Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Mil-Tac / Fox - finisher - FX-MTF5 knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Lama: PVD
Handle: G-10
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 203g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMDFX-MTF5€89.34Only 1 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Steel Will - Piercer Knife Frame by Tommaso Rumici - D2 Satin - F40-61 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Satin finish
Handle: in G10, frame and spacer in titanium
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 110g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-61€106.56Only 0 leftOut of stock -
Steel Will - Piercer Knife Liner by Tommaso Rumici - D2 Blackwash - F40-09 - Knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: in G10, internal stainless steel liners, titanium spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 98g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-09€65.57Out of stock -
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Titanium Nitride
Handle: Stainless steel, G10 and Micarta spacers
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Overall length: 227mm.
Thick when closed: 19mm.
Balancing: -
Weight: 202g.
Closure: Magnetic
Clip: -
Sheath: -
Packaging: Box of aluminum with Fox logos
Note: When closed, it can be used as a sturdy crowbar - the magnets do not allow opening and closing smooth and fast as on common balisong - deign by Jason Breeden7722€72.95Out of stock -
Mil-Tac & Fox - MTF-3 Spear - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Teflonato
Manicatura: G10
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 225mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 182g.
Chiusura: Liner Lock
Clip: acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: -7735C€112.30Out of stock -
Mil-Tac & Fox - MTF-3 Tanto - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Teflonato
Manicatura: G10
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 184g.
Chiusura: Liner Lock
Clip: acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: -7735T€112.30Out of stock