Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Steel Will - Piercer Knife Frame by Tommaso Rumici - D2 Satin - F40-61 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Satin finish
Handle: in G10, frame and spacer in titanium
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 110g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-61€106.56Only 0 leftOut of stock -
Steel Will - Piercer Knife Liner by Tommaso Rumici - D2 Blackwash - F40-09 - Knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: in G10, internal stainless steel liners, titanium spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 98g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-09€65.57Out of stock -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Beltrame - Tinea Kombat knife - coltello
***************************************
FUORI PRODUZIONE
NOTA INFORMATIVA: questo prodotto è presente nel nostro database unicamente a scopo storico ed informativo, non ci risulta più in produzione e pertanto non è acquistabile. Per aggiornamenti: [email protected]
***************************************
Questo kombat è stato disegnato da Ivano Beltrame e realizzato insieme al maestro Danilo Rossi, fondatore della Calix Academy Europe Club, accademia il cui scopo è la divulgazione delle tradizioni italiane nel maneggio di armi bianche e bastoni.
Dalla Paranza siciliana, alla Puntatina, al sistema Zaccagno, alla Pizzica pugliese, alla Beidana valdese, al Falcet piemontese alla Britula friulana.
Dettaglio delle scelte tecniche:
l’impugnatura con l’elsa a proteggere la mano serve a far scivolare durante il combattimento la lama all’avversario, e ci siamo ispirati sempre per restare in ambito tradizionale alla coccia del fioretto italiano.
Il foro sulla lama serve a bloccare la lama dell’avversario e a disarmarlo non con una azione di forza ma di destrezza.Lo skull krash minimalista non serve tanto a rompere quanto a strisciare sull’avversario per disarmarlo o per far leva sui tendini sempre per una azione di disarmo.
Il nome Tinea si ispira al un famoso combattente italiano Ottaviano detto er più de Roma reso celebre dal film di Adriano Celentano “ Storie di donne e di coltelli”.La scelta dei materiali il pratico acciaio N690 e lo spessore 6mm ne garantiscono la robustezza in ogni situazione; è stato testato in prove estreme di foratura e taglio senza perdere efficienza.
Il manico in G10 oltre a garantire un ottimo grip e anche efficace conduttore in caso di scossa elettrica.
Al momento è disponibile con copertura teflon in grado di evitare sia in diurna che in notturna quelle situazioni di rifrangenza durante l'utilizzo.
Il fodero è stato studiato sia per attacco in cintura ma soprattutto da posizionare con un pettorale proprio in copertura ¾ del cuore con uno sgancio rapido per situazioni critiche, difficilmente i foderi posti in altre zone garantiscono una immediatezza di copertura in caso di attacco.
Destinazione d'uso: Militare/Tattico/Collezione
Tipo di produzione: industriale
Lama: 58-59HRC N690
Trattamento Lama: teflonata
Produzione Lama: Italia
Manicatura: G10
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza totale: 295mm.
Bilanciatura: sul ramo di guardia
Peso: 370g.
fodero: in cordura con attacco ascellare
Note: Design by Danilo Rossi7224€204.09Out of stock -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401 -
Finland Ahti - Vaara - knife
Finland Ahti - Vaara - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14405