Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Rick Hinderer Knives - XM-24 - Spearpoint 4.0" - Bronze Ti Custom Set - Coltello
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN 61 / 62HRC stainless steel
Blade treatment: stonewashed
Handle: titanium and G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Total length: 234mm.
Weight: 220g.
Closure: FrameLock
Clip: titanium, removable
Notes: custom version with screws and accessories in anodized bronze titanium
Additions compared to the standard model:
* Pivot screw in bronzed titanium
* 3 front screws in bronzed titanium
* 3 spacers in bronzed titanium
* Rear stabilizer lockbar in bronzed titanium
* Clip in bronzed titanium
* Clip cover in bronzed titaniumXM24TIB -
Koji Hara - Bamboo Motif - Dagger Gentleman in Mother of Pearl - artisan knife
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Harakoji-hara€729.51Out of stock -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Rick Hinderer Knives - Half Track G10 Green - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Green
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSOD -
Rick Hinderer Knives - Half Track Ti - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 125g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009STSTI -
Rick Hinderer Knives - Half Track G10 Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSBL -
Rick Hinderer Knives - XM-24 - Spearpoint 4.0 "G10 Brown - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: Spear Point CPM-S35VN Stainless Steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: titanium and brown G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Overall length: 234mm.
Weight: 220g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K30030SP20 -
Rick Hinderer Knives - XM-18 - Fatty Harpoon Both Edition Black 3.5 "G10 - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 89mm.
Blade thickness: 4.5 mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 164g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2506SGSBL -
Rick Hinderer Knives - XM-18 - Bowie 3.5 "G10 Green / Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Green / Black
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 154g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2032SGSGB -
Rick Hinderer Knives - XM-18 - Spearpoint 3.0 "Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 76mm.
Blade thickness: 3.5 mm.
Closed Length: 106mm.
Overall length: 179mm.
Thickness when closed: 11mm.
Weight: 96g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K10810SPBL -
Hinderer Knives - XM-24 - Custom Grind Slicer - Carbon Fiber with Anodized Titanium - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: handcrafted by Rick Hinderer, CPM-S35VN 61 / 62HRC stainless steel, with double concave beveling
Blade treatment: Hand satin
Handle: grip plate in the liner thickness of titanium 1mm 6AL4V 3.5mm carbon fiber with blue anodizing. Frame titanium blue anodized 6AL4V, billet, thick 4.5mm with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 100mm.
Blade thickness: 4.5mm.
Closed Length: 135mm.
Overall length: 233mm.
Thick when closed: 15mm.
Weight: 210g.
Lock: Frame Lock type
Clip: blue anodized titanium
Notes: Lanyard black paracord with titanium wire stop 6AL4V blue anodized, billet, with a diameter of 9mm, custom by Rick Hinderer12479 -
Hinderer Knives - XM-18 - Spanto 3.5" Gen IV - Carbon Fiber with Flaming Horse Clip - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: CPM-S35VN Stainless Steel 61 / 62HRC
Blade treatment: Stonewashed
Handle: grip plate in 3mm carbon fiber liner of titanium 6AL4V 1mm thick. Frame titanium 6AL4V, billet, 4mm thick with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 120mm.
Overall length: 270mm.
Thick when closed: 13mm.
Weight: 175g.
Lock: Frame Lock type
Clip: 17-4 PH stainless steel, custom by Rick Hinderer, with Flaming Horse Design
Notes: Lanyard black paracord with wire stop in 6AL4V titanium billet, with a diameter of 9mm, custom by Rick Hinderer12478 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Koji Hara - Gentleman Madreperla - coltello artigianale
Destinazione d'uso: Collezione/Gentleman
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: In acciaio inox Cowry-Y
Trattamento Lama: -
Manicatura: Madreperla e acciaio inox 316
Lunghezza lama: 60mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 81mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: Inserti in madreperla sul dorso del coltello - modello interamente realizzato a mano dal Maestro Koji Hara9014€770.49Out of stock