Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-20CV 59 / 61HRC
Blade treatment: Stone Washed
Handle: Titanium sandblasted with anodized spacers
Blade length: 47.5mm
Blade thickness: 3mm.
Length closed: 72.2mm.
Total length: 122.7mm.
Thick when closed: 11.4mm.
Balancing: -
Weight: 99.8g.
Closure: Frame Lock
Clip: titanium anodized
Packaging: Blue cardboard box with Benchmade logos
Notes: Opening via Carson-Flipper system - Opening movement on ball bearings - Design by Shane Sibert

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Target: Tactical / CQB

Type of production: Industrial
Country of Origin: Taiwan
Blade: 440C stainless steel
Blade Treatment: Stone Washed
Handle: 440C stainless steel
Blade Length: 53mm.
Blade thickness: 5mm.
Total length: 135mm.
Balance: -
Weight: 57g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Boker Plus logos
Notes: DJ Urbanovsky Design

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

Intended use: Tactical / Neck

Type of production: Industrial
Production Blade: 100% USA
Blade: Titanium Beta
Treatment Blade: -
Handle: -
Blade length: 50mm.
Blade thickness: 4mm.
Total length: 76mm.
Thick when closed: -
Balancing: -
Weight: 18g.
Closure: -
Clip: -
Sheath: Kydex, thermoformed vacuum neck
Packaging: Cardboard box with logos Quartermaster
Notes: -

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.

- Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: clip ferma soldi

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Produzione Lama: Giappone
Lama: in acciaio inox AUS-8
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 50mm.
Spessore della lama: 2mm.
Lunghezza chiuso: -
Lunghezza totale: 120mm.
Bilanciatura: sul ramo di guardia
Peso: 56g.
Chiusura: Frame Lock
Clip: clip fermasoldi
Fodero: -
Note: -