offer greater design freedom. Fully ambidextrous, the Ti-Lock does not want to be a mere exercise in style, but must be understood as an innovation and mechanics as a solid and reliable evidence of the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sport / Collection
Type of production: Semi-Craft
Production Lama USA
Blade: stainless steel CPM-S35VN 58/59HRC
Treatment Blade: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Closed Length: 100mm.
Total length: 182.5mm.
Thick when closed: -
Balance: -
Weight: 85g.
Closure: Ti-Lock Titanium 6AI4V
Clip: Titanium 6AI4V
Sheath: -
Packaging: Cardboard box with logos Chris Reeve
Notes: Design by Grant and Gavin Hawk0037SW -
Chris Reeve - Umnumzaan Plain Tanto knife - folding knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -UMN-1002 -
Chris Reeve - Large Sebenza 21 - coltello Micarta
Destinazione d'uso: collezione
Tipo di produzione: Artigianale
Produzione Lama: USA
Lama: in acciaio inox CPM-S30V 58/59HRC
Manicatura: Titanio lucidato e inserto in micarta
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 207mm.
Spessore da chiuso: 17mm
Peso: 125g.
Chiusura: Frame Lock
Clip: amovibile, in titanio
Confezione: scatola in cartone bianco con loghi Chris Reeve e certificati di garanzia0032