Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES, has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryIntended use: hunting/hiking
Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesAP-HE-600 -
Helle Norway - Utvaer by Vox - No.600 - knife
Destination: hunting / hiking
Type of production: semi-handicraft
Country of production: Norway
Blade: 12C27 stainless steel
Finishing: mirror polishing
Handle: Birch wood
Blade Length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balance: back to 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesHE-600 -
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Intended use: huntingType of production: semi-artisan
Blade: carbon steel laminate shirogami with sharp steel 62HRC
Handle: Birch
Blade length: 110mm.
Blade Thickness: 3mm.
Overall length: 230mm.
Balancing: back to 2.5cm
Weight: 154g.
Sheath: Leather
More information: http://www.lesstroud.ca/HE-301 -
Nilte - Quiete - White Mirror Wash - 20pcs Limited Edition - knife
COMFORTABLE TO WEAR !
The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.
PLEASURE OF USE
The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.
HIGH LIGHT
The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .
SCREW ANTI-SLIP
In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .
THE HOLE WITH WINGS WINGS PIVOT HOLE
This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .
CURVE LIFESAVER !
Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .
SAFETY FIRST !
The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .
THE NAME
The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.
Intended Use : Sport / EDC
Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 20 copies7287W€262.30Only 1 left -
Helle Norway - Jegermester - No.42 knife
Intended Use: Hunting
Type of production: industrial
Blade: stainless steel Sandvik 12C27
Treatment Lama: -
Handle: Birch
Blade length: 135mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 250mm.
Balance: back to 2.5cm
Weight: 128g.
Closing: -
Clip: -
Sheath: Leather
Notes: -HE-42 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Nilte - Quiete - Black Stone Wash - knife
COMFORTABLE TO WEAR !
The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.
PLEASURE OF USE
The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.
HIGH LIGHT
The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .
SCREW ANTI-SLIP
In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .
THE HOLE WITH WINGS WINGS PIVOT HOLE
This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .
CURVE LIFESAVER !
Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .
SAFETY FIRST !
The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .
THE NAME
The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.
Intended Use : Sport / EDC
Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 63 copies7287B€262.30Out of stock -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401 -
Finland Ahti - Vaara - knife
Finland Ahti - Vaara - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14405 -
Helle Norway - Dovre - No.170 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla e Corian
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata a 2.5cm
Peso: 58g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-170 -
Helle Norway - Fjellkniven knife - No.4 knife
Destination of use: hunting
Type of production: industrial
Blade: iin rolled steel with 18/8 stainless steel cheeks and 59HRC stainless steel cutting edge
Blade treatment: -
Handle: Birch
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Balancing: set back to 2.5cm
Weight: 108g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-4 -
Helle Norway - Harding - No.99 coltello
Destinazione d'uso: caccia/sportivo
Tipo di produzione: industriale
Produzione Lama: Norvegia
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: legno di betulla, palissandro ed anelli di cuoio
Lunghezza lama: 99mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 102g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone
Confezione: astuccio cilindrico di cartone più panno in cotone marchiato Helle
Note: -HE-99 -
Helle Norway - Nying - No.55 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Bilanciatura: arretrata a 2.5cm
Peso: 82g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-55 -
Helle Norway - Veidemann - No.53 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: -
Total length: 193mm.
Thick when closed: -
Balance: backward, to 1.5cm.
Weight: 98g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-53 -
Helle Norway - Wind knife - No.180 knife
Destination of use: hunting
Type of production: industrial
Blade: in stainless steel with 18/8 stainless steel and 59HRC stainless steel edge
Blade treatment: -
Handle: Birch
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 220mm.
Balancing: set back to 2.5cm
Weight: 96g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-180