Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Medford Knife and Tool - Smooth Criminal - S35VN PVD Blade, Black Handles - MK039 - knife
Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!
Intended Use: Sporting/Tactical
Production Type: Mid-Tech
Country of Production: USA
Blade: stainless steel CPM-S35VN
Blade finish: PVD
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: PVD titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.MK0394PQ -
TB Outdoor - C.A.C. GIGN knife - Limited Edition - French Army - 11060099 - tactical multipurpose knife
THE CAC® GIGN - Limited Edition 250 ex.
The Intervention Groupe de la Gendarmerie Nationale (GIGN) is an elite unit of the French National Gendarmerie specializing in counter-terrorism actions, in the freeing of hostages and in special operations.
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060099 -
TB Outdoor - C.A.C. knife G10 Red - Esercito Francese - 11060046 - coltello multiuso tattico
LE CAC® scelto ufficialmente dell'Esercito Francese
Questo coltello è un vero concentrato di tutte le tecnologie avanzate che ci si aspetterebbe da un coltello operativo. La lama è in Nitrox®, con manicatura in PA6
La versione del C.A.C attualmente in dotazione all'esercito, con logo ufficiale sulla lama e impugnatura in coyote non è disponibile per la vendita al civile.
Il CAC ® è il terzo coltello prdotto dalla Tarrerias - Bonjean progettato per l'esercito francese. Il suo design senza compromessi, leggerezza e robustezza fanno del CAC® un coltello eccezionale. Molto più tecnico e ambizioso dei suoi predecessori, il CAC® è la risposta di TB alla richiesta espressa dall'esercito francese, ovvero quella di progettare un coltello robusto e ambidestro con apertura e chiusura con una sola mano. Per creare questo eccezionale coltello, Tarrerias - Bonjean ha collaborato con Philippe Perotti, ex appartenente alle forze speciali francesi e autore di decine di libri sul tiro. La sua comprovata esperienza nel combattimento corpo a corpo ha massimizzato l'efficienza dell'uso del coltello per rendere il CAC® il compagno ideale per le truppe francesi in tutti i teatri operativi. Il meccanismo di bloccaggio del CAC® è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.
TB ha anche integrato il meccanismo di bloccaggio sicuro della lama spostando l'asse sul CAC®. Questo meccanismo è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.
Il CAC® è stato ufficialmente selezionato nel 2017 dall'esercito francese, rispetto all'offerta dei competitor, per le sue prestazioni, e rapporto qualità prezzo. La sua distribuzione nei vari corpi d'armata è iniziata all'inizio del 2018 e equipaggerà in gran parte i nostri francesi almeno fino al 2022.
Perfettamente resistente alla corrosione, la lama è realizzata in Nitrox®. Il CAC® ha anche un rompivetro, un taglia cinture e una clip da cintura reversibile.
Il manico è composto da due piastre in polimero caricato con fibre di vetro. Queste piastre sono avvitate al meccanismo tramite viti in acciaio inossidabile, una delle quali ospita abilmente una lama taglia reggetta. Questa lama curva e intercambiabile è progettata per tagliare cinghie, corde e cinture di sicurezza per facilitare l'estrazione in caso di incidente.
Destinazione d'uso: collezione
Lama: in acciaio inox Nitrox® 58/59 hrc
Manicatura: in G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza totale: 238mm.
Peso: 161g.
Fodero: -
Note: design Philippe Perotti11060046 -
TB Outdoor - C.A.C. knife black - French Army - 11060052 - tactical multipurpose knife
LE CAC® officially chosen by the French Army
This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle
The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.
The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.
TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.
The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.
Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.
The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.
Intended use: collection
Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design11060052 -
Medford Knife and Tools - Smooth Criminal Flipper - PVD Blade & Black Aluminum - knife
Intended use: Tactical / EDC
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: anodized aluminum
Blade thickness: 4mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Weight: 104g.
Opening: through Carson Flipper system
Closure: Button Lock
Clip: titanium, removable, with Black PVD treatment
Packaging: cardboard box with Medford logos
Note: -M039-40AG -
Medford Knife and Tools - Praetorian Scout M/P D2 - Black PVD Blade and Black G10 - Knife
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: Usa
Blade: in D2 steel
Blade treatment: Black PVD
Handle: G10 and titanium liners 6AL4V
Blade length: 100mm.
Blade thickness: 4mm.
Total length: 230mm.
Thick when closed: 15mm.
Balancing: on the guard branch
Weight: 214g.
Closure: Liner Lock
Clip: in Black PVD stainless steel
Sheath: nylon case with zip
Packaging: cardboard box with Medford logos
Notes: Designed and built by Greg MedfordM30-0808 -
Medford Knife and Tools - Slim Midi Marauder knife - Titanium and S35VN - knife
Intended use: EDC
Type of production: artisan seeds
Country of production: U.S.A.
Blade: CPM-S35VN steel
Blade treatment: Satin finish
Handle: anodised titanium with PVD treatment
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 108mm.
Total length: 200mm.
Thick when closed: 10.2mm.
Balancing: set back
Weight: 114g.
Opening: ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: titanium, removable
Packaging: polymer tactical case with Medford logos
Notes: Skull Crasher on the shank - Designed and built by Greg MedfordMK201STD -
Medford Knife and Tools - Praetorian Genesis G - Black and Bronze - knife
Intended use: Tactical / Heavy Duty
Type of production: semi custom
Country of Origin: USA
Blade: D2 steel
Blade Treatment: Black PVD
Handle: G10 and anodized titanium
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 12.5mm.
Balancing: on guard branch
Weight: 168g.
Opening: thumbstood ambidextrous on the blade
Washers: Brass
Closure: Framelock
Clip: Titanium, Removable
Packing: Tactical Polycarbonate Case with Medford logos
Notes: Skull Crasher on the Tail - Designed and built by Greg Medford - Free Comic BookMK-GEBB -
Medford Knife and Tools - Panzer Black G10 - D2 - knife
Production Type: Custom
Production Blade: Use
Blade: Stainless Vulcan D2
Treatment Blade: -
Handle: Titanium and Black G10
Blade length: 60mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thickness when folded: 12.5 mm.
Balancing: the branch guard
Weight: 146g.
Lock: Frame Lock
Clip: -
Sheath: -
Packaging: case tactic polymers with logos Medford
Notes: Designed and built by Greg Medfordpanzer -
Medford Knife and Tools - Panzer G10 Black with Clip - D2 - knife
Medford Knife and Tools - Panzer G10 Black with Clip - D2 - knife
Intended use: Tactical / Collection
Production Type: Custom
Production Blade: Use
Blade: Stainless Vulcan D2
Treatment Blade: -
Handle: Titanium and Black G10
Blade length: 60mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thickness when folded: 12.5 mm.
Balancing: the branch guard
Weight: 152g.
Lock: Frame Lock
Clip: Titanium
Sheath: -
Packaging: case tactic polymers with logos Medford
Notes: Designed and built by Greg Medfordpanzer-clip -
Medford Knife and Tools - Praetorian G D2 Black - knife
Medford Knife and Tools - Praetorian G D2 Green - knife
Intended use: Tactical / Collection
Production Type: Custom
Production Blade: Use
Blade: Stainless Vulcan D2
Treatment Blade: -
Handle: Titanium and G10 Black
Blade length: 95mm.
Blade thickness: 5mm.
Overall length: 227mm.
Thick when closed: 13mm.
Balancing: the branch guard
Weight: 232g.
Lock: Frame Lock
Clip: Titanium
Sheath: -
Packaging: case tactic polymers with logos Medford
Notes: Designed and built by Greg MedfordpraetorianB -
Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife
Roman Ring with polished horn cattle R-RMC30A - knife
Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.
Intended Use: Collection
Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -R-RMC30A -
Medford Knife and Tools - TFF-1 Tactical Fighting Folder Black - coltello
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Custom
Produzione Lama: Usa
Lama: In acciaio D2
Trattamento Lama: -
Manicatura: alluminio e titanio
Lunghezza lama: 110mm.
Spessore lama: 5mm.
Lunghezza totale: 245mm.
Spessore da chiuso: 13mm.
Bilanciatura: sul ramo di guardia
Peso: 252g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -
Confezione: valigetta tattica in polimeri con loghi Medford
Note: Disegnato e costruito da Greg Medford10509 -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017M