Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The Herring dagger is one of the most loved military knives by enthusiasts.

Its original name is Fairbairn Sykes or Commando Dagger and it was present in the endowment of the British Commandos.

A dagger that entered Italian history in World War II, thanks to the exploits of young soldiers of the 1st "Folgore" Reconnaissance Squadron, who were equipped with this weapon during Operation Herring. He has behind him a heroic piece of history that is rarely talked about, despite the fact that these young boys, thanks to their devotion to the cause and their courage, have written an important page in Italian history.

Extrema Ratio wanted to pay homage to this dagger trying to remain faithful to the original forms, while using the most modern production techniques.

The very special hand-made finish of the handle simulates the aging of brass and gives the dagger a dated look, similar to the original.

The dagger was developed in collaboration with the 185th RAO and adopted as a ceremonial commemorative dagger for the 20th anniversary of the regiment's establishment and the 75th anniversary of the Herring mission.

The knife is equipped with a polymer case with historical frieze of the F Squadron, leather / kydex sheath with brass tip and two commemorative scrolls.

PLEASE NOTE:
NE version, simulacrum replica with rounded tip and blunt blade, to allow free sale and possession according to the current regulations in force on the Italian territory.

We warn that any subsequent modifications and sharpening made to the blade modify the status of simulacrum of the Herring NE. In this case it will be subject to the regulations in force in the respective countries. Furthermore, these changes will void the Extrema Ratio warranty.

Intended use: Collection / Tactical

Type of production: Industrial
Country of production: Italy
Blade: not sharp, in stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Aged brass
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 289mm.
Weight: 276g.
Sheath: leather, ABS and brass sheath
Packaging: Polymer case with historical frieze of Squadron F and 2 commemorative scrolls
Note: -

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Microbead blasting
Handle: Walnut wood with through-guard and steel pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 350g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: -

CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente 
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio interno

El Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.

Uso previsto: táctico / militar

Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privada

Intended Use: Collection

Type of production: Handcrafted - one of a kind
Country of Production: Italy
Blade: ** NOT SHARPENED ** steel D2 at 59/60HRC
Blade treatment: Ice Brush
Handle: Micarta
Blade length: 170mm.
Blade thickness: 5.5mm.
Total length: 298mm.
Balance: advanced
Weight: 332g.
Sheath: kydex, multi-position, with MOLLE-compatible belt hooks
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: unsharpened knife, free sale and free possession

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased, 2004 first series.
* Condition: Perfect, like new
* Commercially available Out of production, replaced by the new versions.
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory




Intended Use: Tactical / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Blade finish: tumbling "Miles"
Handle: Forprene
Blade length: 170mm.
Blade thickness: 6.3mm.
Total length: 315mm.
Weight: 254g.
Sheath: ballistic rubber
Packaging: cardboard box with Extrema Ratio logos
Notes: 2004 first series specimen, with hexagonal hardware, supplied with original box all in like-new condition.

On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps in the hope of it becoming the standard weapon. In collaboration with the Marine Supply Department, the project was revised and the production of an improved combat and utility knife began.

During the war, USMC KA-BAR knives became so renowned for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.

In 2019, KA-Bar joined forces with Spartan Blades to establish Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with enhanced strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specially designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: Tungsten DLC
Handle: Kraton G with stainless steel 301 guard and Tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -

On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps, hoping it would become the standard weapon. In collaboration with the Marine Quartermaster Department, the project was revised, and production began on an improved combat and utility knife.

During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq, and Afghanistan conflicts.

In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt desired a "KA-BAR" with enhanced durability, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries, specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -

T4000 S Ranger Limited Edition is a limited series version of only 100 pieces based on the T4000 model, a reworking of the Japanese Wakizashi short sword that the Samurai carried at all times in contact with the body.

It is a timeless tactical tool that follows no fashion but faithfully adheres to the Extrema Ratio philosophy aimed at fulfilling all functional requirements.

This model continues Extrema Ratio's purest Tanto series designed especially for lovers of the Japanese blade profile, who do not want to give up typical tactical accessories such as textile sheath and special polymer handle.

The blade, made of Böhler N690 steel hardened to 58 HRC and burnished to MIL - C- 13924, features Geotech Camo customization, Extrema Ratio's innovative and original camouflage pattern made by laser engraving.

The grip, in HCS coloring, is made of Forprene, an elastomer that is part of the "NATO standard" due to its exceptional resistance to extreme conditions.

The black-colored Cordura sheath is and equipped with MOLLE system that allows its carrying on tactical vests and general belts and guarantees the safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

The T4000 S Ranger Limited Edition comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a double-grit sharpening plate (ceramic abrasive and synthetic diamond) and a metal plaque with the numbering of the limited series of 100.


Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Bohler N690Co stainless steel at 58HRC
Blade Finish: Burnishing MIL-C-13924 with Geotech pattern
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 304mm.
Weight: 264g.
Sheath: Nylon
Packaging: Polymer case, diamond and ceramic sharpener, Limited run of only 100 pieces

Magnum continues the tradition of its annual knives and presents the Collection 2023, a collector's knife with exceptional appeal. Passionate knife collectors around the world will once again be faced with the choice of whether the knife should find a place in the display case or on the belt. Lucas Burnley, considered one of the world's most renowned knife designers and who has already launched several successful knife series for Boker and Boker Plus, was won over for this special project. The knife maker from the U.S. state of Oregon knows how to combine clear lines and tactical influences in his designs like no other.

The Magnum Collection 2023 is an impressive full tang outdoor knife with a massive D2 blade that features a pronounced ricasso and an unusual two-tone finish. The designer alternates between a horizontal and vertical finish on the blade, which underscores the special appeal of the fixed-blade knife. Attention to detail also continues in the contoured handle with black polished Micarta grips that gives excellent user ergonomics for effortless work. Features include a high-quality leather sheath with two snap fasteners, an exclusive collector's box, and a certificate of authenticity. The Magnum Collection 2023 is strictly limited to 1999 pieces worldwide.

Intended Use: Collection/Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: full tang in D2 steel
Blade finish: dual tone
Handle: Micarta
Blade length: 174mm.
Blade thickness: 4.8mm.
Total length: 305mm.
Weight: 353g.
Sheath: black leather
Package: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Lucas Burnley

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: Nylon, M.O.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence

For this new collaboration between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we have chosen the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the 5 mm Sanmai V-Toku2 steel produced by the Japanese Takefu Steel instead of the Niolox used in the standard model.

Specifically, the central plate is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to guarantee not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge-holding capacity together with easy resharpening and maintenance. At the same time, the blade has a remarkable resistance to corrosion and an important increase in resilience due to the extreme steel type and rolled structure.

Translated with www.DeepL.com/Translator (free version)

Type of production: Artisanal
Blade production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Stone Edge Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: backwards
Weight: 624g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: unique and handcrafted knife

RETIRED KNIFE FROM A PRIVATE COLLECTION - 2009 edition limited to 1999 pieces
* Type: Previously purchased
* Conditions: In like new condition
* Available on the market: no longer in production, difficult to find
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, rigid case with Boker Magnum Collection 2009 logos
* Sheath: leather sheath
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 185mm.
Blade thickness: 6.5mm.
Total length: 315mm.
Weight: 515g.
Sheath: Black leather
Packaging: Rigid case with Boker Magnum Collection 2009 logos
Notes: Limited and serialized edition of only 1999 pieces worldwide

COLTELLO RITIRATO DA COLLEZIONE PRIVATA - Edizione del 2010 limitata a 1999 pezzi
* Tipologia: Precedentemente Acquistato
* Condizioni: In condizioni pari al nuovo
* Reperibile in commercio in commercio: non più in produzione, di difficile reperibilità
* Affilatura: Originale
* Segni su lama: no
* Segni su impugnatura: no
* Scatola: originale, cofanetto rigido con loghi Boker Magnum Collection 2010
* Fodero: fodero in cuoio
* Manuali, Certificati e Garanzie: originali
* Controllato e Certificato dal nostro laboratorio interno

Destinazione d'uso: Sportivo/Collezione

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox 440C
Trattamento Lama: Satinata
Manicatura: White Micarta
Lunghezza lama: 180mm.
Spessore lama: 6,5mm.
Lunghezza totale: 320mm.
Peso: 435g.
Fodero: Cuoio nero
Confezione: Cofanetto rigido con loghi Boker Magnum Collection 2010
Note: Edizione limitata e serializzata di soli 1999 pezzi in tutto il mondo

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

Intended Use: Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm. 
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -

Intended use: Collection / Outdoor

Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:

* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers

Packaging: cardboard with Aitor logos

Intended Use: Bushcraft / Utility

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 172mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 430g.
Sheath: Nylon, for thighs, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

Production type: Heavy duty hiking / Collection

Production type: Handmade
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Marble
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: set back from the guard branch
Weight: 644g.
Scabbard: Kydex, thermoformed
Packaging: unpacked, accompanied by certificate of authenticity
Notes: Each knife is unique and made entirely by hand

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight Black. Reduced in weight and more compact in size, the Tactical Eight Black is still a knife in all respects, versatile for professional users.

The sturdy Bowie blade over 17cm long and 6mm thick is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight Black with a material thickness of 2.5 millimeters provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 174mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight. Reduced in weight and more compact in size, the Tactical Eight is still a knife in all respects, versatile for professional users.

The sturdy 17.4cm long and 6mm thick Bowie blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight with a material thickness of 2.5mm provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade Finish: Moon Effect
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: backward
Weight: 644g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: unique and handcrafted knife

Production Type: Handicraft
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finishing: Marble
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: backward
Weight: 644g.
Sheath: Kydex, thermoformed
Package: -
Notes: Each knife is unique and handcrafted, there may be slight differences in finishes, colors and materials compared to the product photographed.

Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

Type of production: Artisan
Production Lama: Italy
Blade: 59 / 60HRC D2 steel
Blade treatment: GunKote Ice Brush
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: set back
Weight: 644g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Intended use: Collection / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: in steel D2
Blade finish: sandblasted
Handle: G10
Blade length: 173mm.
Blade thickness: 5mm.
Total length: 324mm.
Weight: 459g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copies - Design by Dietmar Pohl (Pohl Force)

Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

Use: Heavy Duty / Survival Tool

Type of production: Artisan
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Blade Treatment: GunKote Ice Brush
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: set back
Weight: 644g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Excursion / Sport / Survival

Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 59 / 60HRC stainless steel
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 172mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: advanced
Weight: 398g.
Sheath: in thermoformed Kydex
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manual

Machete

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 35mm.
Balancing: -
Weight: 638g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

Use: Heavy Duty / Survival Tool

Type of production: Artisan
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Blade Treatment: GunKote Ice Brush
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: set back
Weight: 644g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.

Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.

Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.

Intended use: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian Arditi

Intended use: Tactical / Military / Collectibles

Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co
Blade treatment: PVD
Handle: G-10
Blade length: 175mm.
Blade thickness: 5mm.
Length closed: -
Total length: 290mm.
Thickness when closed: -
Balancing: Set back
Weight: 262g.
Closure: -
Clip: -
Sheath: Kydex and Nylon, with M.O.L.L.E.
Packaging: Cardboard box with FKMD logos
Notes: Single edge version

Intended use: Collection

Type of production: one piece entirely handmade - number 82
Lama production: Italy
Blade: 440C stainless steel
Blade Treatment: Mirror Polishing
Handle: in giraffe bone
Blade length: 168mm.
Blade thickness: 6mm.
Length closed: -
Total length: 310mm.
Thickness when closed: -
Balancing: -
Weight: 386g.
Closure: -
Clip: -
Sheath: leather, handcrafted, hand-sewn
Package: -
Notes: Made entirely by hand

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 175
Blade thickness: 5mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balancing: 0.5 cm advanced
Weight: 320g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

Use: Heavy Duty / Survival Tool

Type of production: Artisan
Production Lama: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: GunKote Black Blood
Handle: Micarta
Blade length: 170mm.
Blade thickness: 6.5mm.
Overall length: 345mm.
Balancing: backward
Weight: 622g.

Sheath: Artisan, Kydex thermoformed, with Tek-Lok attack
Packaging: -
Notes: each knife is unique as it is handmade, there may therefore be slight differences compared with the photographed model, also with regard to shades of colors of blade and handle.

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory without any type of sharpening, so that this product is sold and released in accordance with current regulations in force in Italy.

Purpose: collecting

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: PVD
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: Rearranged
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Sharpening blade - design by Hill Knives

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory unsharpened / with dull edge; due to italians current regulations and law restrictions.

Purpose: collection

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: Satin
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: -
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Design by Hill Knives - blade with dull edge / unsharpened due to italian law restrictions

Chris Reeve - Mk IV 28 Year Commemorative knife

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

Use: Heavy Duty / Survival Tool

Type of production: Artisan
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Blade Treatment: GunKote Ice Brush
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balancing: set back
Weight: 644g.
Sheath: in Kydex, thermoformed
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

With the T4000 C continues the purest series so Extrema Ratio, for lovers of the profile of Japanese blades that do not want to give up the accessories typically tactical as sheath and handle.

Intended use: Tactical / Backup

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Bohler N690Co to 58HRC
Treatment blade: Browning MIL-C-13924
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 304mm.
Thick when closed: -
Balancing: -
Weight: 264g.
Closing: -
Clip: -
Sheath: Nylon
Packaging: Cardboard box with logos Extrema Ratio
Notes: -

Takeshi Saji was born in 1948 in Takefu (prefecture of Fukui), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji Steel products (especially damask) with which he made various models of traditional Japanese knives. The choice of materials for finishes (mostly natural), the essential lines - evocative use - and the color combinations of rare impact make his accomplishments unique and unmistakable in the panorama of the cutlery world and at home, have earned him the prestigious Master title.

Intended Use: Collection / Sports / Machete

Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: Tsuka-ito (plot typical of Japanese Katana) black cotton
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: Advanced
Weight: 510g.
Closing: -
Clip: -
Sheath: Painted wood with leather belt loop
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

With the Quebec One, Pohl Force has implemented a classic use knife that
has been high on the wish list of company founder Dietmar Pohl for more than 20 years. Finally Pohl Force has received exclusive permission of the original manufacturer to be able to use the basic design for its own interpretation. As a “Ground Forces Combat & General Purpose Weapon“ the knife was developed in the early ‚50’s for the U.S. Marine Corps.
Although never officially introduced, it was used in Vietnam -mainly in the hands of Special Forces units where it clearly demonstrated its capabilities. Pohl Force has now recreated 60 years later a modern interpretation of this classic knife which displays the optimal fusion of a classic old school design, with modern high- tech manufacturing.

Overall length: 315 mm / 12.40 inches
Blade length : 193 mm / 7.59 inches
Blade thickness: 5.9 mm / 0.235 inch
Weight: 404 g
Blade steel: Sleipner
Blade finish: MilSpec coating
Handle material: G-10
Handle thickness: 24 mm / 0.94 inch
Sheath: Kydex® plus Adapter
Included accessories: Lanyard

With the Quebec One, Pohl Force has implemented a classic use knife that
has been high on the wish list of company founder Dietmar Pohl for more than 20 years. Finally Pohl Force has received exclusive permission of the original manufacturer to be able to use the basic design for its own interpretation. As a “Ground Forces Combat & General Purpose Weapon“ the knife was developed in the early ‚50’s for the U.S. Marine Corps.
Although never officially introduced, it was used in Vietnam -mainly in the hands of Special Forces units where it clearly demonstrated its capabilities. Pohl Force has now recreated 60 years later a modern interpretation of this classic knife which displays the optimal fusion of a classic old school design, with modern high- tech manufacturing.

Overall length: 315 mm / 12.40 inches
Blade length : 193 mm / 7.59 inches
Blade thickness: 5.9 mm / 0.235 inch
Weight: 404 g
Blade steel: Sleipner
Blade finish: MilSpec coating
Handle material: G-10
Handle thickness: 24 mm / 0.94 inch
Sheath: Kydex® plus Adapter
Included accessories: Lanyard

The collaboration between the writer Nicolai Lilin and Knives Maserin was born on 987 Siberian Knife. Knife shapes typically Siberian, has blade and scabbard with designs that reflect themes and symbols tradition of this land, cold and still largely mysterious; elements also present in figurative works and tattoos created by the author of the best selling book Siberian Education, then became blockbuster thanks to the wise directed by Gabriele Salvatores.

Intended use: Hunting / Sports / Collection

Type of production: Industrial production

blade: Italian blade: 440A stainless steel blade

Treatment: -

Handle: Wood Pau Santo

Blade length: 170mm.

Blade thickness: 4.5mm.

Closed Length: -

Overall length: 293mm.

Thick when closed: -

Balance: -

Weight: 288g.

Lock: -

Clip: -

Sheath: Leather

Package: Cardboard Box

Notes: Kolima Design by Nicolai Lilin

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 440A stainless steel
Treatment Lama: Browning
Handle material: Micarta
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 395g.
Closing: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with logos Boker Magnum
Notes: -