Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Ontario Knife Company - Bob Dozier Arrow Folder - 9100 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Stonewashed
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: through thumbstood, from right-handed
Washers: teflon
Closure: liner lock
Clip: stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierON9100 -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Mil-Tac / Fox - finisher - FX-MTF5 knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Lama: PVD
Handle: G-10
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 203g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMDFX-MTF5€89.34Only 1 left -
Ontario / Utilitac II - JPT-3S Drop by Joe Pardue - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe PardueAP-2798 -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Ontario Knife Company - Bob Dozier Black Arrow Folder knife - 9101 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierO9101 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Ontario Knife Company - Cerberus Titanium Folder - 1776 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON1776 -
Ontario Knife Company - Carter 2Quared Titanium Flipper - 8876 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert CarterON8876 -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Titanium Nitride
Handle: Stainless steel, G10 and Micarta spacers
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Overall length: 227mm.
Thick when closed: 19mm.
Balancing: -
Weight: 202g.
Closure: Magnetic
Clip: -
Sheath: -
Packaging: Box of aluminum with Fox logos
Note: When closed, it can be used as a sturdy crowbar - the magnets do not allow opening and closing smooth and fast as on common balisong - deign by Jason Breeden7722€72.95Out of stock -
Mil-Tac & Fox - MTF-3 Spear - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Teflonato
Manicatura: G10
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 225mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 182g.
Chiusura: Liner Lock
Clip: acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: -7735C€112.30Out of stock -
Mil-Tac & Fox - MTF-3 Tanto - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Teflonato
Manicatura: G10
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 184g.
Chiusura: Liner Lock
Clip: acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: -7735T€112.30Out of stock -
Ontario / Utilitac II - JPT-4R Tanto by Joe Pardue - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 158g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Utilitac II
Note: Design by Joe Pardue2797