Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.



The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



Intended Use: Sporting/Collection

Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydex

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Knife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.

Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory



Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.

Intended Use: Collection / All Round Utility / Tactical

Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued item

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Excellent reproduction of one of the most iconic knives ever: the classic Bowie. A knife created by Rezin Bowie in the early 19th century for his brother Jim Bowie, the famous American pioneer whose rather reckless life is now shrouded in legend.

Livio Montagna's excellent craftsmanship does justice to this piece of history with its classic and timeless stylistic features: the double guard, the clip point blade, the handle in natural material.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: steel 440C tempered at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Buffalo - brass guard and pommel
Blade length: 197mm.
Blade thickness: 5.7mm.
Total length: 314mm.
Weight: 497g. (666g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.

Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.

The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / Allround Utility

Production type: Industrial
Country of Production: Taiwan
Blade: D2 57/59HRC carbon steel
Blade Finish: Blackwashed
Handle: G10
Blade length: 148mm.
Blade thickness: 6mm.
Total length: 285mm.
Balance: slightly backward
Weight: 433g.
Sheath: made of kydex, with Tek-Lok type attachment
Packaging: -
Notes: previously purchased knife, from private collection

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

Famous knife produced by Gerber and dating from around the 1980s, discontinued in 1999. Version with 8 teeth serration on the back. Knife taken from a private collection: very good condition. Without cardboard box. Checked by our in-house laboratory Coltelleria Collini

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: micro-peening
Country of manufacture: USA
Handle: Hypalon
Blade length: 200mm. (edge length 175mm.)
Blade thickness: 6mm.
Total length: 342mm.
Balance: on the guard
Weight: 433g. (775g. including scabbard)
Notes: Serial number 006282 - In the pocket on the scabbard is the original compass - NO BOX
Scabbard: ABS and Cordura

Translated with www.DeepL.com/Translator (free version)

Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and cordura

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

Intended use:Survival/utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: Black G10
Blade length: 150mm.
Blade thickness: 5mm.
Overall length: 226mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 218g. (418g. Sheath)
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with logos Maserin
Notes: designed by Nicolai Lilin

Designed by David Repossini, instructor of Krav-Maga with decades of experience in martial arts and combat systems in the military, was founded with the purpose of joining a blade with a survival for the fight, trying to be more effective than high knives already in business. The result is the model Outlander, a tool that can be picked up and handled in six major ways and making it adaptable to different contexts.

It is effective both for heavy work, such as cutting of a branch, is for precision work, such as making out to light the campfire. In combattimentoè well balanced, maneggevle and forms that make it effective is to strike or engage, and to achieve the most sensitive parts in extension.

The variety of grips allows feasible to do many different techniques of combat systems also bringing together elements typical of the kukri and karambit.

Intended Use: Combat Survival

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: G10
Blade length: 165mm.
Blade thickness: 6mm.
Overall length: 295mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 466g.
Sheath: Nylon with leather loop
Packaging: Cardboard Box
Notes: designed by David Repossini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory



WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo




Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.

Here are some of the reasons for the WF4 Rough Wolf design.

1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.

2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.

3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.

4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.

s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.

6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.

7. Bevel: it is very high, has impressive penetration capacity.

8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.

9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.

As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.

This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.

PAUL BOZZO