Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Maserin - Energy - Titanium Flipper Knife by Sergio Consoli - 406 - knife
Intended use: Collection / Sporting
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel 58/61HRC
Blade finish: satin
Handle: in titanium, with spacers and anodized titanium screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Closed length: 130mm.
Total length: 230mm.
Thickness when closed: 9mm.
Weight: 110g.
Lock: Frame Lock with removable stainless steel flipper
Clip: in anodized titanium, carved from solid
Notes: Opening via Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-406 -
Maserin - Solar - Titanium Flipper by Sergio Consoli - 405 - knife
Intended use: Collection / Sporting
Production type: industrial
Country of production: Italy
Blade: steel D2 58/61HRC
Blade finishing: satin finish
Handle: titanium, with anodized titanium spacers and screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thickness when closed: 9mm.
Weight: 130g.
Closure: Frame Lock with removable stainless steel clapper.
Clip: Anodized titanium, billet machined
Notes: Opening by Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-405 -
Maserin - Pitbull - Silver - Design by Sergio Consoli - 404/A - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliMA-404A -
Maserin - Pitbull - Blue - Design by Sergio Consoli - 404/B - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404B -
Maserin - Pitbull - Black - Design by Sergio Consoli - 404/N - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Locking system: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404N -
Maserin - Bulldog Flipper - Design by Sergio Consoli - 403 - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Treatment Blade: satin
Handle: titanium, with spacers G10
Blade length: 97mm.
Blade Thickness: 4.5mm.
Length closed: -mm.
Overall length: 220mm.
Thick when closed: -mm.
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Sergio ConsoliMA-403 -
Wolfpack Survival / Maserin - WP4 Rough Wolf - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory
WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD
Intended Use: Survival/Utlity
Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo
Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.
Here are some of the reasons for the WF4 Rough Wolf design.
1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.
2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.
3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.
4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.
s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.
6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.
7. Bevel: it is very high, has impressive penetration capacity.
8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.
9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.
As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.
This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.
PAUL BOZZOWP4-CP -
Maserin - Consoli I Ebano - 401/EB coltello
Consoli Design
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Ebano
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 15mm.
Bilanciatura: arretrata 2,5 cm
Peso: 106g.
Chiusura: Back Lock
Clip: -
Fodero: Busta in cuoio
Confezione: scatola in cartone con loghi Maserin
Note: Design by Consoli6004EB -
Maserin - Consoli I Olivo - 401/OL coltello
Consoli Design
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Olivo
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 15mm.
Bilanciatura: arretrata 2,5 cm
Peso: 106g.
Chiusura: Back Lock
Clip: -
Fodero: Busta in cuoio
Confezione: scatola in cartone con loghi Maserin
Note: Design by Consoli6004OL -
Maserin - Consoli I Radica Nera - 401/RN coltello
Consoli Design
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Radica
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 15mm.
Bilanciatura: arretrata 2,5 cm
Peso: 106g.
Chiusura: Back Lock
Clip: -
Fodero: Busta in cuoio
Confezione: scatola in cartone con loghi Maserin
Note: Design by S. Consoli - trattandosi di materiale naturale, la colorazione e la venatura della radica può variare da modello a modello6004RA