Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Bastinelli Knives - Picolomako - Karambit - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 76mm.
Blade thickness: 3mm.
Closed length: -
Overall length: 187mm.
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-05 -
Al-Mar - Nomad Pocket Knife - ND-2 - VG10 - PRIVATE COLLECTION - knife
The Nomad is a classic Al Mar knife designed by Kirk Rexroat and no longer in production for years. It's a tactical folding knife with textured black G-10 handles on a stainless steel frame with a liner lock. The blade is made of VG-10 stainless steel with a flat grind and smooth edge.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased - knife no longer in production
Condition: in like-new condition
Commercial availability: difficult to find
Sharpness: factory sharpness
Blade marks: free of marks
Handle marks: free of marks
Box: original Al-Mar box
Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house Coltelleria Collini laboratory
Product DescriptionIntended Use: Sporting/Collectible
Production Type: Industrial
Blade: VG10 stainless steel
Handle: G-10
Blade Length: 95mm.
Blade Thickness: 70mm.
Closed Length: 110mm.
Overall Length: 185mm.
Balance:
Weight: 97g.
Lock: Liner Lock
Clip: stainless steelAP-ND-2 -
Al-Mar - Sere IV SOF Attack 3004/A - De Oppresso Liber - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: tactical / collection
Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened boxAL-3004/A-CP -
Bastinelli Knives - Picoeur Black knife Doug Marcaida - Scalpel Karambit Neck Knife
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox CutleryBC-07B -
Al-Mar - Payara Knife - AMPA2 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased - knife no longer in production
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Al-Mar box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria ColliniProduct description
Intended use: sports / collection
Type of production: industrial
Blade: in VG10 stainless steel
Handle: G-10
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing:
Weight: 146g.
Closure: Liner Lock
Clip: in stainless steelAP-AMPA2 -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBC-0618 -
Bastinelli Knives - Safe Folder Frame Lock - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion SteelBA-SAFE -
Bastinelli Knives - RED Dark Stone Washed - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: G10 and Titanium Darkwashed
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Closed thickness: 13mm.
Weight: 117g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Glass Breaker - Produced by Lion SteelBA-REDB -
Bastinelli Knives - BBR2 IKBS Frame Lock - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and anodized titanium
Blade Length: 85mm.
Blade thickness: 3.5mm.
Closed length: 115mm.
Total length: 195mm.
Closed thickness: 14mm.
Weight: 99g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BBR2 -
Bastinelli Knives - Big Dragotac OD Green - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and Titanium
Blade Length: 120mm.
Blade thickness: 5mm.
Closed length: 160mm.
Total Length: 270mm.
Closed thickness: 14mm.
Weight: 236g.
Opening: removable thumbnail, ambidextrous
Washers: Teflon
Closure: Framelock with additional Rotoblock security system
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BDRG -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBA-MAKF -
Bastinelli Knives - Kalinou Karambit - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01 -
Bastinelli Knives - Kalinou Karambit Black - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01PVD -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Al-Mar - Hawk Madreperla Bianca - coltello Vintage
Destinazione d'uso: CollezioneTipo di produzione: industrialeLama: in acciaio inox AUS-8Trattamento Lama: -Produzione Lama: JapanManicatura: Madreperla BiancaLunghezza lama: 61mm.Spessore della lama: 2mm.Lunghezza chiuso: 84mm.Lunghezza totale: 145mm.Bilanciatura: -Peso: 56g.Chiusura: Back LockClip: -Fodero: NylonNote: modello Vintage ormai fuori produzione2475 -
Al-Mar M50 Immigration Border Patrol knife - knife
Al-Mar M50 Immigration Border Patrol knife - knife
Intended Use: sport / collection
Type of production: Industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Production Lama: Japan
Handle: Pakkawood
Blade length: 165mm.
Blade Thickness: 4.5mm.
Closed Length: -
Overall length: 295mm.
Balance: on guard branch
Weight: 220g.
Closed: -
Clip: -
Sheath: Leather
Notes: serrated section on the back, brass guard, the US agency logo Immigration Border Patrol on the blade2915 -
Al-Mar - Payara Knife - knife
Product description
Destinazion: sportivo/collezione
Type of production: industriale
Blade: stainless steel VG10
Handle: G-10
Blade Length: 95mm.
Blade Thickness: 3mm.
Length closed: 125mm.
Overall Length: 220mm.
Balancing:
Weight: 146g.
Lock type: Liner Lock
Clip: stainless steel2916 -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401 -
Finland Ahti - Vaara - knife
Finland Ahti - Vaara - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14405