Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Stangen - 501 - Abrasive Paste for Hone
Stangen 501 abrasive paste is an ideal product for sharpening hones of various sizes. It is a high-quality abrasive paste formulated to easily remove rust, dirt, and impurities from hones, allowing them to precisely sharpen razors. The paste is easy to apply and ensures effective cleaning of hones, enabling them to last longer. Thanks to its abrasive formula, Stangen 501 paste is able to sharpen hones gently, preserving their shape and characteristics.
Brand: Stangen
Pack composed of two blocks (each measuring 38x9x9 mm, weighing approximately 8 grams) of hone paste with two different grit sizes.
2804€6.97Only 10 left -
Steel Will - Piercer Knife Frame by Tommaso Rumici - D2 Satin - F40-61 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Satin finish
Handle: in G10, frame and spacer in titanium
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 110g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-61€106.56Only 0 leftOut of stock -
Steel Will - Piercer Knife Liner by Tommaso Rumici - D2 Blackwash - F40-09 - Knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: in G10, internal stainless steel liners, titanium spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 98g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-09€65.57Out of stock -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401 -
Finland Ahti - Vaara - knife
Finland Ahti - Vaara - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14405