Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - Rescue Karambit G10 UV Yellow - FX-599 RSY - Knife
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Stonewashed
Grip: steel folders, G10 grips sensitive to UV rays
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RSY -
Fox - Rescue Karambit G10 Nero - FX-599 RS - Coltello
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Teflon coating
Grip: steel folders, G10 grips
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RS -
Fox - FKMD - E.R.T. Rescue Black - FX-213 TS knife
Type of production: industrial
Blade: Stainless steel N690Co
Treatment Blade: Teflon
Handle material: ABS resin with non-slip inserts
Blade length: 78mm.
Blade Thickness: 5mm.
Closed Length: 120mm.
Total length: 200mm.
Balance: -
Weight: 172g.
Lock: Liner Lock
Clip: removable stainless steel;
Sheath: Kydex with spring attachments
Notes: multi-purpose knife, evacuation hammer, screwdriver bits 2FX-213TS -
Fox - A.L.S.R. Green G10 Rescue Knife - FX-447COD - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in good condition, with a few small marks that do not affect its use.
* Commercially available: discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Some non-removable adhesive residue.
* Marks on handle: Small signs of wear on the clip's paintwork.
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Emergency / Rescue / Multipurpose Tactical
Country of Production: Italy
Blade: N690Co stainless steel with DLC treatment
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 150mm.
Total length: 240mm.
Weight: 178g.
Closure: Liner Lock
Clip: teflonized steel black reversible
Sheath: cordura, belt-mounted
Notes: emergency rear belt cutter, glass breaker on tangFX-447ALSR-CP -
Fox - FKMD - 49° Capricorn - FX-ALSR-49 - knife
Designed to solve emergency and survival situations, it is particularly suitable for its characteristics as equipment for pilots, aircraft crews and paratroopers.
This knife is currently supplied to the 49th "Capricorn" Air Cavalry Helicopter Squadron Group stationed at the "Francesco Baracca" barracks in Casarsa della Delizia (PN) with tasks of armed reconnaissance, armed escorts, attack, deep attack, precision attack, fire support, suppression of air defense centers and security. They also contributed from the sky to the ground security of the Italian contingents in Somalia, Albania, Kosovo.
Intended use: Tactical
Blade: N690Co stainless steel
Lama Italy production
Handle: G-10 black
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 145mm.
Total length: 240mm.
Balancing: -
Weight: 230g.
Closure: Liner Lock
Clip: removable, in stainless steel
Sheath: rigid, thigh, in green nylon
Notes: emergency belt cutter, wood saw with liner lock closure - double safety lock to prevent blade closureFX-ALSR-49 -
Fox/Combative Edge - M1S Serrated knife - PRIVATE COLLECTION - CED-01S - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory
Intended use: Tactical / CollectionType of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade Treatment: DLC
Handle: G-10 and titanium
Blade length: 95mm. partially serrated edge
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 225mm.
Thickness when closed without clip: 10mm.
Balancing: -
Weight: 152g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -AP-CED-01S -
Fox - Sailing Knife - FX-235 - Boat utility knife
Intended use: knife for sailors
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 420 54 / 54HRC
Blade treatment: satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 105mm
Overall length: 180mm.
Weight: 155g.
Lock: Liner Lock
Packaging: cardboard box with Fox logos
Notes: untie knots, multipurpose tool12511 -
Fox - Aeronautica Militare - FX-026900 coltello
Il nuovo coltello Fox che ha vinto la gara d'appalto per entrare nella dotazione dei piloti dell'Aeronautica Militare Italiana.
Un robusto multiuso che, oltre alla lama principale con punta tanto e filo parzialmente seghettato, è dotato di seghetto per legno e lama rescue (per il taglio, ad es., delle cinture di sicurezza) ad apertura automatica.
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: DLC
Manicatura: G-10 / alluminio anticorodal
Lunghezza lama principale: 95mm.
Spessore lama principale: 3mm.
Lama secondaria: seghetto da legno, lunghezza 95mm, spessore 1mm
Lunghezza chiuso: 188mm.
Lunghezza totale: 283mm.
Spessore da chiuso: -.
Bilanciatura: -
Peso: 250g.
Chiusura: Back Lock (sia su lama, sia su seghetto)
Clip: -
Fodero: Cordura
Confezione: scatola per l'esposizione con scudetti dell'Aeronautica Militare italiana
Note: frangivetri utilizzabile impugnando il coltello "a martello", anello per l'aggancio7740 -
Fox - Citizen by Centofante - C105BK - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox 440C
Manicatura: alluminio anodizzato nero con inserti in gomma
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 94mm.
Lunghezza totale: 170mm.
Spessore da chiuso: 13mm.
Peso: 76g.
Chiusura: Frame Lock
Clip: Amovibile, in acciaio inox
Confezione: scatola in cartone e scatolina in alluminio con loghi Fox
Note: Design by Centofante e Vellekamp7191 -
Fox - Delta knife Spec Ops Col Moschin Big - FX-SOK09CM01E knife
Intended use: Tactical / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: DLC
Handle: G-10
Blade length: 110mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 245mm.
Thick when closed: 22mm.
Balancing: -
Weight: 246g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: cardboard box with FKMD and Col Moschin logos
Notes: Wave opening system under the Emerson licenseFX-SOK01E -
Fox - Delta Spec. Ops Col Moschin - Limited Edition - Cofanetto Coltelli
Edizione a tiratura limitata di 300 pezzi numerati sulla lama con confezione/espositore con fregi in metallodel Nono Reggimento D'assalto Paracadutisti "Col Moschin" e fodero esclusivo in Kydex, con attacchi multiposizione, per il modello Delta Big.
Fox - Delta Spec. Ops Col Moschin Small - FX-SOK09CM02B
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10
Lunghezza lama: 87mm.
Spessore lama: mm.
Lunghezza chiuso: 111mm.
Lunghezza totale: 197mm.
Spessore da chiuso: 20mm.
Bilanciatura: -
Peso: 146g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Note: Sistema di apertura Wave su licenza Emerson
Fox - Delta Spec. Ops Col Moschin Big - FX-SOK09CM01E
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10
Lunghezza lama: 110mm.
Spessore lama: 5mm.
Lunghezza chiuso: 137mm.
Lunghezza totale: 245mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 246g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Note: Sistema di apertura Wave su licenza Emerson
Note: cofanetto cartonato con loghi FKMD e Col Moschin - Edizione limitata e serializzata in soli 300 esemplari7222 -
Fox - Delta Spec. Ops Col Moschin Small - FX-SOK09CM02B knife
Intended Use: Tactical / Collection
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel 58HRC N690Co
Treatment Blade: DLC
Handle: G-10
Blade length: 87mm.
Blade thickness: 5mm.
Length closed: 111mm.
Total length: 197mm.
Thick when closed: 20mm.
Balance: -
Weight: 146g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos and FKMD Col Moschin
Notes: Opening system Wave license EmersonFX-SOK02B -
Fox - Folgore Tanto - FX-RCSTF-01 - knife
Intended use: Tactical / Military
Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co
Lama treatment: DLC
Handle: G-10 with stainless steel liners
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: 150mm.
Total length: 260mm.
Thick when closed: 20mm.
Balancing: -
Weight: 228g.
Closure: Liner Lock with safety lock
Clip: Removable in stainless steel
Sheath: Nylon Camouflage
Packaging: gray cardboard case with Fox logos
Notes: Knife currently supplied to the "Folgore Parachute Transmission Company" - Equipped with rear Skull Crasher and replaceable emergency harness5785 -
Fox - Kempo Bantay Folder by Borut Kincl - Black - SLO-01 - knife
Fox - Kempo Bantay Folder by Borut Kincl - Black - SLO-01 - knife
Blade: Stainless steel Teflon coated N690Co 58/60HRC
Handle: G10
Blade Length: 95mm.
Overall Length: 220mm.
Blade Thickness: 3.5 mm.
Closed Length: 120mm.
Weight: 130g.
Lock: Liner lock
Clip: Stainless steel, reversible
Notes: Design by Borut Kincl trainer special forces officer Slovenes "ESD (Enota za Specialno Delovanje)" Blade Lock Security System LAWKS and glass breaker
Sheath: Nylon Case includedFX-SLO-01-S -
Fox - Sailing Knife 233 - knife
Intended use: knife to sailors
Type of production: Industrial
Production Lama: Italy
Blade: 440A Stainless Steel 56 / 58HRC
Blade treatment: -
Handle: Aluminium Aeronautic
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 210g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fox logos
Notes: Untie knots forged - hole Gira crickets on the bladeFX-233 -
Fox/PI Knives - aX Dobolock - FX-301 coltello
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: 440C 57/58HRC
Trattamento Lama: Ti-Ni
Manicatura: Alluminio T6061
Lunghezza lama: 105mm.
Spessore lama: 4mm.
Lunghezza chiuso: 130mm.
Lunghezza totale: 235mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 125g.
Chiusura: Dobolock
Clip: in acciaio inox
Fodero: tasca in nylon con zip
Confezione: Scatola di cartone con loghi FOX
Note: vincitore dei Blade Awards 2011 nella categoria "design non americano più innovativo"7747 -
LoneWolf - Dark Raven Combo - knife
Intended Use: Tactical
Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -2791 -
Fox - FKMD - E.R.T. Rescue Orange - FX-213 SS knife
Intended Use: tactical / rescue
Type of production: industrial
Blade: Stainless steel N690Co
Lama treatment: sandblasting
Handle material: ABS resin with non-slip inserts
Blade length: 78mm.
Blade Thickness: 5mm.
Closed Length: 120mm.
Total length: 200mm.
Balance: -
Weight: 172g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: Kydex with spring attachments
Notes: multi-purpose knife, evacuation hammer, screwdriver bits 27750O