Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Lurisinga - Gallurese Razor Blade - Traditional Gallura Knife - Handcrafted Knife
The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.
Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard boxLU-GAL€77.87Only 1 left -
Le Petit Jouteur - Oyster Opener Knife Set and Leather Hand Guard
Handcrafted box containing a "Le petit jouteur" oyster knife and a leather hand guard.
Leaning the handle of your "Le Petit Jouteur" oyster knife against your ear, you may not hear the lapping of the waves ...
Oyster knife with mussel shell handle
Handcrafted made in France."Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong thanks to a heat treatment process by cryogenization.
An ambidextrous, ergonomically shaped knife with a stainless steel blade that allows you to open shellfish quickly and safely.
A minimum of care and maintenance , will allow you to keep it in a state that will delight you for many years.
Included in the package is an ambidextrous hand guard made of handcrafted leather.
Weight 120 g
Dimensions 12 × 3.5 × 1.5 cm.
8169CON€65.57Only 1 left -
Acta Non Verba - Z200 - Stonewashed Sleipner - Black Aluminum - knife
We always prioritize reliability and ease of use.
Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.
Intended Use: EDC / SportyProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the groove of the blade there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z200-004 -
Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Coyote G-10 - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / SportingProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush in stainless steel
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z100-012 -
Acta Non Verba - P200 - Stonewashed N690Co - Orange G10 and Leather - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Scabbard: Black leather, sewn and handmade.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-011 -
Acta Non Verba - P200 - Stonewashed N690Co - Black G10 and Kydex - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-006 -
Sandrin knives - Torino knife FC - Recoil Lock - Tungsten Carbide Blade - Carbon Fiber - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.
This elegant knife, made with Sandrin's patented tungsten carbide blade with StaySharp Technology ™, keeps a clean and sharp edge longer than traditional steel blades.
Intended use: Sports / Collection
Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: Carbon fiber
Color: Black PVD Coating
Weight: 63 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: ItalySK-TORINO-FC -
Indiana - Miniature knife - Bowie Sitting Bull Black - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TSB€23.77Only 1 left -
Indiana - Miniature knife - Bowie Bison - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-BI€23.77Only 2 left -
Indiana - Miniature knife - Bowie Survival - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-S€23.77Only 2 left -
Indiana - Miniature knife - Sitting Bull Bowie - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TS€23.77Only 4 left -
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
No brand - Scout knife vintage - knives
Type of production: Industrial
Production Lama: Italy
Blade: 440A steel
Blade treatment: polished blade
Handle: plastic material
Blade length: 120mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 84g.
Sheath: in leather
Note: -NB-SCOUT€15.57Only 4 left -
Le Petit Jouter - Oyster Opener Knife - Walnut
Walnut oyster knife
Presitigious Oyster Opener with wooden handle.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
Wood handle from French forests .
They use wood of French origin to decorate the handles, which are machined and assembled in France.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
8169ostriche€34.42Only 1 left -
Roncola gardening made in Italy - steel blade
Robust hatchet work, perfect for gardening or work in the country.
Production Lama: Italy
Blade: stainless steel curve
Handle: Wood
Blade length: 75mm.
Blade Thickness: 3.5 mm.
Closed Length: 115mm.
Thick when closed: 26mm.
Overall length: 195mm.
Weight: 145g.
Closing: bladeless blockron-1€28.69Only 2 left -
Boss - Folder knife by David Winch - coltello sportivo
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryType of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -BO-DW€61.48Only 2 left -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
CRC - 5-56 - Olio Sbloccante Lubrificante Anticorrosivo Idroespellente
Confezione promozionale da 200ml: penetra, sblocca, deterge, lubrifica, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche.
Penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido; sblocca dadi, raccordi e cerniere.
Espelle l'umidità dalle fesure più minute. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati. Impedisce la formazione del ghiaccio.
Energico solvente di grassi, catrame e residui della combustione. Deterge carburatori, catene di moto, mozzi ruota, pistoni di ammortizzatori ecc.
Elimina i cigolii e lubrifica le parti più profonde di serrature, cardini, lucchetti, comandi a cavetto ecc..6443€12.30Only 2 left -
CRC - 6-66 Marine - Olio per arrestare e impedire la corrosione - accessori coltelli
Confezione da 200m. - Olio concepito per utilizzi marini in presenza di acqua salmastra: penetra, sblocca, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche, deterge e lubrifica.
Per attrezzature subacquee: penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido arrestanto processi corrosivi in corso unendosi polarmente ai metalli impedendone l'ossidazione, specialmente in ambiente salmastroso.
Espelle l'umidità, Elimina l'effetto cortocircuitante e la dispersioni a massa dovute agli elettroliti. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati.
Energico detergente. Elimina patine di morchia o grumi untuosi e salati che possono determinare dispersione di corrente o innescare processi corrosivi.
Riduce il coefficiente di attrito e svolge un'efficace azione lubrificante.6434€12.30Only 2 left -
CRC - Gun Store - Olio Protettivo a lunga durata - accessori coltelli
Flacone da 200ml.
Protegge spade, coltelli ed armi da fuoco durante lunghi periodi di inutilizzo.
Forma un film oleoso non essiccante che rende ogni tipo di metallo e acciaio inattaccabile da qualunque agente atmosferico. Neutralizza l'effetto corrosivo delle ceneri e del contatto con le mani. Espelle e respinge l'umidità. Al coperto ed in condizioni ambientali normali impedisce la corrosione per un periodo di circa dua anni.
Su armi da fuoco non occorre rimuoverlo pria dell'uso; in caso di necessità si può comunque asportare con CRC GUN CARE che deterge e assicura una protezione e lubrificazione più compatibile con un utilizzo costante.6432€12.30Only 2 left -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Mondin - 16cm cleaver with Collini blade cover - Kitchen knife
Recommended use: Processing raw meat, bone and cartilage.
Country of manufacture: Italy
Blade: Surgical steel 54-56 HRC
Handle: Non-toxic, non-deformable, impact-resistant Nylon 6/6, perfectly sterilizable up to 180°.
Blade length: 16cm.
Total length: 30cm.
Weight: 519g.
M16€20.49Only 3 left -
Artigiano Scarperia - Love Knife Fusetto in Deer - hand-engraved - handmade knife
In some areas of central and southern Italy, it was customary to give knives as engagement or wedding gifts, assigning the knife the task of sanctioning the love bond.
There was a strong identification between man and knife: the lover who gave such a gift to the woman symbolically offered himself, while the gift given to the man could be interpreted as an exhortation to virile valor.
Some specimens of this historical knife also served as protection against the evil eye, featuring the characteristic “dice eyes” on the handle, while the blades were traditionally engraved with decorative and symbolic elements.
The love knives were also indicative of the social class of the family: less wealthy couples, unable to afford very elaborate knives, sanctioned their love with simpler, less worked, and less expensive objects, but identical in values and meanings.
Type of production: artisanal
Blade production: Italy
Blade: Stainless steel C70
Blade treatment: -
Handle: Deer horn with buffalo horn inserts and silver plaque
Blade length: 82mm.
Blade thickness: 2mm.
Closed length: 100mm.
Total length: 183mm.
Weight: 54g.
Closure: without blade lock
Packaging: cardboard packaging with certificatesThe brand Artigiano Scarperia was established in 2007 by two expert knife makers, Fabio Gasparrini and Alessandro Conti. Drawing inspiration from ancient art, they create refined cutlery for the kitchen and table, assortments of personal care items and office supplies, as well as various objects in horn and wood. All products are handcrafted, using traditional techniques without the use of machinery.
For this reason, any variations in material and workmanship are not considered flaws, but distinctive features of a unique product, handcrafted and of high quality.
AP-CAFB€0.00Only -50 leftOut of stock -
Treeman Knives - Recon Hunter Knife - Green G-10 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratoryIntended Use: Tactical/Collection
Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -AP-TREE-RECON€0.00Only -20 leftOut of stock -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
Denis Simonutti - Mist - Limited Edition #4 - M390 Black PVD Titanium - Craft Knife
Intended Use: Collection
Type of production: Midtech
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade Treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 110g.
Closure: FrameLock
Clip: Bronze-colored anodized titanium, machined from solid
Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 piecesDS-MIST4€0.00Only -50 leftOut of stock -
Sandrin knives - Monza Zirconium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-Z -
Le Petit Jouter - Oyster Opener Knife - Oyster Shells
Oyster Knife
Presitigious Oyster Opener with handle made of stabilized oyster shells.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
A nice discovery that of this oyster knife.
At last a useful and well-designed knife.
It should be mentioned that its designer, Benjamin Auzier, is a designer at @Laguiole.
He had the good idea of surrounding himself with oyster professionals from the Mediterranean basin.
He envisioned a tool that both left-handed and right-handed people can use without risk and with formidable efficiency. His workshop is located in La Boissière, in the Hérault.
The originality of its balanced and symmetrical teardrop shape over a length of 12 centimeters suits all hand morphologies.
If you want to have a practical professional tool for opening shellfish, the Little Juggler is for you.
Or for an original gift to a family member or friend.
8169O-C€45.08Only 0 leftOut of stock -
Acta Non Verba - Z200 - Stonewashed Sleipner - Olive G-10 - knife
We always prioritize reliability and ease of use.
Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.
Intended Use: EDC / SportyProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted, stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the blade groove there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z200-009 -
Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Black Aluminum - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knifeANV-Z100-003 -
Acta Non Verba - Z100 Flipper - Black DLC Sleipner - Olive G-10 - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC treatment
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knifeANV-Z100-024 -
Acta Non Verba - Z400 - Black DLC Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding out the package is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Black DLC
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-008 -
Acta Non Verba - Z400 - Stonewashed Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding things out is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-006 -
Acta Non Verba - A200 - Black DLC Sleipner - Black G-10 - knife
Being reliable isn't easy.
If you want to be taken seriously, you have to perform over and over again. The new A200 was born to do just that; thanks to its lightweight yet durable construction, you'll almost forget you have it. Being fully ambidextrous and super safe at all times, the new A200 is the perfect EDC for your every day adventures.
Intended Use: EDC / SportyProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 60HRC
Blade Finish: Black DLC
Handle: G-10 with spacers and red anodized aluminum opening pin
Blade length: 88mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 81g.
Closing System: Ambidextrous A-Lock.
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -ANV-A200-001 -
Acta Non Verba - P100 - Black DLC Sleipner - Olive Paracord - knife
How far can you go on the path of minimalism?
The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.
Intended use: hiking / light utility / neck knifeProduction type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.ANV-P100-017 -
Acta Non Verba - P100 - Stonewashed Sleipner - Black Paracord - knife
How far can you go on the path of minimalism?
The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.
Intended use: hiking / light utility / neck knifeProduction type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.ANV-P100-002 -
Acta Non Verba - P300 - Stonewashed Sleipner - Black G10 and Kydex - knife
A simple knife that isn't afraid of rough treatment.
Sometimes you need to have a longer blade with you, whether you need to go fishing or make firewood. The P300 is a true universal workhorse that's always at your side thanks to its massive Sleipner steel blade with fantastic cutting performance. But a good tool also needs a reliable and secure handle and in our case this is guaranteed by a G10 composite handle with a rough finish and three massive screws that hold it all together for maximum performance.
Intended use: hiking / utilityManufacturing Type: Industrial
Blade production: Czech Republic
Blade: full tang, in Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 255g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -ANV-P300-014 -
Acta Non Verba - P500 - Stonewashed Sleipner - knife
We don't know where your next expedition will take you, but one thing's for sure: there's nothing more important than reliable, quality gear. In designing our flagship P500, we combined the seemingly incompatible. We ground the high-quality Swedish Sleipner steel blade at two different angles. Near the handle is a high sharpness suitable for normal cutting and finer work, while the front has a very durable low, bellied sharpness that shifts the knife's center of gravity significantly toward the tip allowing you to use it on hardwoods and materials with great power. For safe and controlled work, the back of the "five hundred" handle also widens significantly which, in combination with the grippy G10 composite surface, forms a secure and comfortable grip.
Intended use: hiking / utility
Type of production: Industrial
Blade production: Czech Republic
Blade: Full tang, made of Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 330mm.
Weight: 377g.
Scabbard: Black leather
Package: Cardboard box with ANV logos
Notes: -ANV-P500-006 -
Acta Non Verba - M311 Spelter - Black DLC Elmax - knife
We developed the M311 SPELTER knife in collaboration with members of advanced aerial observation units, close protection teams and special air operations. During the development of the knife we focused on using their experience and needs. Thanks to this unique cooperation, we had the opportunity to truly verify the quality of the chosen materials, design and overall construction of the product. The knife has been tested for a long period in extreme environments and various climates, including the hot, dry and humid areas of Asia, as well as the icy areas beyond the polar circle.
Intended Use: tactical / military / collectionType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel Elmax 60HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 275mm.
Weight: 286g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -ANV-M311-003 -
Acta Non Verba - M200 HT - Black DLC Sleipner - knife
Intended use: tactical / military / collection
Production type: Industrial
Blade production: Czech Republic
Blade: full tang, Sleipner steel 59HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 265mm.
Weight: 308g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -ANV-M200-001 -
Acta Non Verba - M73 Kontos - Cerakote Sleipner - knife
M73 Kontos incorporates all the basic components of Acta Non Verba's M-line knives. It has a carefully contoured full tang design and a lightweight handle for perfect balance. Its blade is made of Swedish Sleipner steel coated with Cerakote, with a 3D machined micarta handle. The M73 KONTOS is clearly recognizable by its hexagonal pommel, machined from an original track stop from a T-72M tank. It comes with a self-locking Kydex scabbard accompanied by a pair of spring compatible clips.
Intended use: tactical / military / collectionManufacturing Type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner steel 58HRC
Blade Finish: Cerakote
Handle: Micarta
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 265mm.
Weight: 228g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: The design of the knife is inspired by the T72M tank supplied to the former Czechoslovakian army in the 80's - The length of the blade has the same diameter as the caliber of the tank cannon - The hexagonal pommel of the knife is made using the original fasteners of the tracks of the T-72M tanks.ANV-M73-002 -
Sandrin knives - Monza Titanium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 110 mm
Handle material: Titanium
Color:
Weight: 98 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-T -
Sandrin knives - Torino knife - Recoil Lock - Tungsten Carbide Blade - G-10 Red - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades.
Intended use: Sports / Collection
Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: red G10
Color: Black PVD Coating
Weight: 64 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: ItalySK-TORINO -
Sandrin knives - Sandrin knives - Dellatorre SK-1 Slipjoint knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
The Dellatorre is an elegant knife with an innovative design that redefines the classic pocket knife. Its name derives from the Val della Torre, a city located on the picturesque foothills of Piedmont, where Sandrin knives are born and worked.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.Intended use: Sports / Collection
Total length: 180mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: ItalySK-1 -
Sandrin knives - TCK 2.0 Slipjoint knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
Sharper, thinner and harder than any blade ever made, TCK is an ultra-thin and easily portable folder.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / Collection
Total length: 198mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 80mm
Handle thickness: 6 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 60 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: ItalyTCK2.0 -
Sandrin knives - Lanzo SK-2 knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
The Lanzo, with its wave-shaped blade, is designed for cutting and slicing when you are not looking for a tipless knife. It takes its name from the winding "road" located at the foot of Piedmont, Italy, where Sandrin knives are born and made.
This sleek design made from patented tungsten carbide with Sandrin's patented StaySharp Technology ™ keeps a clean, sharp edge longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / CollectionTotal length: 180 mm
Blade length: 79 mm
Blade thickness: 0.0889 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98 mm
Handle thickness: 10.5 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slip joint
Country of production: ItalySK-2 -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Indiana - Hunting knife Gran Safari - in deer horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-CO€172.13Out of stock -
Indiana - Hunting knife Gran Safari - buffalo horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-BU€229.51Out of stock -
Indiana - Set 3 pieces miniature knives - Survival Tanto series - collection knife
Faithful miniature reproduction of survival knives produced in Italy around the 90s
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Sheath: vinyl cordura sheath
Big Knife
Blade length: 75mm.
Blade thickness: 2mm.
Total length: 130mm.
Weight: 36g.Medium Knife
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 90mm.
Weight: 15g.Small Knife
Blade length: 30mm.
Blade thickness: 2mm.
Total length: 50mm.
Weight: 3g.IN-SET1€0.00Only -20 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Desert Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-DC€401.64Only 0 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-C€401.64Only 0 leftOut of stock -
Bob Dozier - Dagger Liner Lock Folder D2 Steel - Titanium - custom knife
Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.
Intended use: Collection
Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001Dozier-SP€0.00Only -20 leftOut of stock -
Hydra Armaments - Hecate knife tactical stonewashed - craft knife
Type of production: Artisan
Lama production: Italy
Blade: integral, D2 (59-61 HRC) with cryogenic treatment
Blade treatment: satin
Handle: G10 with 3D texture
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 280mm.
Balancing: set back
Weight: 425g.
Sheath: Kydex with belt attachment and MOLLE clip attachment
Package: -
Notes: limited series of 40 pieces.HA-HED2SW€0.00Only -99 leftOut of stock -
Erapuu Antler - Lappland Carver Finland knife 62 - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: on the guard branch
Weight: 84g.
Sheath: Brown leather
Note:14550€0.00Only -20 leftOut of stock -
Erapuu Antler - Pocket Finland knife - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone
Blade length: 55mm.
Blade thickness: 2mm.
Total length: 125mm.
Balancing: on the guard branch
Weight: 62g.
Sheath: in bone
Note:14553€53.28Out of stock -
Erapuu Antler - Lappland Carver Finland knife 95 - knife
Finnish artisan knives.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone with brass bolster
Blade length: 93mm.
Blade thickness: 3mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 114g.
Sheath: Brown leather
Note:14551€0.00Only -20 leftOut of stock -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Bob Dozier - DH-FH - Black and Burgundy Micarta - handmade knife
Intended use: Sports / Collection
Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: Micarta black and burgundy, folders and spacers Titanium
Blade length: 102mm.
Blade Thickness: 3.5mm.
Closed Length: 133mm.
Overall length: 234mm.
Weight: 212g.
Lock: Liner Lock
Clip: -
Notes: made entirely by hand by Bob Dozier in 201312521€696.72Out of stock -
Max Salice Sanna - Wave - Steel SPG2 sanmai - craft knife
Craft knife produced by the famous Master cutler Italian Salice Max Sanna.
This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.
Intended Use: Collection / Gentleman
Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by MaxFor more information you can view the site sull'accaio used: www.collinisteel.com
max-wave€0.00Only -50 leftOut of stock -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Indiana - Vendetta Corsa - knife
Indiana - Vendetta Corsa - knife
Intended Use: Collection
Type of production: semi-homemade
Blade: Stainless steel 440
Production Blade: Italy
Handle: deer
Blade length: 230mm.
Blade Thickness: 3mm.
Closed Length: 270mm.
Overall length: 520mm.
Balancing: -
Weight: 444g.
Lock: back lock pump
clip:
Sheath: -
Notes: -vendetta€303.28Out of stock -
Max Salice Sanna - Goblin - Red Stamina - custom knife
Intended use: Collection / Gentleman
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel ATS34
Treatment Lama: -
Handle: Red Stamina
Blade length: 67mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Total length: 154mm.
Thick when closed: 13mm.
Balance: -
Weight: 55g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - handmade custom knife by Maxmax€0.00Only -99 leftOut of stock -
Condor - Double Bit Michigan Ax - 1060 - 61404 - work ax
L'ascia Michigan a doppio taglio perfetta per lavori pesanti.
Il manico dell'ascia è in noce. La testa dell'ascia è in acciaio al carbonio 1060.
Made in: El Salvador
Lunghezza totale: 66,0 cmLunghezza Lama: 11cm
Peso: 1.362,0 g
Acciaio lama: 1045 High Carbon Steel
Materiale manico: American Hickory
Fodero: in cuoio61404€81.15Only 0 leftOut of stock -
Bob Dozier - DH-SK - Westinghouse White Paper Micarta with Red Lines - handmade knife
Intended use: Sports / Collection
Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: White Westinghouse Micarta with red lines, folders and spacers Titanium
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 100mm.
Overall length: 178mm.
Weight: 102g.
Lock: Liner Lock
Clip: titanium, removable
Notes: totally handmade by Bob Dozier in 201112520€573.77Out of stock -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401