Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed
Handle: G10 OD Green
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 170g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -

Intended use: Tactical / Collective

Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Blackwashed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0006 serial number imprinted on the clip

Intended use: Tactical / Collective

Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Dual Tone - Stone Washed + PVD
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0024 serial number imprinted on the clip

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Guardian Tactical Use 100%, is a young American company specializing in the design and implementation of tactical knives. Guardian Tactical combines an obsessive and partly crafted with the use of modern and technologically advanced machinery in order to achieve almost perfect products and with very high quality performance.

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark Stonewash
Handle: Carbon Fiber
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 192mm.
Thick when closed: 14mm
Weight: 104g.
Lock: Frame Lock
Clip: removable, stainless steel
Packaging: Cardboard box with Guardian Tactical logos
Notes: Specimen with consecutive numbering and date of manufacture stamped on the blade and clips

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark Stonewash
Handle: G10 OD Green
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 115mm.
Overall length: 190mm.
Thick when closed: 15mm
Balancing: -
Weight: 106g.
Lock: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Black
Handle: aluminum
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Overall length: 172mm.
Thick when closed: 13mm
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed and Black
Handle: aluminum
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Overall length: 172mm.
Thick when closed: 13mm
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -