Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting

Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collection

Knife withdrawn from private collection - Rare model no longer in production.

The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.

The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.

The handle is made of aluminum with textured G-10 grips, providing a solid grip.

This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.

NOS FULL SET KNIFE, NEW FROM STOCK

Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratory

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like-new condition
* Commercially available Discontinued as of 2022
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present (but from a different ZT knife).
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Collection

Type of Production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thickness when closed: 14mm.
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Translated with DeepL

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, made in 2018 in only 300 pieces, individually numbered
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Original Nylon case with accessories.
* Scabbard: Not provided
* Manuals, Certificates and Warranties: Certificate with serial number and signature.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: Russia
Blade: stainless steel M390
Blade treatment: Bkacwashed
Handle: bronze anodized titanium with carbon fiber inserts
Blade length: 111mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 250mm.
Thickness when closed: 13mm.
Weight: 167g.
Closure: Frame Lock
Clip: titanium machined from solid, with Timascus insert
Notes: knife from private collection, previously purchased, made in only 300 individually numbered examples

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent condition

Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good condition

Tactical / EDC knife produced in the late 1990s withdrawn from private collection - overall in excellent condition - with factory sharpening in good condition- no packaging or manuals - checked and guaranteed by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory. 

Intended Use: Tactical/Sportsman

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: rough anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: Removable and reversible stainless steel
Packaging: cardboard box with Extrema Ratio logos

Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.

Intended Use: Collection / Heavy Duty

Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander Tactical

Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.

Intended use: Sporting / Collection

Production Type: Industrial
Blade Production: USA
Blade: CPM-S35VN Powder Steel
Blade Treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
Notes: -

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:

Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.

Intended use: Tactical/Military

Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -

Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / EDC / Collection

Type of production: semi-artisan
Country of production: USA
Blade: in CTS-XHP Black stainless steel
Blade treatment: Black PVD
Handle: Grade 5 titanium
Blade length: 92mm.
Blade thickness: 5mm.
Length closed: 122mm.
Total length: 216mm.
Thick when closed: 13.2mm.
Balancing: -
Weight: 187g.
Opening: titanium thumbstood for right-handers
Washers: Steel ball bearings
Closing: Framelock
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearings

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Microtech DOC Black - Death on Contact - Flipper Knife - Knife

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony Marfione

Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.

Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes